Hi What sort of aluminium strips are those? You just super glued them to the panel? Looking for a solution, as my side panel magnetic strips don't stick properly.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Production Nouvolo Steck - SFF 8.7-11.2L ITX PC Case, supports liquid cooling
- Thread starter macbosco
- Start date
Hi What sort of aluminium strips are those? You just super glued them to the panel? Looking for a solution, as my side panel magnetic strips don't stick properly.
Please send direct message via nouvolo website about your specific orders. This thread is for build related discussions
Alphacool Eisbaer LT (Solo) - Black
Die beliebte Eisbaer LT als AiO-Wasserkühlungsvariante gibt es nun auch in der Solo-Ausführung. Damit hast du die Möglichkeit deine eigene AiO-Lösung ganz nach Wunsch zu gestalten. Denn alle Anschlüsse verwenden das, aus dem...
www.alphacool.com
Just use this brand for build its give out easy connection thought tube as well.
this only 39mm high.
OMG! guys, FINALLY, someone did a build with Asetek. AIO without stack expansion! Come on guys! Show your imagination! ? It can be done!
Last edited:
OMG! guys, FINALLY, someone did a build with Asetek. AIO without stack expansion! Come on guys! Show your imagination! ? It can be done!
I think this is a good idea for the next revision of the case - but it best be an adjustable mount to raise the PSU bracket (probably additional mounting holes for height adjustment) because I believe it was originally placed with enough clearance on top for a 240mm AIO tube to drop/hang properly with a stack unit in place.
Strips are here: They were super glued.
I glued them with the height matched so that the aluminum would rest against screws in the bottom holes. The screws were very small, smaller than M3. I think they are the ones used to attach SSDs.
Hmm in case amazon link doesn't work, the description is "ImpressArt Bracelet Blanks, 1" x 6", Aluminum- 5 Pack"
Thank you! This is exactly what I was looking for. Now to wait for my case and the release of the 3700X...
Can I use a cpu block that's 62mm high? I see the page where a cooler (air) up to 70mm but 60 for water cooling? I scrapped my original plans and go with swiftech apogee drive v2.
Now I have the idea of possibly running a slim 120mm rad and slim noctua fan under that.OMG! guys, FINALLY, someone did a build with Asetek. AIO without stack expansion! Come on guys! Show your imagination! ? It can be done!
70mm clearance will be for air cooling or liquid cooling, doesn't matter which type. So it totally depends on how tall Swiftech Apogee is, according to some info height is ~62mm, which CAN fit in the Steck.
And seems Optimum Tech managed to fit Apogee into Ghost, so it should be comfortable with Steck.
Last edited:
First time poster here.
Finally build my PC (R7 2700 + Thermalright AXP-100RH + GTX 1070 Strix) inside the Steck and the build process was a breeze (the YouTube videos were very helpful!).
In terms of hardware compatibility this case checks all marks for those looking to air cool their systems.
The only thing that I did not like as much is how the top and side panels are mounted to the main body.
I move my PC frequently and the only way to lift the case is by its sides, which make the side panels slide upwards.
It would be nice if there are set of "screwable" panels available for the case, which (I guess) would also help align all the other pieces correctly.
This would ruin the screw-less exterior of the case (I'm just asumming this was the reason to go the magnetic route) but would make the case very easy to travel with.
Other than that, this case is awesome! Thank you @Nouvolo team!
Finally build my PC (R7 2700 + Thermalright AXP-100RH + GTX 1070 Strix) inside the Steck and the build process was a breeze (the YouTube videos were very helpful!).
In terms of hardware compatibility this case checks all marks for those looking to air cool their systems.
The only thing that I did not like as much is how the top and side panels are mounted to the main body.
I move my PC frequently and the only way to lift the case is by its sides, which make the side panels slide upwards.
It would be nice if there are set of "screwable" panels available for the case, which (I guess) would also help align all the other pieces correctly.
This would ruin the screw-less exterior of the case (I'm just asumming this was the reason to go the magnetic route) but would make the case very easy to travel with.
Other than that, this case is awesome! Thank you @Nouvolo team!
I think the gigabyte windforce is about the only 3-fan card that's only 2-slot thick and less than 305mm in length. All of the strix, aurus, and msi tio cards are 2.5 slots or thicker, and the PNY 3-slot and msi duke are 314mm long.
OK, another user gave me an idea of size comparison props : A roll of toilet paper.
Who thinks this is better than a coke can? ?
Who thinks this is better than a coke can? ?
