ncase m1

  1. K

    NH-L12S with 120x25mm fan better than U9S copycat cooler in my testing

    I modded an Arctic P12 120x25mm fan so it'd fit under a NH-L12S then threw it in my Ncase M1. Previously I had the ID-Cooling SE 914 XT (Noctua U9S copycat) with a Noctua 92x25 mounted on the cooler, and another Noctua 92x25 mounted on the rear of the case. Both of the Noctua fans were set to...
  2. K

    Discussion Benchmark request for someone with a completely air cooled Formd T1 with a 5600X/3070 FE

    I tried finding someone in the sffpc reddit but didn't have any luck so I'm trying here... I would greatly appreciate it if someone with an air-cooled T1 with a 5600X/3070FE could do a specific Cyberpunk 2077 test for me. I have benchmarks from an Ncase M1 and Acat X2 and am curious how my...
  3. br0qn

    Log Dual Rad m1 - Project "Long Time Dreamer - First Time Builder"

    New thread for my initial build plan which moved from here. Parts short list case ncase m1 mobo strix x570i cpu 5600x gpu 3070fe ram 32gb 3600mhz ballistix storage 500gb wd black pcie4 boot drive / 1tb wd black pcie3 storage Full parts list (with eye watering tabulation) here...
  4. ghop

    Log 10900k + 2080 Super / Ncase M1 / Air Cooled / Build Complete Log

    Welcome to my build log. I will add updates below as Spoilers with date of update. Photos included. CPU: Intel Core i9-10900K 3.7 GHz 10-Core Processor CPU Cooler: Noctua NH-C14S 82.52 CFM CPU Cooler Thermal Compound: Thermal Grizzly Conductonaut 1 g Thermal Paste Motherboard: MSI MEG Z490I...
  5. MultiDoc

    Ncase M1 v6.1 build log (X570, 3950x, 2080Ti, semi-water cooled)

    This will be my second build in the Ncase M1 (current PC in my sig below), this time using the v6.1. Spent a couple months gathering parts and reading extensively on similar builds and difficulties and problems that might arise and finally gathered all the parts for it. The most difficult was...
  6. Creep

    Asetek 645LT vs Air in a new NCASE M1 - Opinions?

    Bought a NCASE M1 v6.1 and have 2 options for cooling a 9900k and a 2080 Ti 11GB Asetek 645LT paired w/ a Noctua NF-A9x14 or Noctua NF-A9 Chromax Either of these Noctua air coolers - NH-U9S or NH-C14S (with interchangeable fans) Also, I desire the Chromax color scheme but don't mind mixing and...
  7. caboose

    Ncase M1 Custom Looped for Silence

    What's up everyone, I just finished my latest build using the Ncase M1 v6 and some fresh AMD goodness. My previous system was in a Dan A4 and it was great for portability but it was loud as hell under gaming and firing anything up in handbrake immediately pegged the CPU at 95c. Unfortunately...
  8. YKQian

    Buying NCASE M1 with ODD slot: top panel alone or whole case. V2 or later.

    Proposed payment: Top panel: USD 25 + shipment Whole case: USD 150 + shipment Preferred payment method is PayPal.
  9. S

    Build Advice (NCase M1 v6)

    Hello everybody, this is my first attempt of building a SFF PC having build only towers or mid-towers for almost 20 years ( damn you Optimum Tech xD ) I already have at home a shiny new ncase M1 v6 and i was waiting for black Friday or other discounts to buy all the parts i need. i'm a web...
  10. BeachBanjo

    Help with Cooling Solutions in Ncase M1

    So I am considering building my first SFFPC in the Ncase M1, I have already purchased the v6, just waiting on shipping. Now, I imagine I MUST air cool this thing, since it will be travelling on international flights and I don't want to run into any problems or have to check it in. However, this...
  11. J

    NCase M1 V6 (Parts Help) - First time SFF

    Hey! Just pre-ordered my first SFF case and really excited! But I'd like some help deciding parts/cables and things. https://ca.pcpartpicker.com/list/JDWZx6 (The case is just placeholder to help with my cost calculations, budget about 3200 CAD after our 13% tax) So, in terms of portability...
  12. W

    Suggestions for ncase m1 build

    Hi all, about to attempt my first sff build, so i'm a bit of a newb when it comes to this, curently gathering parts together and eagerly awaiting for the ncase m1 to go on order. So far I've got or considering AMD Ryzen 7 3700X with Wraith Prism Corsair SF600 Platinum 600W SFX Power Supply...
  13. C

    3900x 2080ti V6

    Hey guys new here not really sure where to post this so be kind haha. I’ve just pre-ordered the v6 it’s my second PC and first SFF build. I’ve been searching the internet and every answer seems to go in one ear out the other so what would to “best” option for a 2080 ti be? What card has the...
  14. S

    NCASE M1 and Noctua C14S?

    Hello guys, I plan to buy this case in the future for my new build. I bought the NH-C14S with another NF-A14 fan because I thought it would fit but I'm not really sure. Can you put NF-A14 fan on the panel anduse the NH-C14S as a low profile (the fan below the heatsink)? I am not sure and kinda...
  15. T

    NCase M1 custom watercooling; component choice discussion

    I am planning on building in a Ryzen 3000 system in the NCase M1. My target achieving silent operation with high performance by mounting a 240mm below the GPU and another 240mm on the AiO bracket all connected with soft tubing. I would like to use quick disconnects to be able to take out the GPU...
  16. B

    question on compatibility

    I was planning on doing a build in the Ncase M1 and wanted to do a custom water loop following what Ive seen on this forum. I recently saw the computex ITX boards and was interested in the Impact MDTX board. I know it will fit in the M1 but I was wondering if it would still have clearance at the...
  17. N

    Best air cooler with the hdd

    Hello I'm new to this forum and I'm interested in getting the ncase m1! I was wondering what is the best air cooler for the m1 with using the hdd on the bracket. I'm going to be moving 2 of my hdd to the bracket. I'm also hoping the hdd bracket is still available for the next version as I see...
  18. madmax

    Measures of the tubing pass-throughs of M1?

    I'd appreciate if someone could tell me the following measures of the M1's tubing pass-throughs at the back, as these specs are quite difficult to find. What is the diameter of the pass-throughs without the rubber grommet? What is the distance between the pass-throughs, center to center? I'm...
  19. Voldorac

    Cooling AIO Cooler Swap

    Hello! Has anyone tried to swap out a AIO Cooler head pump with tubes, from a bigger radiator to a 92 mm Alphacool Radiator, to fit in one of your systems? Or do I have to learn everything I can about "Custom watercooling" and spend hundreds of $? I'm using a Ncase M1 Specs: Ncase M1...
  20. I

    Will Morpheus II work in M1 with a Radeon VII

    Hi folks, not sure if this is the best place to ask but I've got my ncase M1 on order (SO FRIGGING EXCITED TO BIN THE TT CORE V1!) and I want to put my Radeon VII in it. I know that the GPU fits but the other issue is the noise that thing makes. Does anyone know if the morpheus ii core will fit...