Ahah, great news for power cable!!
The positive pressure is more than enough, an exhaust fan for this setup will do almost nothing.
It should arrive at the same time as my cerberus-x..
Chimera Industries Cerberus: The 18L, mATX, USA-made enclosure
- Thread starter PlayfulPhoenix
- Start date
It should arrive at the same time as my cerberus-x..
I just realised, is that a hot pixel in the photo? (the three red pixels on the cable nearest to your hand)
I'm guessing it's someone at Sliger, since @Aibohphobia is in Asia at the moment
I'm guessing it's someone at Sliger, since @Aibohphobia is in Asia at the moment
Aha, so that's why he has them at hand - they haven't even left Asia yet!
Hello, everyone! I'm new to these forums (though I am somewhat aware of the "Cerberus"). I am looking into building my first pc and "Cerberus" caught my attention. I'm a bit confused though, and was wondering if somebody could help bring me up to speed. I very well may be miss-understanding some things, so some clarification would be appreciated.
1. There are/were 3 "versions" available so far, at some point? (also, for brevity, I'm just listing some basic info about each one for identification purposes):
A. Nova-00 <- I know nothing about, but seems to be long gone. (don't know if it was ever actually for sale, or if it was just more-or-less a design prototype)
B. Cerberus <- A microATX-sized pc case (room for 2 relatively full sized graphics cards and whatnot, also seems to be more info available about this one.
C. Cerberus-X <- A standard ATX-sized version of the Cerberus? (That's about all I know about this one...)
2. They are/were all pre-production prototypes? (huh??)
3. None of them are available to anyone who hasn't already put money down on one? (likely no spare stock?)
4. Does/did the Cerberus (microATX version) have enough side clearance in the case for the litte hump on the edge of full coverage graphics card water blocks, where the inlet/outlet lines connect? (like the kind from EKWaterBlocks)
5. Will the Cerberus (microATX version) ever be available again for purchase to those who came late to the party?
6. Will there be a "next version" or a "final version" available to purchase? (preferably sized like the microATX Cerberus)
Thank you very much in advance for putting up with this long post. I hope someone can answer my questions. I'll shut up for now and quit bothering everyone.
I'm new to these forums (though I am somewhat aware of the "Cerberus"). I am looking into building my first pc and "Cerberus" caught my attention. I'm a bit confused though, and was wondering if somebody could help bring me up to speed. I very well may be miss-understanding some things, so some clarification would be appreciated.1. There are/were 3 "versions" available so far, at some point? (also, for brevity, I'm just listing some basic info about each one for identification purposes):
A. Nova-00 <- I know nothing about, but seems to be long gone. (don't know if it was ever actually for sale, or if it was just more-or-less a design prototype)
B. Cerberus <- A microATX-sized pc case (room for 2 relatively full sized graphics cards and whatnot, also seems to be more info available about this one.
C. Cerberus-X <- A standard ATX-sized version of the Cerberus? (That's about all I know about this one...)
2. They are/were all pre-production prototypes? (huh??)
3. None of them are available to anyone who hasn't already put money down on one? (likely no spare stock?)
4. Does/did the Cerberus (microATX version) have enough side clearance in the case for the litte hump on the edge of full coverage graphics card water blocks, where the inlet/outlet lines connect? (like the kind from EKWaterBlocks)
5. Will the Cerberus (microATX version) ever be available again for purchase to those who came late to the party?
6. Will there be a "next version" or a "final version" available to purchase? (preferably sized like the microATX Cerberus)
Thank you very much in advance for putting up with this long post. I hope someone can answer my questions. I'll shut up for now and quit bothering everyone.
Well, one of the packages arrived safely. Not sure why the other three didn't show up at the same time
It should arrive at the same time as my cerberus-x..
Maybe, at this point we're considering just waiting and sending the corrected panels, USB 3.0 cables, and power cable all together.
Looks like I accidentally the pencil tool while cropping the picture.
Hello, everyone!
Welcome to the forum!
Nova-00 is the original glossy blue prototype. There was only 1 made and it's been sold.
The name changed because a few other cases named Nova were released during development of this newer design. This is the standard version.
A taller 8-slot variant that fits ATX motherboards. Pretty much identical otherwise.
There were prototypes of Cerberus, which are what's in almost all of my pictures. There was also a short pre-production run recently.
Not all of the pre-production Cerberus are spoken for, but I've quite a waiting list to still go through.
That really depends on the height of the card. For reference-height cards it shouldn't be an issue with more compact terminals. But it really just depends on the specific parts.
There will be a general production run, but no ETA yet.
No 8 slots as far as i remember. Cerberus-x is 61mm taller than cerberus, seems in line with 8 slots vs 5 on standard 5 slots of cerberus
It's 8 slots to maintain the same bottom rad/fan/whatever compatibility as regular Cerberus.
so the general production run has an unknown ETA, but how many units per production run would it have to be to make it worth it. Being late to the party I did see the kickstarter was about 1/3 funded or so I thought. So I'm just wondering from a business standpoint what the magic number would be?
No minimum number on our production, if you want one you'll get one - always in stock, no wait dates.
*At the drive through*
Yeah, I'll have two beige Cerberus, a beige Cerberus-X, a red Cerberus with ATX bracket, a green Cerberus, two blue Cerberus, one with ATX bracket and a large window.
I want the Cerberus... How can I get one... I joined the forum to get one... Im in UAE Abu Dhabi.
Similar threads
