Chimera Industries Cerberus: The 18L, mATX, USA-made enclosure

[Chann3l]

So I took a chance and ordered the Ncase bottom filter. If it fits I will mention it here so noone else has to take a chance. I know I could have just measured and had them custom make one but I ordered from Amazon so it would get here faster.

 

[MarcParis]

Any suggestions for fan filters?

https://www.ebay.fr/itm/2x-120mm-Co...-Fan-Case-Cover-Dust-Filter-Mesh/182281834885
Very good filter, well suited for bottom of cerberus.
They are also cheaper than demciflex.

 

[rapscallione]

No. Outside of using double-sided tape the brackets are needed.

Woof. You'd think at least one 3.5 bracket/cage would be thrown in, seeing as it is a premium ATX size case, whereas smaller premium ITX cases have brackets by default. Oh well, what's another 50 dollars at this point.

 

[3lfk1ng]

In general, after seeing all the build threads people have posted, I get the feeling that most Cerberus users have opted for m.2 SSDs so to help lower the cost of this case, the 3.5" mounts are sold separately for the few that still require them.

 

[Chann3l]

Woof. You'd think at least one 3.5 bracket/cage would be thrown in, seeing as it is a premium ATX size case, whereas smaller premium ITX cases have brackets by default. Oh well, what's another 50 dollars at this point.

50 dollars? The bracket is 15

 

[3lfk1ng]

Maybe he wants to put 6x 3.5" drives in his case?

 

[Chann3l]

Maybe he wants to put 6x 3.5" drives in his case?

Maybe and not to be rude but if that's the case I think there needs to be a bit more thought put into how that's going to impact airflow.

 

[VegetableStu]

my brain suddenly went “custom bottom face with hot-swap SAS bays”

portable unraid server o_o

 

[MarcParis]

my brain suddenly went “custom bottom face with hot-swap SAS bays”

portable unraid server o_o

Your brain is surprising..

 

[rapscallione]

Maybe and not to be rude but if that's the case I think there needs to be a bit more thought put into how that's going to impact airflow.

Definitely a concern, only need three 3.5s though. Each bracket holds 2 drives? That's good to know.

And yes this is kind of a strange use case, most of my work is music production so having 3.5 drives is crucial, since SSDs are cost prohibitive and unnecessary for multiple terabytes of samples. Will be going with the M2 drive as the OS drive. The general upgradeability of ATX/ not super tiny (hot) cases like the NCase or Dan is the draw here.

 

[Sancus]

I didn't use them for anything, but what are the big self-tapping screws supposed to be for, anyway?

 

[Chann3l]

I didn't use them for anything, but what are the big self-tapping screws supposed to be for, anyway?

Lol I'm curious too, I had no idea what to do with these.

 

[minhbao92]

Hi guys. Between the white and red cable, which one is for power switch and which is for LED? Thanks!

 

[Sancus]

Hi guys. Between the white and red cable

white is power switch, red is led.

 

[TheHig]

Lol I'm curious too, I had no idea what to do with these.

Those are fan screws. I used them for my 120mm Fan on the side bracket.

 

[KSliger]

I didn't use them for anything, but what are the big self-tapping screws supposed to be for, anyway?

@TheHig is right, fan screws.

 

[Chann3l]

Just wanted to post my build log, work in progress of course.

https://smallformfactor.net/forum/threads/z370-kimera-cerberus-build.6192/

 

[Ankacat]

Those are fan screws. I used them for my 120mm Fan on the side bracket.

@TheHig is right, fan screws.

I'm slightly terrified now, I may have used screws that look a lot like those to mount my 3.5" HDD in the bracket... it seems to be ok...

 

[VegetableStu]

might you have tapped the HDD screw threads...? o_o

 

[Ankacat]

might you have tapped the HDD screw threads...? o_o

It's entirely possible, though when I was rearranging things in my build today I removed the drive from the bracket entirely and didn't notice anything that seemed unexpected, or shrapnel.