Other What's on Taobao

[lys1030]

Anyone know of a way to contact the seller of Acat x2 outside of taobao/aliwangwang? My account got locked the moment I tried to send a message on there. I ordered the case using superbuy last October and the case still hasn't shipped. The seller gives my agent a date, the date passes, then the seller delays to a later date, probably over 20 times now. I'd like to contact the seller directly if possible as my superbuy agent doesn't seem follow my requests very well.

My acat x2 with hats was shipped just yesterday after I wait for more than half a year. Could you maybe check again? If not, I can probably help you (I still talk to the seller on aliwangwang, and he is usually slow to respond).

 

[tinyitx]

Anyone know of a way to contact the seller of Acat x2 outside of taobao/aliwangwang? My account got locked the moment I tried to send a message on there. I ordered the case using superbuy last October and the case still hasn't shipped. The seller gives my agent a date, the date passes, then the seller delays to a later date, probably over 20 times now. I'd like to contact the seller directly if possible as my superbuy agent doesn't seem follow my requests very well.

This member appears to be related to Acat. But he was last seen on July last year. So, he does not seem to be active.

AcatFormula

smallformfactor.net

 

[tinyitx]

My Deng F12 purchase didn’t go through, seems like the Deng studio people are afk...

I’m thus looking for alternatives with that high end end cnc look to it.

Any good ideas? Not a fan of cases that use riser cables.

See if Captain S V1.2 meets your requirement or not?

Captain S v1船長全鋁定製miniITX小主機殼支持ATX電源-Taobao

歡迎來到淘寶船長主機殼，選購Captain S v1船長全鋁定製miniITX小主機殼支持ATX電源，該商品累計熱賣3件，好評率100%，38用戶購後寫下真實評論。顏色分類：3位硬碟邊條（一對）,側面透明玻璃升級爲鋁合金板,側面透明升級爲多層鍍膜鋼化玻璃,V1.2銀色一側鋁一側透明鋼化玻璃,機體改黑色,V1.2第二硬碟支架,ATX改SFX電源支架,開關改紅色,2位硬碟邊條（一對）,側面透明升級爲灰黑色鋼化玻璃，快來查看更多買家秀和測評，讓你放心淘到寶！

world.taobao.com

 

[R3venger]

I just found this pio motherbord with flat connectors

天貓淘寶海外，花更少，買到寶！

天貓淘寶海外作爲面向華人的跨境電商平台，覆蓋200多個國家和地區的消費者，其中核心站點包括：中國香港、中國澳門、中國台灣、新加坡、馬來西亞、澳洲、加拿大。

m.intl.taobao.com

 

[Bakaban]

Some interesting new small cases appeared on taobao:

5.7 liter COOJ MQ5

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

6.9 liter COOJ MQ6

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

Seems to use a FLEX psu, but going by the form, it looks like there should be room in the MQ6 to fit an HD Plex 400 watt combo comfortably.

 

[hereforthefeast]

@Bakaban those are some nice looking cases, the one piece design is quite nice. However one concern is that the flex psu is intaking from inside the case and doesn't get to draw in fresh air.

 

[rfarmer]

@Bakaban those are some nice looking cases, the one piece design is quite nice. However one concern is that the flex psu is intaking from inside the case and doesn't get to draw in fresh air.

It is intaking air through the bottom of the case. You can see the modular connections at the top which means the intake fan is at the bottom.

 

[prayogahs]

Having the flex psu in front of the case is so weird tho. One of the few SFF cases I have seen that does that.

Btw, this is from the same designer that posted the 14L unibody case here previously.

Production - Z13 14.6L One-piece molded aluminum housing Powerful compatibility

2022/12/10 First of all, We need to apologize. In the last year, we had a big problem with our production. Because the design was very difficult to produce, the yield rate was very low, about 20%, and most of the goods were scrapped, which caused us to have some orders not delivered on time at...

smallformfactor.net

Now that Z13 case is also available in taobao for deposit and pre-order for 1499 RMB

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

 

[Mojo_Jojo]

It is intaking air through the bottom of the case. You can see the modular connections at the top which means the intake fan is at the bottom.

Isn't it an exhaust fan tho? The top fan is also pulling air into the case.
The case reminds me a lot of the circle pro, which was wasting space if you were going for air cooling only.

 

[kazuma86]

Having the flex psu in front of the case is so weird tho. One of the few SFF cases I have seen that does that.

Btw, this is from the same designer that posted the 14L unibody case here previously.

Production - Z13 14.6L One-piece molded aluminum housing Powerful compatibility

2022/12/10 First of all, We need to apologize. In the last year, we had a big problem with our production. Because the design was very difficult to produce, the yield rate was very low, about 20%, and most of the goods were scrapped, which caused us to have some orders not delivered on time at...

smallformfactor.net

Now that Z13 case is also available in taobao for deposit and pre-order for 1499 RMB

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

i prefer he make own website and payment. If using taobao need superbuy or other proxy buyer. To much fee on it.

 

[AMv8-1day]

A round up of new cases that I found recently in Taobao
XWORKS X32 (3.5L)

Small open case with Flex ATX PSU half sandwich layout
359 RMB
175x100x200mm (3.5L)

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

Am I the only one that’s absolutely in love with this ultra-small open-frame design? I’m not normally into open-frames at all, and have been debating between the FormD T1 and an ultra-small case like the Velka 3 or K39v2. But this thing would just be AWESOME on my desk!

Also, there’s a “Canadian” Xworks site charging significantly more ($179). Is this just a North American middle-man front overcharging to ship a Taobao product? Not very familiar with Taobao business practices.

 

[kazuma86]

Am I the only one that’s absolutely in love with this ultra-small open-frame design? I’m not normally into open-frames at all, and have been debating between the FormD T1 and an ultra-small case like the Velka 3 or K39v2. But this thing would just be AWESOME on my desk!

Also, there’s a “Canadian” Xworks site charging significantly more ($179). Is this just a North American middle-man front overcharging to ship a Taobao product? Not very familiar with Taobao business practices.

I love too.. i think this could be my fave open case with good cable management. I'm thinking Ryzen 5 with 3060Ti. But perhaps we got good price since price going crazy this day. Already in my chart. I think i will buy in this month.

 

[hereforthefeast]

Also, there’s a “Canadian” Xworks site charging significantly more ($179). Is this just a North American middle-man front overcharging to ship a Taobao product? Not very familiar with Taobao business practices.

The taobao listing says to order from xworks.store so I think it's the same person. Look at the taobao merchant name as well and look at the website.

 

[Sacha]

Having the flex psu in front of the case is so weird tho. One of the few SFF cases I have seen that does that.

Some of the new ZS cases have a similar layout. Specifically:
ZS-A4S V3:

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

ZS-A4M V3 (ITX gpu only):

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

Then there is also the ZS-4ADC V3 with a more traditional layout, but it only supports half-height GPUs:

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

 

[prayogahs]

Some of the new ZS cases have a similar layout. Specifically:
ZS-A4S V3:

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

ZS-A4M V3 (ITX gpu only):

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

Then there is also the ZS-4ADC V3 with a more traditional layout, but it only supports half-height GPUs:

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

Yeah i know about the ZS-A4S V3 but its a different layout as its more of a full sandwich layout but with a flex psu. Havent seen the new ZS-A4M and ZS-A4DC though. Wonder why they are revising the ZS-A4M to that layout.

 

[prayogahs]

SKTC is also releasing a cheap half sandwich layout called SKTC A07 that is just like the SGPC K39 and M24.

淘宝网 - 淘！我喜欢

淘宝网(Taobao.com)作为专业的购物网站拥有全球时尚前沿的消费者购物集市,100%认证网上商城及超值二手商品区，同时购物安全，产品丰富，应有尽有,任你选购,让你尽享网上在线购物乐趣！

item.taobao.com

 

[cblueprint]

9.1L ACAT 3 V2.0 Mini ITX Case

Easy case to build in

 

[biopunk]

SSUPD Meshlicious should be released on Taobao at the end of this month. Please post a link if you see it

 

[thelaughingman]

Decided to see what this case was all about. It's technically no longer SFF at 21.8L but is pretty cheap and allows for some serious airflow.

I'll post more pics when it arrives.

hey wondering if this is you


I'm a bit tired of waiting for them premium cases to materialise so this case with potential for dual 360mm rad got my interest piqued! this is the only Youtube video that I found but it's in Chinese and no CC



much appreciated if anybody that has gotten the case can help me with some questions. cheers!

 

[ninjanymo]

See if Captain S V1.2 meets your requirement or not?

Captain S v1船長全鋁定製miniITX小主機殼支持ATX電源-Taobao

歡迎來到淘寶船長主機殼，選購Captain S v1船長全鋁定製miniITX小主機殼支持ATX電源，該商品累計熱賣3件，好評率100%，38用戶購後寫下真實評論。顏色分類：3位硬碟邊條（一對）,側面透明玻璃升級爲鋁合金板,側面透明升級爲多層鍍膜鋼化玻璃,V1.2銀色一側鋁一側透明鋼化玻璃,機體改黑色,V1.2第二硬碟支架,ATX改SFX電源支架,開關改紅色,2位硬碟邊條（一對）,側面透明升級爲灰黑色鋼化玻璃，快來查看更多買家秀和測評，讓你放心淘到寶！

world.taobao.com

Looks nice, but not quite it. Still prefer the Deng / NCase PSU orientation.

I'm on my second attempt at tryint to get the Deng F12, i.e. I'm not giving up hehe.

Anyone know if it's possible to reach those guys outside Superbuy/Taobao?