Stalled DICE CASES - FLOW : expandable SFF case for watercooling enthusiast (built in distroplate)
- Thread starter diceboii13
- Start date
It only depends on how big the reference 30xx series will be. If will follow the 20xx route you should be fine with the 2 slot for a founders however, judging by the rumours of 48gb and such, that will probably take a beefy cooler.
My Aorus Xtreme 2080ti is 2.75 slot thus I might have to go 3 slot to be on the safe side.
But if u strictly think 30xx series, uncertainty regarding the specs would indicate to sit and wait until Nvidia confirms it.
My Aorus Xtreme 2080ti is 2.75 slot thus I might have to go 3 slot to be on the safe side.
But if u strictly think 30xx series, uncertainty regarding the specs would indicate to sit and wait until Nvidia confirms it.
I highly doubt NVIDIA's reference GPUs will be a 3-slot design. Also, once you are doing watercooling, who cares what the stock cooler width is? As long as the PCIe Bracket is 2 slots, your waterblock will almost always be a single-slot or 1.5-slot design.
Reference is going to be a 2 slot design. I would love to see the io in one slot, like the good old 1080ti, but that wont happen.
As other people said, once watercooled, except stupid 3 slot 2080ti custom pcb, the card would be 2 slot.
Save your money, get the founders edition, stick a waterblock. The ones that come from nvidia clock quite high always, as well as the titan rtx, but you can push their bioses to 375W, while the titan can't, sadly.
Mine would be happy with an extra 50W for stability.
As other people said, once watercooled, except stupid 3 slot 2080ti custom pcb, the card would be 2 slot.
Save your money, get the founders edition, stick a waterblock. The ones that come from nvidia clock quite high always, as well as the titan rtx, but you can push their bioses to 375W, while the titan can't, sadly.
Mine would be happy with an extra 50W for stability.
Now, Im trying out the glued one to see how it looks. Its not fixed yet, but some feets are on the way from China. Rounded 10mm height ones.
You could, if you drill 4 small holes into the bottom plate. Its not a big deal. I just want to test the glued ones, because I wanted the top/bottom plates look identical without holes.
From tonight, you can Preorder the product in the webpage! The shipping prices, are changed a bit (2-4euros) but not much.
The preorder ends in the next weekend. From the date of your order you have 14 days to decline the order and get full refund.
The preorder ends in the next weekend. From the date of your order you have 14 days to decline the order and get full refund.
Everybody need to order from the Site, because this is the only payment method. Via credit card. ?
I'm finding it really hard to make a choice about the color. The recent picture of the different surface treatments didn't show the colors very well and the pictures on the website are renderings I assume? Could you show us the different colors in good light?
The color samples at the my manufacturer right now and they have other works first, but I cant wait to show it
This is a stupid question most likely but I want to make sure I cover all avenues. If I opt for the dual extra large distro and back, and a separate small front and back, Will I be able to close/expand top and bottom parts to fit snug or they differ in size length on the side? As I said, sounds stupid but just making sure.
