Production case SX1 6.8L / SX2 7.5L by Custom_MOD

[Megaden44]

how do i delete posts

 

[bowman9991]

Have Batch 4 cases shipped yet?

 

[sergiiua]

in August there were a lot of orders. it seems we did not calculate our strength. pariah 4 will start sending next week.

 

[Megaden44]

Just finished building the case. I will try to address problems that other people had and my experience with them. I had no problem inserting all of the psu screws. At one point one of the little rubber feet came off just glued it back on no problem. The motherboard standoff were seemingly not aligned properly, I only put in one of the screws and the mother board seems completely secure so I don't mind. I could have gotten in 3 of the 4 standoffs if i tried but i don't think it really matters because I will not be moving this case around. My 980 strix did not fit in the case but this is not Sergiiua's fault, i suspected it would not work. Overall this case was a challenge to build in, but i had fun and I am happy with the result.

 

[bowman9991]

Did the cat in the last picture come with the case? Was there an option on the form that I missed? :-)

Just finished building the case. I will try to address problems that other people had and my experience with them. I had no problem inserting all of the psu screws. At one point one of the little rubber feet came off just glued it back on no problem. The motherboard standoff were seemingly not aligned properly, I only put in one of the screws and the mother board seems completely secure so I don't mind. I could have gotten in 3 of the 4 standoffs if i tried but i don't think it really matters because I will not be moving this case around. My 980 strix did not fit in the case but this is not Sergiiua's fault, i suspected it would not work. Overall this case was a challenge to build in, but i had fun and I am happy with the result.

 

[sergiiua]

Just finished building the case. I will try to address problems that other people had and my experience with them. I had no problem inserting all of the psu screws. At one point one of the little rubber feet came off just glued it back on no problem. The motherboard standoff were seemingly not aligned properly, I only put in one of the screws and the mother board seems completely secure so I don't mind. I could have gotten in 3 of the 4 standoffs if i tried but i don't think it really matters because I will not be moving this case around. My 980 strix did not fit in the case but this is not Sergiiua's fault, i suspected it would not work. Overall this case was a challenge to build in, but i had fun and I am happy with the result.

thanks for your feedback. this can help us.

 

[Ubermarshall]

Hey @sergiiua

i really think your revision 4 case sets itself with its 280mm aio compatibility.
When are you expecting to ship them?

 

[Megaden44]

Did the cat in the last picture come with the case? Was there an option on the form that I missed? :-)

Unfortunately no, the box she's in does come with the case though

 

[Megaden44]

Once enough people own this case it would be good to have a GPU compatibility spreadsheet so people can know if their card works. A google spreadsheet would work

 

[rudy44]

Just finished building the case. I will try to address problems that other people had and my experience with them. I had no problem inserting all of the psu screws. At one point one of the little rubber feet came off just glued it back on no problem. The motherboard standoff were seemingly not aligned properly, I only put in one of the screws and the mother board seems completely secure so I don't mind. I could have gotten in 3 of the 4 standoffs if i tried but i don't think it really matters because I will not be moving this case around. My 980 strix did not fit in the case but this is not Sergiiua's fault, i suspected it would not work. Overall this case was a challenge to build in, but i had fun and I am happy with the result.

so what GPU did you end up using? And which version of the case is this?

 

[bowman9991]

If people who have built a system using a case could list their installed GPUs in this thread (and case versions) that would be a start!

Sergillua, if you have a list of GPUs you have already tested in particular cases (and confirmed to fit) that would also be good.

Looking forward to the case, with or without the cat

Once enough people own this case it would be good to have a GPU compatibility spreadsheet so people can know if their card works. A google spreadsheet would work

 

[Megaden44]

I made a spreadsheet but it doesn't seem to let me link it even though its in the list of allowed embeded links:

 

[DazeHero]

I made a spreadsheet but it doesn't seem to let me link it even though its in the list of allowed embeded links:

Did you make the spreadsheet view able to the public? Just getting a shareable link shouldn't work for embedding

 

[Megaden44]

Did you make the spreadsheet view able to the public? Just getting a shareable link shouldn't work for embedding

Yup, it says public on the web any one on the web can find and access it ttps://docs.google.com/spreadsheets/d/1Jvf49JYOuzRH6oWpk-mJ2GZrj4Yv_b0_-ASJXvr_4CY/edit?usp=sharing just add an h to the begining

 

[rudy44]

Hey @sergiiua , I noticed the 6.37l case is now in version 2.2. What is the difference from version 2.1?

Will batch 6 be version 2.2? Thanks!

 

[grantman102002]

Got any pics of batch 4? I want to see my baby!

 

[sergiiua]

Hey @sergiiua , I noticed the 6.37l case is now in version 2.2. What is the difference from version 2.1?

Will batch 6 be version 2.2? Thanks!

Yes, Party 6 will receive revision 2.2. The changes are minor. we will remove some screws from the top cover. While we solve some problems. but we believe in success!

 

[BozoSilvia]

Hurray for batch 6!

 

[Ficker69]

is batch 5 up to date ? will it be availbe on time

 

[bowman9991]

I'm in Batch 4, which hasn't shipped yet (as far as I know) so it's unlikely they'd be able to ship Batch 5 by 30 September as suggested in their timeline. Just my guess anyway. It is difficult to wait! :-)

is batch 5 up to date ? will it be availbe on time