Hi all,
I‘m working on the basics of a 12V project - details coming soon- and it needs a LOT of power, around the 550w mark to be precise:
I have a 210x54x40mm volume available for the PSU.
So far I came up with two possible solutions:
1) Two 2x4” Cosel Cosma GMA 300F with a compact load balancer of sorts (I know a forum member is developing one with matching specs, but afaik there is nothing off-the-shelf out there as of yet - correct?)
2) using a MuRata D1U54P-W-650-12-HBxC (thanks @NinoPecorino) and modding it to size - it’s near-ideal with a decent power overhead (it delivers 650w), but 20mm too long; problem is that the pcb appears to be covering the entire length of the footprint so this might be a rather adventurous and possibly unfeasible undertaking - and I will need to deal with a power bus that really wants to talk to a server backplane...
Switching is nice-to-have but optional at this stage, really
Anyone knowing of a (better) way of doing this?
Thanks in advance!
I‘m working on the basics of a 12V project - details coming soon- and it needs a LOT of power, around the 550w mark to be precise:
I have a 210x54x40mm volume available for the PSU.
So far I came up with two possible solutions:
1) Two 2x4” Cosel Cosma GMA 300F with a compact load balancer of sorts (I know a forum member is developing one with matching specs, but afaik there is nothing off-the-shelf out there as of yet - correct?)
2) using a MuRata D1U54P-W-650-12-HBxC (thanks @NinoPecorino) and modding it to size - it’s near-ideal with a decent power overhead (it delivers 650w), but 20mm too long; problem is that the pcb appears to be covering the entire length of the footprint so this might be a rather adventurous and possibly unfeasible undertaking - and I will need to deal with a power bus that really wants to talk to a server backplane...
Switching is nice-to-have but optional at this stage, really
Anyone knowing of a (better) way of doing this?
Thanks in advance!