News Gigabyte/ASUS/GALAX RTX 4060 Low Profile

Legion · Jul 21, 2023

If it was me I'd go for the Lazer3D CG7 Cravo.
Yes, it's a little bit more than the others.
It has superb versatility, great little boxes.
@K888D 's attention to detail is top notch in all his cases.

K888D · Jul 21, 2023

Legion said:
If it was me I'd go for the Lazer3D CG7 Cravo.
Yes, it's a little bit more than the others.
It has superb versatility, great little boxes.
@K888D 's attention to detail is top notch in all his cases.

Thanks for the shoutout, I can't take credit for the CG7 though, it was designed by the very talented @owliwar

Stifle · Jul 22, 2023

I picked up an LLW workshop V36pro case through superbuy a few months back (as well as a V21/V26) and I think this might just fit, I measure 182mm of clearance and I have 180degree 8-pin adapters but the shroud beyond the last fan could be trimmed a bit and still have plenty of room even without 8pin adapters.

robbee · Jul 22, 2023

Stifle said:
I picked up an LLW workshop V36pro case through superbuy a few months back (as well as a V21/V26) and I think this might just fit, I measure 182mm of clearance and I have 180degree 8-pin adapters but the shroud beyond the last fan could be trimmed a bit and still have plenty of room even without 8pin adapters.

There's a heatpipe under the shroud, I think you can shave off about 4mm max.

jeshikat · Jul 24, 2023

Arboreal said:
Jolokia? That's a name I haven't heard in years... Still serving you will I hope.

It was my daily driver until I moved a year ago. But I'm really looking forward to the new Cities Skylines so I think I'll rebuild it.

Stifle · Jul 24, 2023

robbee said:
There's a heatpipe under the shroud, I think you can shave off about 4mm max.

Thanks for pointing that out. Ill be picking one up to attempt a build with everything I have in my work PC only replace PSU with HDplex GaN, 3060ti FE with this 4060 and Loque ghost with LLW v36 pro.

Gingerbeer · Jul 25, 2023

Kinda hoping @robbee is wrong and @K888D 's guesstimate is on the mark...

... my ZS A4DC has a smidge under 183mm between the front and back panels.

Analogue Blacksheep · Jul 25, 2023

If it is too long, short of bringing out Mr Dremel, would be curious to see what cooler mods will be produced to address that.

Gingerbeer · Jul 25, 2023

Analogue Blacksheep said:
If it is too long, short of bringing out Mr Dremel, would be curious to see what cooler mods will be produced to address that.

I meant that it'd be a straight swap-out - no need to print a shorter shroud or otherwise faff about.

mishmash · Jul 25, 2023

Well, looks like I already have an upgrade plan for my A2000 CG7 that has only just hit the testing and tuning step!

Stifle · Jul 26, 2023

Just measured the inside of my V36pro case and I am hoping to be able to get this card into 182mm ><

GucksTV · Jul 29, 2023

Any insider news on where the pictures have been sourced from? Is it a real product or are my hopes up and will be disappointed?

Stifle · Aug 1, 2023

The healthy thing to do would be to assume this is not true at all and possibly be pleasantly surprised

Snerual · Aug 1, 2023

Personally I am only 10% confident this will actually ever become available through official retail channels in Europe and the US.
I think there is a 50% chance this is some prototype that will never be released, and a 40% chance this is some weird China-only semi-custom thing that maybe, just maybe, might surface on TaoBao 6 months from now.

Stifle · Aug 3, 2023

Product page is up on Gigabyte website

GeForce RTX™ 4060 OC Low Profile 8G Key Features | Graphics Card - GIGABYTE Global

Discover AORUS premium graphics cards, ft. WINDFORCE cooling, RGB lighting, PCB protection, and VR friendly features for the best gaming and VR experience!

www.gigabyte.com

182mm length confirmed (Exactly what I need lol).

Analogue Blacksheep · Aug 3, 2023

182mm in length

ZS A4DC V3
ZS D2 (D Config)
Lazer3D HT5
Lazer Cravo
J-Hack Pure MK2
Metal Fish S2
Bug C1

Gingerbeer · Aug 3, 2023

Analogue Blacksheep said:
182mm in length

ZS A4DC V3

Should also just fit in my ZS A4DC v1, with about 0.5mm of clearance. Ooof, that's tight.

Stifle · Aug 3, 2023

Analogue Blacksheep said:
182mm in length

ZS A4DC V3
ZS D2 (D Config)
Lazer3D HT5
Lazer Cravo
J-Hack Pure MK2
Metal Fish S2
Bug C1

Also the V36 pro from LLW Workshop on TaoBao which is similar to the V32 Pro but with a double slot, half-height GPU area, looks like a cut down version of the ZS D2-D. Literally zero clearance

Analogue Blacksheep · Aug 3, 2023

We're going to be in for some very interesting builds in the future. Kind of curious to see if someone ends up making a case that fits this and the HDPLEX 500W unit.

Gingerbeer · Aug 3, 2023

Analogue Blacksheep said:
We're going to be in for some very interesting builds in the future. Kind of curious to see if someone ends up making a case that fits this and the HDPLEX 500W unit.

Should be doable with the 250W unit too, with a wee bit of undervolting to keep things sensible. Thinking of my 5600G, pulling 65W max, but more like 40-45w under gaming loads.

News Gigabyte/ASUS/GALAX RTX 4060 Low Profile

Airflow Optimizer

SFF Guru

Average Stuffer

King of Cable Management

Jessica. Wayward SFF.n Founder

Average Stuffer

SFF Lingo Aficionado

King of Cable Management

SFF Lingo Aficionado

Trash Compacter

Average Stuffer

Airflow Optimizer

Average Stuffer

Cable-Tie Ninja

Average Stuffer

King of Cable Management

SFF Lingo Aficionado

Average Stuffer

King of Cable Management

SFF Lingo Aficionado

Similar threads