case

  1. S

    AIR cooled, Wall Mounted, behind LG C9 OLED TV, Nvidia GPU R5-3600cpu build questions

    Hi SFF Folks, New here, because I spoiled myself with a 65" LG C9 OLED, for my 50th Birthday, which recently achieved G-Sync Compatible status. The TV is wall mounted with power and Ethernet all neatly behind and out of sight. I'd like to build a Ryzen 5 3600 Nvidia 2080 super, SFF build I...
  2. D

    3D printed, small form factor, computer case

    Fully 3D printed, small form factor, computer case. This was built using hardware that was a few years old mainly as a proof of concept. This was designed to replace another HTPC I had in the entertainment center. The processor is an i5 4440. The video card is a GTX 750ti. There is an SSD and...
  3. B

    ZS-A4 Package A or B?

    I am looking into buying an ZS-A4 of Taobao. There is only one buying option at the moment Package A but before there was a Package B as well. Does anyone know the difference between them and if they own a ZS-A4 to share opinion about the case?
  4. S

    Concept NEW CASE! Is there any interest in an SFF case capable of holding 2x 280mm radiators?

    Just as the title says: is there any interest in a case roughly the volume of the Ncase M1, but capable of holding two 30mm thick 280mm radiators? I am in the (early) process of creating such a case for myself; but since I'll be doing the work of creating the case anyway, I wanted to gauge...
  5. D

    Cases for onboard graphics

    Hi all mentioned this before, but didn't get great responses so trying again. Looking for a PC case for itx but with decent cooling a must. in essence I'm looking for a case that is small but provides lots of cooling as the area usually dedicated to fit a large graphics card is instead used...
  6. K

    Closed Ncase M1 V5

    I have been waiting for a V6 for some time now, and it seems like it isn't going to be ready till September, (Necere said late July early August at best) I want to build my PC 7/7 with a new 3900x, and am not looking to have my pc parts sitting on the table for another 2 months.. I would like...
  7. cirrus7

    Prototyping cirrus7 incus - fanless case for ASRock DeskMini A300 and other popular STX sized boards.

    Introduction: We have been working on a passivly cooled STX design lately. This form factor has gained quite some interest since ASRock has launched its DeskMini A300. The DeskMini A300 is a nice SFF Barebone system based on the AMD Ryzen CPUs with a powerful Vega 11 GPU integrated. The idea...
  8. T

    Realan H-E80S or Streacom F1C Evo

    I think both of these cases but the only thing I am concerned with is someone said that the power button felt cheap on the F1C evo and I curious on how solid the lid feels since it seems on both of them they are clipped on. (I preferred the Realan H80 where you screwed on the top lid) If you...
  9. Hommer Cases

    Prototyping Hommer Case V1 How SFX Case should be (8.4l incl. AIO and 3slot GPU)

    Hello everyone, I am Simon and I am a mechanical engineer from Germany. I've been building some "Mini PC's" lately, but I wasn't really pleased with it. The cases that I have seen and / or installed were either too big for me or you could only sheet a 2 slot GPU or no AIO ... For this reason, I...
  10. CC Ricers

    Concept Customizable Mini STX case

    The A300 DeskMini has just been released and I have been thinking about this for some time, but now I think it's a good time to discuss my next case concept which will be designed around mini STX boards, especially for APU builds. At a volume of 1.8 liters, this case will fit mini STX boards...
  11. L

    Smallest case fitting i7 8700k OC

    Good morning, I have been lurking these forums for a while now and finally decided to make an account to get some advise on a build I have been wanting to do for quite some time. I'm looking to build a portable (as in easily transportable by bike) powerhouse that supports an overclocked i7...
  12. E

    [HELP] MSI 2080 Gaming X Trio

    Hi guys, I recently came into possession of a pre-built PC. It came with a unbranded ATX case and I'm looking to downsize into SFF if possible. However, I've taken a look around pcpartpicker and having done some research, it seems that there are not many Build threads with the MSI 2080 Gaming...
  13. UnnoTed

    Concept Expandable itx case idea

    Recently i have been looking at the K39 itx case 3.98L and the only thing that it seems to lack (IMO) is a bit of space for fans, hard drives and optionally a bigger gpu, about nearly 3 years ago i suggested a expandable itx case to corsair but haven't heard anything about it since... (...
  14. Xyit

    Closed NFC s4 Mini with walnut bezel, power button, and riser. GTX 770

    I have an unused S4 Mini with all the add ons in mint condition, my plans changed and i'm now unable to use it. Also have a left over EVGA gtx770 SC 2gb from a previous build im trying to sell. S4 Mini with Add ons: 250$ GTX 770: 85$ Would be willing to trade for a Ncase M1 as well. I could...
  15. Thehack

    Stalled Project Stealth - 5.7L, custom 400W PSU, 270mm GPU

    After project Pure I am working on my next case to address some of the needs/wants of the community in builds. The layout has the gpu and cpu fans on the same side. The goal of this case is reliably power a 400W of components in the smallest size possible. CPU Cooler: 40mm, Noctua NH-L9i GPU...
  16. Thehack

    Production J-HACK PURE X - 4.3L LP GPU chassis with FLEX support

    Hello, Following the release of the J-HACK PURE, I am currently working on the PURE XL. A large version that supports LP GPUs and FLEX ATX PSU. It is not the smallest LP case, but it is designed to be more flexible and built for people who require a lil' bit more CPU processing power. Specs...
  17. S

    Concept SFF Tower case gaming PC

    Hey guys! I want to share with you my idea. Maybe here it will be interesting to someone. A little background. I started to monitor different startups, starting with N-CASE, then DAN CASES a4-sfx, NFC S4 MINI, DR ZABER CENTRY. These are very cool projects and they are unique each in its own...
  18. S

    Concept Nano V1 - <9L, SFX, 126mm CPU space, 263mm GPU

    Hey Sff-Freaks, I am pretty new to the SFF scene with my Node202 build from this summer. But sadly the GPU temps and CPU fan noise weren't that great and thought about a better way to layout the components. Used it as an excuse to drain my hours in Sketchup and measured with that Box: By...
  19. VELKASE Michael

    Prototyping Velka 1: The smallest APU case

    The purpose of this case is to be the smallest case that can fit a standard Mini ITX motherboard, 65 W TDP CPU cooler such as the Noctua NH-L9a/i, and DC-DC power supply such as the Pico PSU. Top priorities: Size Appearance The case will look best when set flat as shown in the first picture...