Production Velka series cases for ultra compact and portable desktops

[Nu2SFF]

The NH L9a; as far as I'm aware that's the only heatsink that will fit in the VK-3. I currently have overclock disabled in mine, what about yours?

For the 3600, the Jonsbo HP-400 is a better cooler for lower temps than the NH L9a

 

[AZengus]

For the 3600, the Jonsbo HP-400 is a better cooler for lower temps than the NH L9a

You are right! That one slipped my mind; I think I skipped it after realizing it would take 2+ weeks to ship to the US

 

[sid21177]

The possibility of support for DC-ATX power supplies with external AC-DC adapters and 2 mm extra maximum graphics card length. There will not be any changes to existing features or the current appearance of the case yet.

Please do consider slits instead of fixed HDD holes on the rear L-panel

 

[ondert]

For the 3600, the Jonsbo HP-400 is a better cooler for lower temps than the NH L9a

Does it fit inside Velka 3?

edit: ok, found it. 36mm height, looks promising. I was wondering if it could be enough for 3700x.

 

[Nu2SFF]

Does it fit inside Velka 3?

edit: ok, found it. 36mm height, looks promising. I was wondering if it could be enough for 3700x.

It's enough at stock for sure because the 3700X is a 65W TDP. How much are you looking to overlock?

 

[ondert]

It's enough at stock for sure because the 3700X is a 65W TDP. How much are you looking to overlock?

Overclock? Nooo, I have no intention of overclocking, in reverse, I think to undervolt a bit. 3700X seems a bit more than 65w chip. So, I have read that NH-L9 struggles to keep the chip under 80 celcius degree. I was looking for a better cooler at the same height.

 

[DeXeD]

Hello together I'm new here in the forum. I am waiting for my Velka 5, it is the customs in Germany.
I have a 3700x with a Cryorig C7G running at 4.1GHz at 1.175V to about 75 °C.

 

[potato]

Is it possible for rev 1.2 of the Velka 3 to support 80x25mm case fans at the top?

 

[duynguyenle]

Is it possible for rev 1.2 of the Velka 3 to support 80x25mm case fans at the top?

I would even be content with 80x15mm fans, the options are pretty limited at 80x10mm (at least I couldn't find many options)

 

[VELKASE Michael]

It will only support 10 mm thick fans.

 

[smitty2k1]

How much vertical height is there in the Velka 3's power supply area? I know the FlexATX is 40mm tall, but is there an extra couple mm down there for say the Meanwell 400w RPS-400-12-C (43mm with case supposedly).

 

[VELKASE Michael]

How much vertical height is there in the Velka 3's power supply area? I know the FlexATX is 40mm tall, but is there an extra couple mm down there for say the Meanwell 400w RPS-400-12-C (43mm with case supposedly).

41.5 mm from the bottom of the case to the edge of the motherboard tray. The riser needs about 1 mm.

 

[Marzipan]

your website doesn't appear to be working? it's loading a field to enter a password for maintenance?

 

[VELKASE Michael]

The website is currently being updated. Access will be restored soon.

 

[BrziHR]

I am located in Croatia. Does the case ship only from the US or do you have a warehouse in europe?

 

[VELKASE Michael]

I am located in Croatia. Does the case ship only from the US or do you have a warehouse in europe?

Everything ships from the US.

 

[smitty2k1]

I am located in Croatia. Does the case ship only from the US or do you have a warehouse in europe?

I'll be visiting your beautiful country in October, I am very excited!

 

[VELKASE Michael]

Website is back up. Case descriptions are more detailed, there are 3D models that can be rotated, and there is now a separate pre-order page.

 

[Kundahli]

Website is back up. Case descriptions are more detailed, there are 3D models that can be rotated, and there is now a separate pre-order page.

What is the estimated ship date on the VK3 and VK5 if one were to pre-order this month?

 

[VELKASE Michael]

What is the estimated ship date on the VK3 and VK5 if one were to pre-order this month?

The current estimate is October 23, however it may change. The most up-to-date estimate will be posted on the pre-order page.