Production REVOCCASES - RCC-MID1 | industrial style case with 180mm fan and rad support

[REVOCCASES]

120mm AIOs tested and working.

If using SFX PSUs, you might choose some AIO with softer or shorter tubes though. Or do some modding and shorten the tubes yourself. Well, you'll know what to do. I've seen AIOs in smaller cases.

Thermals: R3800X @ full load: ΔT = 47°C

 

[rocklobster]

120mm AIOs tested and working.

If using SFX PSUs, you might choose some AIO with softer or shorter tubes though. Or do some modding and shorten the tubes yourself. Well, you'll know what to do. I've seen AIOs in smaller cases.

Thermals: R3800X @ full load: ΔT = 47°C

120mm AIOs tested and working.

If using SFX PSUs, you might choose some AIO with softer or shorter tubes though. Or do some modding and shorten the tubes yourself. Well, you'll know what to do. I've seen AIOs in smaller cases.

Thermals: R3800X @ full load: ΔT = 47°C

Is the fan on the radiator running in push or pull?

 

[REVOCCASES]

Is the fan on the radiator running in push or pull?

The small fan pushes air against the rad. The big fan helps to pull hot air out of the case.

 

[REVOCCASES]

custom dual rad loop assembly tested and working

I´ve also put a handle on it ?

meet the new portable watercooled gaming rig:

 

[oOflyeyesOo]

Where is the pump?!? What size tubes. I was contemplating connecting the back rads like that also, trying to figure out the order.

 

[att1cus]

Where is the pump?!? What size tubes. I was contemplating connecting the back rads like that also, trying to figure out the order.

Pump is built into the CPU block on this one if I'm not mistaken. Super simple loop that just circulates from pump to rad to rad to pump I think.

 

[REVOCCASES]

Pump is built into the CPU block on this one if I'm not mistaken. Super simple loop that just circulates from pump to rad to rad to pump I think.

Correct. I just use the cpu pump block from the 120mm Aio from my previous test.

 

[REVOCCASES]

What size tubes. I was contemplating connecting the back rads like that also, trying to figure out the order.

It's 10mm ID tubes but I'll change to 8mm because the connection to the cpu pump block is not tight enough from my POV.

The order doesn't really matter as I've learned from some tests on YouTube.

 

[REVOCCASES]

/see first post update/

 

[tinyitx]

What you will get:

• four universal AIO/Fan mounting adapters
• screws, etc...
• free German beer from me in Lan Kwai Fong on the day of purchase (if you reside in HK)

Fixed this for you. ?

 

[REVOCCASES]

Fixed this for you. ?

? I´d love to but I´m stuck in 中山 at the moment... well, corona...

 

[oOflyeyesOo]

Killer deal! Pumped for the black.

 

[REVOCCASES]

Black Anodized founders edition (5 pcs): HKD 665,- (ca. EUR 75,-) plus shipping

Available in 1 to 2 weeks.

 

[tinyitx]

? I´d love to but I´m stuck in 中山 at the moment... well, corona...

You can still come back but you just want to avoid the 14-day home quarantine period. Right?
TVB news last night reported that many people are , just like you, stuck in Zhongshan, Dongguan etc because their factories are there. So, they are in a cycle of sleeping, working in the factory and eating.
Hopefully, this COVID-19 health code certification will be mutually recognized between Mainland and HK soon.

BTW, have you lived in HK long enough to become a resident? Do you get this $10,000 'relief' money from the government?

 

[REVOCCASES]

You can still come back but you just want to avoid the 14-day home quarantine period. Right?
TVB news last night reported that many people are , just like you, stuck in Zhongshan, Dongguan etc because their factories are there. So, they are in a cycle of sleeping, working in the factory and eating.
Hopefully, this COVID-19 health code certification will be mutually recognized between Mainland and HK soon.

BTW, have you lived in HK long enough to become a resident? Do you get this $10,000 'relief' money from the government?

Seems I can't send you PM for some reason ...

 

[tinyitx]

Seems I can't send you PM for some reason ...

I have disabled my inbox for everybody...lol (I have been stalked before by crazy people in other forums and so I am extra cautious.
No need to answer any personal question...I am not offended at all...and I apologize if I have asked improper questions...was just curious.
Hope you stay healthy and come up with some good SFF designs.

 

[REVOCCASES]

I have disabled my inbox for everybody...lol (I have been stalked before by crazy people in other forums and so I am extra cautious.
No need to answer any personal question...I am not offended at all...and I apologize if I have asked improper questions...was just curious.
Hope you stay healthy and come up with some good SFF designs.

No problem. It's totally fine to ask these questions. Just wanted to keep the thread clean (at least a bit) and thought better use PM for off-topic questions/discussions

 

[REVOCCASES]

Hello and apologies for the late update concerning your pre-orders... It's the very first batch of this case so everything still moves a bit slower then I'd like to.

Today your cases with black anodizing have been finished and everything is ready for shipping.

I will send you your PayPal payment links within next week so that all pre-orders can be shipped by end of next week.

Thank you again for your patience and your great support for this project.

 

[oOflyeyesOo]

Looking sexy!!

 

[oOflyeyesOo]

I got my MID in and custom picopusu! Looks beautiful! I am still waiting on my radiators, picking up power supply this week, then we can get started! Dual 200mm rads, with CPU and GPU in loop. 4 180mm fans in total!

Get ready!

Edit: the smearing in the top left corner is probably just butter the kids left on the table, cleaned off the rest...