Prototype Free Flow CPU Pump Block

[Nykwil]

It was TERRIBLE! Very high pitch compared even to the LAING 3.25 PMW. The best one until now IMO is the LAING T1 plus PMW. I keep it between 25 and 50%!

Thanks! You've saved me a lot of guesswork. Now to source a Laing T1 and mod it for PMW

 

[gwertheim]

Thanks! You've saved me a lot of guesswork. Now to source a Laing T1 and mod it for PMW

They have a pwm pump

Alphacool Laing DDC-Pumpe 12V DDC-1T Plus PWM

Alphacool Laing DDC-Pumpe 12V DDC-1T Plus PWM AC-49135

www.performance-pcs.com

 

[Gerold]

Currently rocking the bykski DDC pump top, but it takes away pretty much space in the GPU side.
I'd be very interested in an option with a little res (like you mentioned out of stainless for instance).
This concept looks really good, can't wait to build a loop around it in my T1.

 

[incunabula]

@Nouvolo Aquanaut will most likely launch before this project.

I think this type of block really could use a Reservoir built in to make it easier for people. That's the game changer on the Barrow block. The trick is that both POM and Acrylic is too weak to allow the thin walls necessary for the 48mm height limit. I'm thinking maybe just making the whole thing out stainless or copper to integrate reservoir.

This really would be a game changer, and an insta-buy from me. Now that I have the T1, this is the missing piece.

 

[grinny]

I'm eagerly waiting for this one, any update on the apprx. release date?

 

[incunabula]

Still a lot of interest here if this project isn't dead.

 

[tessoftheriver]

Still a lot of interest here if this project isn't dead.

agreed!! Wahaha360 is this still something you're contemplating? I'm down for anything you come up with

 

[Cajo76_pt]

Already have a T1.
So a lot of interest here.
Any dates for sales?

 

[Dahmos]

Uhhh... I´m very interested!! I´m still waiting for a pump/cpu block combo with max 48mm which is strong enough for 2x240 rads and CPU+GPU loop.

 

[incunabula]

The suspense...

 

[Wahaha360]

I'm working on it during February break, so no update until then, right now just collecting radiators and other pump blocks to use for testing reference.

 

[AP2]

I'm working on it during February break, so no update until then, right now just collecting radiators and other pump blocks to use for testing reference.

@Wahaha360, I have tons of radiators I can test if you need.

koolance 240/120, xspc tx240/120, hardware labs gts 240/120, HJ 240/120, magicool and alphacool st25 are enroute as well.

 

[thelaughingman]

@Wahaha360, I have tons of radiators I can test if you need.

koolance 240/120, xspc tx240/120, hardware labs gts 240/120, HJ 240/120, magicool and alphacool st25 are enroute as well.

radiator hoarder alert!

 

[Wahaha360]

@Wahaha360, I have tons of radiators I can test if you need.

koolance 240/120, xspc tx240/120, hardware labs gts 240/120, HJ 240/120, magicool and alphacool st25 are enroute as well.

Are you based in Asia? HK or CN?

I might take the TX 120 if XSPC doesn't mail my goodies box.

I have pretty complete set for HWL and EK

 

[AP2]

@Wahaha360 in the US.

 

[incunabula]

I'm working on it during February break, so no update until then, right now just collecting radiators and other pump blocks to use for testing reference.

This is very exciting