That should work. There is also a ssd mount above the I/O shield
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
If you're using ITX board, I reckon there's plenty of room between the PSU and motherboard due to ITX being narrower than ATX. Should be enough room there for at least a few drives stacked on top of each other using 3M tape
It could just barely fit behind the GPU if it doesn't have very thick back plate (do not do it if GPU has no backplate):
But I wouldn't be to comfortable with that arrangement.
There is not enough space between ITX mbo and SFX psu for 3.5, but there is for 2.5.
But I wouldn't be to comfortable with that arrangement.
There is not enough space between ITX mbo and SFX psu for 3.5, but there is for 2.5.
Well this case is something like 45% of Cerberuses volume, so you can't expect same level of compatibility. To get the best picture, I would recommend comparing specifications an compatibility on official websites:
Product Page | SFF time
www.sfftime.com
Cerberus X | Sliger
Sliger Designs is a manufacturing company based in the United States specializing in computer cases and systems.
Thank you for ordering! You can find the answer in the post above.
Yeah, that looks like a bad idea. Feeding heat directly from the GPU into the HDD sounds like a recipe for premature drive failure.
Well that is one way to ensure you won't have to worry about trying to fit a 3.5 inch drive into your SFF builds for very long...
I can't seem to see the internal layout when using an E-ATX motherboard and compatible PSU? I have an x299 dark that would be great in my server but I'm worried about it fitting 
I can't seem to see the internal layout when using an E-ATX motherboard and compatible PSU? I have an x299 dark that would be great in my server but I'm worried about it fitting
No prob, I will post later!
I'll be using a ZOTAC GAMING GeForce RTX 2060 AMP.
No overclocks, completely stock. Card only draws 170W of power, so if it fits I'll probably try it and then monitor temps.
Also, has a metal backplate that barely gets warm to the touch. Using it as a game drive so honestly not the end of the world if it gives out sooner than later, was wanting to upgrade to a 4TB at some point anyways and if temps are crazy I guess I can always go with an external dock.
Thanks for the reply!
I can't seem to see the internal layout when using an E-ATX motherboard and compatible PSU? I have an x299 dark that would be great in my server but I'm worried about it fitting
There you go ?
I just checked again with riser, I think will be a no go :| Sorry.
Should be Saturday, more info such as exact time will be in the mail for the subscribers.
Hi, do you have any renders for a 2.4 slot gpu and matx/atx motherboard? 5.25cm though.
Hi, with ATX/MATX the limit is 2 slot. This case can fit strix cards only up to gtx1070/1080 which are strict 2 slot.
Oh and if someone is interested in B-stock version of any color please PM me, they have just minor cosmetic defects and you can get them right now! Not many units though.
