DAN A4-SFX v4.1

[tinyitx]

How in the world do v3 owners get the power cable to work with a corsair powersupply? The plug is in the wrong orientation - and i can’t approach from the other direction because the plug won’t fit through the gap. Any suggestions?

You cannot follow what is done in post #1263?

 

[PeGys]

How in the world do v3 owners get the power cable to work with a corsair powersupply? The plug is in the wrong orientation - and i can’t approach from the other direction because the plug won’t fit through the gap. Any suggestions?

It does fit. Or you just unscrew the PSU bracket and you can run the cable correctly.

By shamelesly using the picture of a fellow DAN user, I can show you this:

I think everyone with a Corsair SF-series PSU did this

You can unscrew the 6 PSU bracket screws, lower the PSU for a second, run the cable, screw the bracket back in. Simple as that.

The advantage with the DAN A4 is the possibility to completely dismantle it by unscrewing it.

 

[dondan]

 

[fabio]

Well, again, I've changed! This configuration support full-length reference GPU! It wasn't necessary to change the fan as well, but, why not? I want to try the thinner rad+fan config to see how it performs! And everything is very easy to swap.
And there was space for a T-connector to fill "easily" the system!

(Maybe the GPU in the loop will be possible as well??)

I'll post soon temps under stress! (But also here, with the ASUS Z390 ITX. the VRM reach the maximum. The initial option was to use the ASrock Z390, but I don't know why, the MB doesn't turn on with the G-Unique. Is the only brand. I've tried the previous Z370 ITX as well, and nothing. Maybe is some safe option in the BIOS??

 

[dondan]

I think you need a mono block to cool the VRM with water

 

[fabio]

I think you need a mono block to cool the VRM with water

Indeed! But I don’t know if exist for any Z390 ITX MB...

 

[fabio]

Here the results!

Not so bad! But again, for me, all this at the end is not bringing much more than the EIsbaer LT combo. So I'll stay with it, waiting for a full monoblock to justify a custom loop! But now I know that there is space!

BTW, the best setup for me is this last one, keeping the slim fan and using the HW LS rad instead of the TX. The DDC will still fit!

BTW:

9900K no power limit, 5ghz OC, AVX -3
RAM OC 3733MHz C17
Fan curve, standard
Pump curve, standard
Chassis fan, silent.

Time Spy


AIDA64


Blender 25min render


Prime95 29.5 build 6

 

[rfarmer]

Indeed! But I don’t know if exist for any Z390 ITX MB...

Found this post on EK's Facebook page, looks like they are at least considering it.

 

[fabio]

Found this post on EK's Facebook page, looks like they are at least considering it.

Ahahaha, just looked at it and wrote, "YES" one hour ago. Thanks man!

 

[SkyhookJr]

Thanks for the help everyone. The manual was a bit misleading. I’m not used to taking things apart to fit things in a case - my kids could hide inside my previous builds.

 

[SkyhookJr]

Another puzzle: My strix 1060 is too wide to clear the location of the riser to seat it. Do you unscrew the riser, plug in the graphics card, secure the card in the case and then rescrew in the riser?

 

[Dawelio]

Yes, that is what I had to do with my previous EVGA 1080 Ti FTW3 card in order to get it installed in the case.

 

[Tr15]

Hi,
Does anyone know of any examples in the wild of a Dan Case v3 fitted out with:
An SFX power supply, a 120mm AIO cooler, and slim fan (with an itx length graphics card)??
I'm keen to try it but would like to see an example build first. Which orientation does each component go in for the best thermal results? Is it even possible?
Thanks!

 

[fabio]

Hi,
Does anyone know of any examples in the wild of a Dan Case v3 fitted out with:
An SFX power supply, a 120mm AIO cooler, and slim fan (with an itx length graphics card)??
I'm keen to try it but would like to see an example build first. Which orientation does each component go in for the best thermal results? Is it even possible?
Thanks!

There is this!

 

[dondan]

Some pictures of the A4-SFXv4

Regards
Daniel

 

[fabio]

Some pictures of the A4-SFXv4

Regards
Daniel

LOVE IT!!

 

[advblue]

Awesome. Cant wait for it to appear on Case King.

Does anyone have silver case with black sides or maybe like smoked / darker glass sides? Wondering how that looks.

 

[D10S]

Hi,
Does anyone know of any examples in the wild of a Dan Case v3 fitted out with:
An SFX power supply, a 120mm AIO cooler, and slim fan (with an itx length graphics card)??
I'm keen to try it but would like to see an example build first. Which orientation does each component go in for the best thermal results? Is it even possible?
Thanks!

Hope this could help: D10S

 

[jas0nt]

V4 looks great. Any estimation re release dates?

 

[PeGys]

Is it me or is the PSU mounted higher leaving more room for the asetek AIO ?