design

  1. Platypus

    Introduction Creating Tomorrows SFF Case

    Hey there all. I have built my PC's and fallen into the rabbit hole of design, only to be led on to this forum where I have felt the need to bring up the idea of creating a case that stands out from the rest. I will post more later on as design continues. The goal is to create something for...
  2. B

    Concept Premium wooden ITX Case - 8.5L

    Okay so basically the idea came to me since I travel a lot and I want to design an ITX case similar in volume and layout to the popular Ghost S1 and Dan Case A4. The thing is I HAVE NEVER BUILT A PC BEFORE and all the knowledge I have about everything is from youtube videos, reddit/sffpc and...
  3. iAvoe

    Concept 8.7 Liter 320*85 Case with 120*38 Rad+Fan "CLDS" V2

    It didn't took me long, but a huge amount of brainstorm to get an upgraded version of this project, now it's named CLDS referring Clundus, a random name that also took me long to generate :) Disclaimer: I don't own this design As you can see, the drawing is much better, and the tilted GPU...
  4. Theez

    Production Theez Designs - HUMBLE - customisable sub 7L cube case

    After the introduction post it only felt right to share with you an in depth look and some key information about HUMBLE. The case is now in production and available to order at www.theezdesigns.com Clearance info page: You can get HUMBLE in any color you wish, even differently colored...
  5. OliverRH

    Concept Small ATX Case with focus on design - under 18.5 liter!

    Hi guys, long time no see. I am back with a new version of my small form factor ATX case, this time it is this a 3D render, but I will start making a prototype in a week or so :) The case measures H37.1 cm x D36.6 cm x W13.6 cm = 18.467 liter. So just under 18.5 liter. This case is a little...
  6. M

    What Software Do You Use?

    Hello, I'm interested in designing and building my own case. Hell, I'm open to making them for the masses especially with the current CaseLabs predicament. After looking through theses forums I'm curious to know what exact software people have used to do their initial design work? I've had...
  7. F

    Concept 13L 360MM Watercooled Concept

    UPDATE 1: https://smallformfactor.net/forum/threads/13l-360mm-watercooled-concept.7212/#post-93772 I've been looking for a nice looking case that can be done with a custom loop, either 2x 240mm or a 360mm and above. This case would fit full GPU cards, along with a 30x120x360 Radiator with 25mm...
  8. 3feetcat

    Introduction Kevin is back! with more 3d models.

    I'm back. With new name: 3feetcat 2018 4 4 For those who didn't know me. I am nobody, you don't have to know who I am, just remember my work. https://grabcad.com/kevin.yu-7 If you have this link in your bookmark, then that's me. I started to post high-quality 3D models on GrabCAD for free...
  9. macbosco

    Production Nouvolo Steck - SFF 8.7-11.2L ITX PC Case, supports liquid cooling

    About Nouvolo Steck We believe that everyone of us, including creative professionals, gamers, streamers, youtubers, programmers and regular computer users should enjoy the best performance without compromising aesthetics, size and flexibility. Initially we set out to make a product that we would...
  10. ondert

    Concept Different uSFF idea with Flex ATX psu --> Flexpy

    Hello SFF guys, Firstly I want to tell you that I don't know nearly anything about CAD softwares and just drew this on an online CAD website which wasn't useful. For now, I have only an idea to make a case about 3.14 liters (if not possible, at least around 3.5 lt) including low profile dual...
  11. HgArg

    Mini-ITX and GTX 1080 case concept design

    Hi SFF community! I made a concept of a cube design case, this is the main idea: Approximate dimensions: 210x210x350 mm. It allows to use standard parts, Mini-ITX motherboard + GPU up to 270 mm + normal PSU (150x140x86 mm): (No GeForece GTX 1080 Founders Edition is shown in the picture)...
  12. HgArg

    Fully 3D printed custom case (update)

    Hi comunity of SFF. I designed and made my first SFF case. In this case I used AutoCAD to designed because I needed to see if all the parts will fit on the case, I don't have any idea about components. I had two first conditions: use a MIni-ITX motherboard and a low profile graphic card (for...