Production FormD T1 Classic (READ FIRST POST)

[Navic]

I like the minimalist style. The reset button is redundant for me, but I will consider your plan. After all, this is more reasonable.

W360 did say he was going to make a cover piece for the holes in the side panel. Won't be as clean as a solid front panel, but it will still be cleaner than having holes in the side, if that's not what you want.

 

[persef0na]

I'm sorry if you guys mentioned that somewhere already, but will the unibody version of the 1.5 also have the front USB-C and power button?

 

[Wahaha360]

I'm sorry if you guys mentioned that somewhere already, but will the unibody version of the 1.5 also have the front USB-C and power button?

Both Unibody and Two Tone T1 V1.5 will have USB-C + Power Button *cutout.

 

[Daemos]

For v1.5 in the reference layout. What is the largest GPU that can be installed?

 

[DrHudacris]

For v1.5 in the reference layout. What is the largest GPU that can be installed?

Just reference height cards (hence the name)

 

[PKAWA]

For once I meet the height requirements

 

[EndingCredits]

A lifetime of not being allowed on rollercoasters?

 

[Daemos]

Just reference height cards (hence the name)

darn it's very hard to get referenced sized GPUs in Australia. I was hoping it would support 2.5 to 2.7 slot GPUs.

 

[Wahaha360]

darn it's very hard to get referenced sized GPUs in Australia. I was hoping it would support 2.5 to 2.7 slot GPUs.

It’s hard to get two slot GPU anywhere these days due to the size advantage for mining.

On another note, ref GPU in <10L *without riser is already pushing it to the extreme, anything bigger is not possible volume wise - and we don’t like volume increase.

 

[guniens]

Hi @Wahaha360

Can I ask you how much would be the shipping to Italy for T1 1.5?
I saw that you listed DE in available locations, does that mean it would be possible to buy it on CaseKing?

Thanks in advance!

 

[PKAWA]

There's only one place you will be able to buy the case and that's via formdworks. Germany is referenced as country they are shipping to. Nothing more.

 

[Kri]

Have any of the beta v1.5s been shipped? I feel like late September is awfully short if you still need to ship, give time for review, receive feedback and adapt the design. From my point of view, it will be at least November before people can order. I hope I'm wrong.

 

[Kri]

Have any of the beta v1.5s been shipped? I feel like late September is awfully short if you still need to ship, give time for review, receive feedback and adapt the design. From my point of view, it will be at least November before people can order. I hope I'm wrong.

 

[DrHudacris]

Have any of the beta v1.5s been shipped? I feel like late September is awfully short if you still need to ship, give time for review, receive feedback and adapt the design. From my point of view, it will be at least November before people can order. I hope I'm wrong.

As far as I know, no testers have received cases. So overall, a small delay to the overall timeline.

But get hyped! Pretty sure this means an even better product!

 

[Deleted member 25357]

As far as I know, no testers have received cases. So overall, a small delay to the overall timeline.

But get hyped! Pretty sure this means an even better product!

Yeah... Hope so

 

[Wahaha360]

Have any of the beta v1.5s been shipped? I feel like late September is awfully short if you still need to ship, give time for review, receive feedback and adapt the design. From my point of view, it will be at least November before people can order. I hope I'm wrong.

As far as I know, no testers have received cases. So overall, a small delay to the overall timeline.

But get hyped! Pretty sure this means an even better product!

Yeah... Hope so

Late indeed, making more last minute changes

Tweaking T1 - Reference now. Testing 5950X on ROG X570-C8I with 3080FE, NO RISER needed.

Also tweaking on clearance for C14S on Gigabyte X570 / B550 ITX mobo now.

 

[Stinkybear]

Top/Left DP looks close to the case. I know I didn't use that one on v1.1 because the cable wouldn't fit in that port, obstructed by the case. Less of an issue because the next ones worked fine.

 

[SoSquidTaste]

Late indeed, making more last minute changes

Tweaking T1 - Reference now. Testing 5950X on ROG X570-C8I with 3080FE, NO RISER needed.

Also tweaking on clearance for C14S on Gigabyte X570 / B550 ITX mobo now.

@Wahaha360: any possibility for selling raw aluminum units of v1.5? A) that looks dope as it is, and B) for Cerakote freaks like me we would need to strip it down to the bare aluminum anyhow

It would be another SKU to track though, so I get it if that's a no-go. But it sure would be something!

 

[Wahaha360]

Top/Left DP looks close to the case. I know I didn't use that one on v1.1 because the cable wouldn't fit in that port, obstructed by the case. Less of an issue because the next ones worked fine.

Tested on FE and the cutout is fine.

 

[Wahaha360]

@Wahaha360: any possibility for selling raw aluminum units of v1.5? A) that looks dope as it is, and B) for Cerakote freaks like me we would need to strip it down to the bare aluminum anyhow

It would be another SKU to track though, so I get it if that's a no-go. But it sure would be something!

Too easy to scratch the surface without anodizing or paint to protect it.

Don't want to deal with extra SKU tracking and damages during packaging / logistics.