Thanks for the suggestion! Im curious if any type of decent air cooler would fit in there :/If i were you i will consider a celsius s24 with radiator on front with 25mm fans, BUT with shorter tubes...definitely a very good option with your four titan V (gg on that, you will a tremendously powerful Cerberus-x..)
As you are going to a micro atx variant with no offset in pcie slots, i recommend you celsius s24. Its native long tubes are great to put radiator on the bottom. Furthermore you can easily shorten tubes length if required..
Noctua c14s, on air cooling, should be possible but i’m not sure of clearance between heatsink and gpu, as you don’t have a pcie 1x as offset before gpu.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Chimera Industries Cerberus: The 18L, mATX, USA-made enclosure
- Thread starter PlayfulPhoenix
- Start date
Thanks for your analysis...this is giving a nice picture, at least for Intel socket.oh wow the previous comment I made was a disaster. here's the correct ones:
First worry would be RAM clearance, but normal height RAM should easily go under it (my setup for RAM reference)
For AM4 (like mine), I must admit that i had very low clearance between my C14s and GPU...i guess it won't work without 1st pci slot offset :
After, at my knowledge, there is no AM4 micro atx board with no offset (ie with sli compatibility)
Oh really? Will something like the Dark Rock Pro 3 or NH-D15S fit too? and will the c14s and U9S fit with the psu placed in the back or the front?noctua U9S or noctua C14S will fit..
Not a chance. Maximum height is around 145mm without side bracket. Cryorig h7 is the tallest cpu cooler inside cerberus.Oh really? Will something like the Dark Rock Pro 3 or NH-D15S fit too? and will the c14s and U9S fit with the psu placed in the back or the front?
"YOU WILL ARRIVE AT THE GATES OF VALHALLA, SHINY AND CHROME!"
Couldn't resist..
Couldn't resist..
oh wow imagine the panels in chrome o_oCHROME
Next update on my build log for Marc - "Chrome panels, tempered glass, AND LEDS"
Cleaning NIGHTMARE!!
Nice Try..
Thanks for the support..
But my next update on my setup is imminent, I should be able to share by tomorrow.
guys, I just bought a Cerberus XxX, do you it's possible to SLI 2x AIO watercooled Gigabyte AORUS 1080 Ti Waterforce? the reason being I suffer from a condition that can't take any noise and this is a Xmas present for myself. SLI for the sake of SLI. Thanks
Last edited:
Should be doable, plus a CPU AIO. Your case will definitely be crowded with all that tubing! Not sure how quiet 2 (or 3) AIO pumps and fans will be.
Thank you for your help! May go with c14s
also, would a mini itx or micro atx board be best for the cerberus? Between ASUS Z370-I and z370-G
Main concern will be tubes length...I doubt about it to be honest.
ORDERED!
CerbX, Slate, rear psu plate , handle kit.
May wrap it and put it under the tree and open it like a screaming 6 year old in front of the family.
“Ermagherrrd Cerberrrs Eerrrks!”
CerbX, Slate, rear psu plate , handle kit.
May wrap it and put it under the tree and open it like a screaming 6 year old in front of the family.
“Ermagherrrd Cerberrrs Eerrrks!”
Last edited:
Please record that for the world to see the kind of true joy that a Cerberus could bring them.
Similar threads
