-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
SKYREACH 4 MINI (S4M)
- Thread starter Josh | NFC
- Start date
@Josh | NFC could you please add cutout options on the website for the wood 3d bezels for the S4M too? not sure if we have to email you for those
Cheers!
Cheers!
I don't know about those yet as they are much thicker. What do you want done?
Hmmm that's what I was "afraid" of. I can definitely do it for you, but it's going to be a deep gap and I'm not sure yet until I physically test it.USB cutout + the Default Skyslot GPU Vents
No worries, if its too difficult I can live without it. I can see how it'd look weird with the depth anyways. Now the real problem is picking between that frosted acrylic 2D or a 3D Walnut ;______;
Some USB sticks might not fit because they're too wide for the opening, etc. Not an issue in thinner materials.
@Josh | NFC Thanks! getting ready to order one. Also, what resistor did you use on the Vandal switches?
@Josh | NFC I just ordered the "smoked acrylic 2D Bezel" with the Skyslots + USB. I was wondering how I was going to get the USB slots cut, but now it doesn't seem to be a problem!
Also, what are the dimensions for the opening for the usb port hole? I want to make sure the product I'm ordering is compatible.
Also, what are the dimensions for the opening for the usb port hole? I want to make sure the product I'm ordering is compatible.
Last edited:
KMPKT has a plan for that but I'm retarded with electricity and don't understand how it would work :/
Just getting ready to push the button on this case with the various fittings & PSU options etc.,
Can anyone confirm if the front panel usb port openings become obscured by the HDplex 400 installed between the chassis rails in it's normal standard location. It looks just about possible if the HDplex is positioned tight in the corner of the case but can't tell for sure looking at photos & videos?
Update:-
I've just realised that the on/off switch is also in this location, and prevents the HDPlex from being positioned tight into the corner so I'm guessing the front USB ports are a no go with the HDPlex 400
Can anyone confirm if the front panel usb port openings become obscured by the HDplex 400 installed between the chassis rails in it's normal standard location. It looks just about possible if the HDplex is positioned tight in the corner of the case but can't tell for sure looking at photos & videos?
Update:-
I've just realised that the on/off switch is also in this location, and prevents the HDPlex from being positioned tight into the corner so I'm guessing the front USB ports are a no go with the HDPlex 400
Last edited:
So, I have the Maximus VII Impact board - has anyone used this in an S4 Mini and ran into issues with the daughterboard hitting the exterior of the case?
So, I have the Maximus VII Impact board - has anyone used this in an S4 Mini and ran into issues with the daughterboard hitting the exterior of the case?
It absolutely will fit.
Thanks, I also don't like more complex system, but that might be the only brickless solution due to space limitation.
@Josh | NFC Sorry if this has been asked already - does the Skyreach come with a power button or can the chassis reuse existing Vandal switches bought from your store with the classic run?
The 16mm switches are universal, so you can absolutely reuse them from the S4M-C.
But good idea, in the future I will make the button aperture different so as to force users to buy more product. I think I will call it S4-Coffee Lake.
The 16mm switches are universal, so you can absolutely reuse them from the S4M-C.
But good idea, in the future I will make the button aperture different so as to force users to buy more product. I think I will call it S4-Coffee Lake.
Hey as the owner of a 8700k I resemble that remark.
Custom engraving! Oh come on, you're going to make me make my build official?
Okay.
Fine.
Jerk.
Okay.
Fine.
Jerk.
Similar threads
