ncase m1

I am planning on building in a Ryzen 3000 system in the NCase M1. My target achieving silent operation with high performance by mounting a 240mm below the GPU and another 240mm on the AiO bracket all connected with soft tubing. I would like to use quick disconnects to be able to take out the GPU...

I was planning on doing a build in the Ncase M1 and wanted to do a custom water loop following what Ive seen on this forum. I recently saw the computex ITX boards and was interested in the Impact MDTX board. I know it will fit in the M1 but I was wondering if it would still have clearance at the...

Hello I'm new to this forum and I'm interested in getting the ncase m1! I was wondering what is the best air cooler for the m1 with using the hdd on the bracket. I'm going to be moving 2 of my hdd to the bracket. I'm also hoping the hdd bracket is still available for the next version as I see...

I'd appreciate if someone could tell me the following measures of the M1's tubing pass-throughs at the back, as these specs are quite difficult to find. What is the diameter of the pass-throughs without the rubber grommet? What is the distance between the pass-throughs, center to center? I'm...

Hello! Has anyone tried to swap out a AIO Cooler head pump with tubes, from a bigger radiator to a 92 mm Alphacool Radiator, to fit in one of your systems? Or do I have to learn everything I can about "Custom watercooling" and spend hundreds of $? I'm using a Ncase M1 Specs: Ncase M1...

Hi folks, not sure if this is the best place to ask but I've got my ncase M1 on order (SO FRIGGING EXCITED TO BIN THE TT CORE V1!) and I want to put my Radeon VII in it. I know that the GPU fits but the other issue is the noise that thing makes. Does anyone know if the morpheus ii core will fit...

Hey there, Long time lurker here. I finally pulled the trigger on an M1 and a new build. It’s going to be an air cooled Ryzen build with a Radeon VII. Should be an interesting build/balance between high powered hardware and acceptable temps/noise/size. Posting because any more builds/resources...

Moving to a new case, I sell my Ncase M1 V5 in nice condition, with no scratches on panels, for 190 euros. In addition, I can include some other stuffs for Ncase: -Top hat (for 2x 120x15mm fans) (25euros) -3x 120x15 NF Noctua fans (15 euros per fan) -1x 92x15mm Noctua Fan (15 euros) -1x NH-U9S...

Hi, I'm looking at building my first PC and was wondering if I could have some input on this configuration: NCASE M1 V5 Black & Vented Aluminium Panel i7-9700k Gigabyte Windforce 2080 Ti ASRock Z390M-ITX/ac Mini ITX LGA1151 Motherboard Corsair Vengeance LPX 32GB (2x16GB) DDR4 3200MHz RAM NZXT...

@ASRock System - Please hang tight for a minute, read over the speculation(s), I will circle back around to why I mentioned you...! So, a little speculation on what we may see coming in the next year from AMD...! Obviously, the above is a roundup of some recent AMD rumors... Whether or not...

2020-09-15 : revision 9

Hi everyone, I'm about to build my first SFF PC, and wanted some feedback on cooling, particularly for the CPU. For the case, I'm deciding between the Dan A4, NCase M1, and Louqe Ghost S1 (without a top hat). For the CPU, I want either the 9700k or 9900k, but am not sure how well the cooling...

Hey there. This is my first SFF build, and I'm looking to build something small enough to take either as a carry on, or in a checked bag for my flight in December. This card is giving me trouble, as I thought I had a build planned out completely in the Ncase M1, but then I found out the card...

@MTMeow has been providing us some leaks with this potential new tower. It seems like a good contender to unseat the Noctua U9S/D9L as the top tower coolers for the NCase M1. I just thought I would condense the info and give it a focused thread rather than being in the Dan-A4's heatsink thread...

Hello, everybody. One day ago, I contacted the friendly person behind u/NCASEdesign regarding the laser engraved logo on the front panel of the Ncase M1 asking if there were plans to sell it without that logo. The conversation went on briefly and he told me somewhere along the lines that for it...

It would seem the top panel that enables use of a ODD has been discontinued and is missing on the NCASE parts list. I was wondering when it will be available again as the reason I'm ordering the M1 is because of how much you can fit in this brilliant case!

Hi, while I'm collecting my thoughts on what my next case will be I wanted to mod/have some fun with my current Ncase M1 ... particularly with the snap on side panels. I was wondering if any of you guys have done such atrocity as to have your side panels modified? I'm talking about filling up...

Hi everyone. I am currently in the process of a new build. I already acquired my GPU (ASUS RTX 2080Ti Dual OC), pre-ordered my CPU (intel i9 9900k) and was planning to build it into a really compact case with decent enough cooling for some overclocking. I also have a samsung 970 pro for my...

Hey apologies for the simplest of questions: Would this card fit inside the Ncase? 26.8cm x 11.4cm x 5.8cm https://www.asus.com/uk/Graphics-Cards/DUAL-RTX2080TI-O11G/ It looks like its over 2.5 slot, probably 2.75 but cannot be sure. Trying to work out this is like solving a riddle for me :(...

Let me first say how much I love my NCase M1. Yes, you can get smaller with Dan's A4 case, which is a wonderful invention. But the M1 is the smallest you can go without - in my opinion - either compromising cooling and or noise levels, or being forced to use a very short GPU card, to install...