I don't think the reservoir will fit. Although the reservoir/pump combo unit is only 67.5mm (H) and the case has 70mm height clearance, it will be very tight with the tubing coming out on top. It will need a very sharp bend...
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Production Nouvolo Steck - SFF 8.7-11.2L ITX PC Case, supports liquid cooling
- Thread starter macbosco
- Start date
I don't think the reservoir will fit. Although the reservoir/pump combo unit is only 67.5mm (H) and the case has 70mm height clearance, it will be very tight with the tubing coming out on top. It will need a very sharp bend...
They do have a pump with a lower profile.
https://www.overclock3d.net/reviews/cases_cooling/alphacool_eisbaer_lt_240_review/4
https://www.alphacool.com/download/EisbaerLT_Datasheet_EN.pdf
Here's the low profile version.
Seems like it would work depending on if the rad will fit.
Here's the low profile version.
Seems like it would work depending on if the rad will fit.
Got most of my part in today. The cooler I order hasn't arrived yet. =( The Stock AMD cooler can only be mounted one way. Because of the vram heatsink on the motherboard. The AMD log also block one of the ram slots. Hope I get my new cooler in the next few days. Bad luck with the monitor crack screen. There was no damage to the monitor box only a little bit of damage to the shipping box. The shipping box was way bigger then the montior box so i guess it got bashed around while shipping. Good thing I order off of amazon. They are sending me out a new one.
Last edited:
I see an 1080Ti AMP card there please check the length of the card, hope it's not AMP extreme. Watch out the case only fits 300mm. I worry most gfx cards with 3 fans are too long...
Last edited:
Hey @macbroso! While we are on the topic of sizing compatibility, will everything in my current build fit okay? Note that the listed 92mm fan is an upgrade to the L12, and the 2TB 2.5” SSD is to replace, not complement, the current 2.5” SSD that I have.
https://pcpartpicker.com/user/Hifihedgehog/saved/bYYWD3
https://pcpartpicker.com/user/Hifihedgehog/saved/bYYWD3
Last edited:
Ram can be a bit tight and make sure it’s L12 and not L12S
Rest should be ok. Don’t think can fit another case fan in there
Cool! It works just like I thought it would, but I wanted to double check with you first to be sure I had all my ducks in a row. Also, I had posted before getting in some other details in, but I have since updated the previous post with more information. The build at present is all purchased and in use including the L12 with the tall RAM which fits in my RVZ02. That means the tall Trident Z DDR4 RAM is indeed compatible with the L12 albeit there is only 2mm or so to spare. The 92mm Delta fan is a more powerful fan, an upgrade over the much slower stock fan in the L12.
Last edited:
My build is ready for this case! Bring it on- let's do it
Curious to know if the testers have been contacted?
Curious to know if the testers have been contacted?
Is only just an AMP 300 x 148 x 43.5mm and not the AMP extreme
Probably Thur/Fri. I will go to China again to final check before they leave factory for the shipping agent. Then there is no turning back.
Hopefully everything looks good at the factory and we can start seeing some sweet builds soon!
This case turn out to be very similar to the Loque, but for some reason I think this one has a better aesthetic than the Dan and Loque. Good luck in China !
BTW just a heads up to those signed up. About the "last" black one, there may be some minor scratch marks at the screw areas (inside the case, external is fine). As I have used it to shoot installation video, and I tried to ship out as many as possible to you guys. I will let the person know when I send the email. In case he doesn't want it, it will go to the next in line.
Last edited:
Would the Alphacool Eisbaer LT 240 fit in this? (I think It has a slightly larger protrusion off the radiator than most AIOs)
Everything ready to go. For those lucky ones expect email soon.
What a beautiful sight and likely a deep feeling of accomplishment! You have explained before that this is not final packaging. Do you have some preliminary package designs in mind? Or is that something you will be sorting out closer to or during the Kickstarter?
Check your email.
There is still hope if you haven't received email yet.
Currently there is still 1 pink left. And I may offer slot to people further down the line if I don't get a reply by 1 Nov.
pm me if you are interested in the pink
There is still hope if you haven't received email yet.
Currently there is still 1 pink left. And I may offer slot to people further down the line if I don't get a reply by 1 Nov.
pm me if you are interested in the pink
Last edited:
