Check the MSI Twin Fan for a 3070 that'll fit the Velka 5: https://www.msi.com/Graphics-Card/GeForce-RTX-3070-TWIN-FAN/Overview
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Production Velka series cases for ultra compact and portable desktops
- Thread starter VELKASE Michael
- Start date
Damn, the new Velka 3 looks awesome! I really like the idea of spacing the panels out to get quieter operation, that is super clever. Really looking forward to the release 
Hey everyone, it has been quiet lately. Do know that the Velka 3, 5, and 7 cases and ENP-7660B power supplies are in transit from Asia and I'm expecting to start shipping these out in January.
Late answer but I'll post for others to see. I haven't tested this Zotac card although it should physically fit into VK5 rev 1 as well as the newer ones, judging by the dimensions and photos on their website.
Late answer but I'll post for others to see. I haven't tested this Zotac card although it should physically fit into VK5 rev 1 as well as the newer ones, judging by the dimensions and photos on their website.
That's great to hear. This batch will be the same rev2.0 revisions without any change and only the PSU will be different black with sorter cables?
Damn. Went to preorder it as I got excited of the stock info and also got a few works finally.
Velka 3 + black enhance psu. 259.99 usd.
shipping to Hungary 115.21 usd.
upon entering the country import + vat 2.5% + 27%. 110.68 usd.
485,88 usd for a velka 3 + psu to get in Hungary.
Well maybe I'll just wait for that possible EU store with lover shipping and no import/vat from within the union.
Yet again I would like to ask about revision suggestions. I would have liked to get a honeycomb version not a round one. Is it set in stone that the cutout will be round later on and the front will be vented or if I wait I will still be able to buy a honeycomb vented one with a solid front panel? I know no magic crystal orbs to tell the future just wondering about your opinion if this would maybe be possible.
Velka 3 + black enhance psu. 259.99 usd.
shipping to Hungary 115.21 usd.
upon entering the country import + vat 2.5% + 27%. 110.68 usd.
485,88 usd for a velka 3 + psu to get in Hungary.
Well maybe I'll just wait for that possible EU store with lover shipping and no import/vat from within the union.
Yet again I would like to ask about revision suggestions. I would have liked to get a honeycomb version not a round one. Is it set in stone that the cutout will be round later on and the front will be vented or if I wait I will still be able to buy a honeycomb vented one with a solid front panel? I know no magic crystal orbs to tell the future just wondering about your opinion if this would maybe be possible.
The honeycomb vents and solid front panel will remain available as the default even if other vent styles are introduced sometime in the future.
Thank you! That's great to hear. I will hold on the purchase then until there is an European shop.
GeForce RTX 3070 EAGLE OC 8G definitely fits on Velka 5 Rev 1.0.
I just install it and with little undervolting temps hover on 76 C with fans running at 70%
I just install it and with little undervolting temps hover on 76 C with fans running at 70%
What fan curve did you use? I have the same card but had to underclock as well to reach similar temps + fan speed. Something like 830mV at 1770MHz off the top of my head. That's in my Node 202 with a 5600x + L9a, temporary situation until my Velka 7 arrives.
Use MyUS and if you have a Mastercard, you get 2 years free premium membership (20% cheaper than free account), although not sure if that promo is still on. Shipping to Thailand with FedEx International Priority is around $40.
up to 76 C I have at 75% and at 83C I set it at 100%
Occasionally the fans ramp up to 90% but only for a few seconds, under heavy gaming.
I believe I also got a good chip, boosts at 2010 MHz at 0.938v
On the bottom on the motherboard side.
page 14.
page 14.
Something like this:Does anyone know where I can find a replacement power switch? I broke mine
Sliger Cases/Lazer3D LZ7 and LZ7 XTD/NFC Skyreach 4 Mini 16mm Anti-Vandal Switch Power Button
16mm Anti-Vandal switch power button replacement for Sliger SM Series & SV590/Lazer3D LZ7 and LZ7 XTD/NFC Skyreach 4 Mini. Button is illuminated with your choice of a white, blue, or red LED. Switches are made 380mm in length. Installation is a quick process for all cases, simply unscrew and...
www.pslatecustoms.com
Similar threads
