News Gigabyte/ASUS/GALAX RTX 4060 Low Profile

Gigabyte is creating an RTX 4060 low-profile card: https://www.tomshardware.com/news/g...-be-the-first-low-profile-ada-lovelace-design

3 fans, single 8-pin, 2 slots.

Pie in the sky, but would love to see an RTX 4060ti (or more crazy RTX 4070) model at some point.

___

16/01/2023 Addendum

ASUS now has a 4060 Low Profile card.
188mm, triple fan.

ASUS GeForce RTX™ 4060 LP BRK 8GB GDDR6

www.asus.com

___

19/04/2024 Addendum

Galax has a card
182mm, triple fan, but the PCIE cable is at the front which will affect clearance without a custom solution.
Will advise to look for something slightly bigger

GK-RTX4060-E8GB/WHITE/LPの取扱を開始しました | GK-RTX4060-E8GB/WHITE/LP | 玄人志向 NVIDIA GeForce RTX 4060 搭載 ロープロファイル対応 グラフィックボード | 玄人志向

PCパーツブランド 玄人志向のGeForce RTX 4060 搭載 ロープロファイル対応グラフィックボードです。 Boostクロック：2475MHz、8GB GDDR6 メモリ、DisplayPort 1.4a x2/HDMI 2.1a x2

www.kuroutoshikou.com

Cases these will fit into (double check before you buy, not everything is available):

Lenovo P3/P360 ULTRA - 182mm* - Gigabyte (May require modding)/Adapter Needed
ZS A4DC V3 - 182mm* - Gigabyte (May require modding)
ZS D2 (D Config) - 182mm - Gigabyte/GALAX (Possible PCIE cable issue)
Gemcase C9 - 182mm - Gigabyte/GALAX (Possible PCIE cable issue)
Lone Industries L5 - 185mm - Gigabyte/GALAX (Consider PCIE adapter)
Custom_Mod SL3 STL 4.8L Rev.1 - 185mm - Gigabyte/GALAX (Consider PCIE adapter)
n3rdware Yocto - 185mm** (Guidance rather than a limit) - Gigabyte/GALAX (Consider PCIE adapter)
n3rdware Yocto+ - 185mm** Guidance rather than a limit) - Gigabyte/GALAX (Consider PCIE adapter)
ZS D2 V2 - 186mm - Gigabyte/GALAX (Consider PCIE adapter)
Custom_Mod Case MINI LP edit. - 190mm - Gigabyte/ASUS/GALAX (Consider PCIE adapter)
J-Hack Pure MK2 - 190mm - Gigabyte/ASUS/GALAX (Consider PCIE adapter)
Lazer3D HT5 - 194mm - Gigabyte/ASUS/GALAX
Lazer3D Cravo - 195mm - Gigabyte/ASUS/GALAX
CAPTAIN CASE V9 - 208mm - Gigabyte/ASUS/GALAX
REVOCCASES N0RDR1 Nano EVO - 210mm - Gigabyte/ASUS/GALAX
Metalfish 2 Plus - 210mm - Gigabyte/ASUS/GALAX
LZmod A24-V5 V2.0 - 220mm- Gigabyte/ASUS/GALAX
Silverstone Milo ML03 - 223mm - Gigabyte/ASUS/GALAX
Silverstone Milo ML04 - 223mm - Gigabyte/ASUS/GALAX
Metalfish G5 - 245mm*** - Gigabyte/ASUS/GALAX (MATX Board width)
Bug C1 - 245mm*** - Gigabyte/ASUS/GALAX (MATX Board width)
SKTC A10 - 245mm*** - Gigabyte/ASUS/GALAX (MATX Board width)
Silverstone Milo ML11 - 272mm - Gigabyte/ASUS/GALAX

 

[Legion]

If it was me I'd go for the Lazer3D CG7 Cravo.
Yes, it's a little bit more than the others.
It has superb versatility, great little boxes.
@K888D 's attention to detail is top notch in all his cases.

 

[K888D]

If it was me I'd go for the Lazer3D CG7 Cravo.
Yes, it's a little bit more than the others.
It has superb versatility, great little boxes.
@K888D 's attention to detail is top notch in all his cases.

Thanks for the shoutout, I can't take credit for the CG7 though, it was designed by the very talented @owliwar

 

[Stifle]

I picked up an LLW workshop V36pro case through superbuy a few months back (as well as a V21/V26) and I think this might just fit, I measure 182mm of clearance and I have 180degree 8-pin adapters but the shroud beyond the last fan could be trimmed a bit and still have plenty of room even without 8pin adapters.

 

[robbee]

I picked up an LLW workshop V36pro case through superbuy a few months back (as well as a V21/V26) and I think this might just fit, I measure 182mm of clearance and I have 180degree 8-pin adapters but the shroud beyond the last fan could be trimmed a bit and still have plenty of room even without 8pin adapters.

There's a heatpipe under the shroud, I think you can shave off about 4mm max.

 

[jeshikat]

Jolokia? That's a name I haven't heard in years... Still serving you will I hope.

It was my daily driver until I moved a year ago. But I'm really looking forward to the new Cities Skylines so I think I'll rebuild it.

 

[Stifle]

There's a heatpipe under the shroud, I think you can shave off about 4mm max.

Thanks for pointing that out. Ill be picking one up to attempt a build with everything I have in my work PC only replace PSU with HDplex GaN, 3060ti FE with this 4060 and Loque ghost with LLW v36 pro.

 

[Gingerbeer]

Kinda hoping @robbee is wrong and @K888D 's guesstimate is on the mark...

... my ZS A4DC has a smidge under 183mm between the front and back panels.

 

[Analogue Blacksheep]

If it is too long, short of bringing out Mr Dremel, would be curious to see what cooler mods will be produced to address that.

 

[Gingerbeer]

If it is too long, short of bringing out Mr Dremel, would be curious to see what cooler mods will be produced to address that.

I meant that it'd be a straight swap-out - no need to print a shorter shroud or otherwise faff about.

 

[mishmash]

Well, looks like I already have an upgrade plan for my A2000 CG7 that has only just hit the testing and tuning step!

 

[Stifle]

Just measured the inside of my V36pro case and I am hoping to be able to get this card into 182mm ><

 

[GucksTV]

Any insider news on where the pictures have been sourced from? Is it a real product or are my hopes up and will be disappointed?

 

[Stifle]

The healthy thing to do would be to assume this is not true at all and possibly be pleasantly surprised

 

[Snerual]

Personally I am only 10% confident this will actually ever become available through official retail channels in Europe and the US.
I think there is a 50% chance this is some prototype that will never be released, and a 40% chance this is some weird China-only semi-custom thing that maybe, just maybe, might surface on TaoBao 6 months from now.

 

[Stifle]

Product page is up on Gigabyte website

GeForce RTX™ 4060 OC Low Profile 8G Key Features | Graphics Card - GIGABYTE Global

Discover AORUS premium graphics cards, ft. WINDFORCE cooling, RGB lighting, PCB protection, and VR friendly features for the best gaming and VR experience!

www.gigabyte.com

182mm length confirmed (Exactly what I need lol).

 

[Analogue Blacksheep]

182mm in length

ZS A4DC V3
ZS D2 (D Config)
Lazer3D HT5
Lazer Cravo
J-Hack Pure MK2
Metal Fish S2
Bug C1

 

[Gingerbeer]

182mm in length

ZS A4DC V3

Should also just fit in my ZS A4DC v1, with about 0.5mm of clearance. Ooof, that's tight.

 

[Stifle]

182mm in length

ZS A4DC V3
ZS D2 (D Config)
Lazer3D HT5
Lazer Cravo
J-Hack Pure MK2
Metal Fish S2
Bug C1

Also the V36 pro from LLW Workshop on TaoBao which is similar to the V32 Pro but with a double slot, half-height GPU area, looks like a cut down version of the ZS D2-D. Literally zero clearance

 

[Analogue Blacksheep]

We're going to be in for some very interesting builds in the future. Kind of curious to see if someone ends up making a case that fits this and the HDPLEX 500W unit.

 

[Gingerbeer]

We're going to be in for some very interesting builds in the future. Kind of curious to see if someone ends up making a case that fits this and the HDPLEX 500W unit.

Should be doable with the 250W unit too, with a wee bit of undervolting to keep things sensible. Thinking of my 5600G, pulling 65W max, but more like 40-45w under gaming loads.