Production SFFtime presents: P-ATX V3 - 10.4L evolution of ATX console case

[riba2233]

Riba, I was wondering: Do you have a rough timeline for when you expect to throw orders for the P-ATX v3 up? Saw that the MNLT went up recently and wondering how long the turn around time will be for the P-ATX.

Hi, it is in production, should be ready in a few weeks

 

[Meekyuu]

Hi, it is in production, should be ready in a few weeks

Awesome, thank you so much for the update. Where will the notification of stock first go out? Here, discord, reddit, etc?

 

[riba2233]

Awesome, thank you so much for the update. Where will the notification of stock first go out? Here, discord, reddit, etc?

This place is has no1 priority

 

[Mackan]

Hi, it is in production, should be ready in a few weeks

Looking forward to get one. I assume you were otherwise happy with the prototype except the "mistake" with the front panel they made? It seems sturdy enough? And I assume you will offer it powder coated in black?

 

[riba2233]

Looking forward to get one. I assume you were otherwise happy with the prototype except the "mistake" with the front panel they made? It seems sturdy enough? And I assume you will offer it powder coated in black?

Yeah it was very sturdy, much more than I expected. Just fixed a small tolerance issue around the pci bracket and mbo IO, everything else was fine.

Standard white and black for start

 

[Nightblade]

Yeah it was very sturdy, much more than I expected. Just fixed a small tolerance issue around the pci bracket and mbo IO, everything else was fine.

Standard white and black for start

Quick question(though the answer may not be), if I were to put a Micro ATX board in this case, would I be able to fit a 2 slot GPU and a single slot accessory card(a sound card, a m.2 adapter card, or additional usb ports, etc.)? or would the bottom of the board block part of it?

 

[riba2233]

Quick question(though the answer may not be), if I were to put a Micro ATX board in this case, would I be able to fit a 2 slot GPU and a single slot accessory card(a sound card, a m.2 adapter card, or additional usb ports, etc.)? or would the bottom of the board block part of it?

Hi, I don't think so because mATX is not that shorter compared to regular ATX, only 6cm. Maybe if a low profile card is really low.

 

[Meekyuu]

New Barrow Slim CPU Pump Combo

Barrow has made this CPU Pump Combo block for over a year now and it's time to refresh. The block in the above picture is the new model LTPRPA-04 S which is very similar to the original model LTPRKA-04 But if you look from this side, the inlet/outlet portion of the block is much slimmer. The...

en.minicomputers.net

Darn, looks like the new Barrow Pump / Block / Res combo is 4mm too large at 63mm.

 

[riba2233]

Too bad yeah, still not really slim.

 

[Meekyuu]

They actually do have a 10w pump block combo that should fit, at around 55mm with koolance LPs I think? I might actually give it a try, considering the most you could probably fit in the case is a thick 280 with a flexatx psu

 

[Mackan]

Regarding pcie risers, do you know what 4.0 risers will fit this case? E.g. a direkt Linkup one?

 

[riba2233]

Regarding pcie risers, do you know what 4.0 risers will fit this case? E.g. a direkt Linkup one?

Yes, linkup will fit (this style, double reverse: https://linkup.one/linkup-ultra-pci...m-designed-for-itx-nvidia-itx-amd6000-series/) but will limit gpu height if you use 2slot gpu with an ATX board, but honestly shouldn't be a problem, there are barely any 2slot pcie4 gpu's and they are not that tall.

Also this one fits with full compatibility:

38.23US $ 18% OFF|Mini Chassis Pcie 4.0 X16 Riser Cable For Rtx3060 3090 Graphics Cards Itx A4 Pc Case Pci-e 4.0 Double Reverse Gpu Extension Cord - Pc Hardware Cables & Adapters - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

Also if anyone has old style gen3 risers from sandwich cases they will also fit, and I will offer cases without risers so you can save money if you already have riser.

 

[Json188]

Just asking, the size of v3 is still the same with v2, right?
Just wondering if i put atx motherboard in, will it still fit msi rtx 3070 ti gaming x trio? I do think it will not fit though.

 

[riba2233]

Just asking, the size of v3 is still the same with v2, right?
Just wondering if i put atx motherboard in, will it still fit msi rtx 3070 ti gaming x trio? I do think it will not fit though.

Hi, yes internal size is the same, outside dims are very slightly different but like 1 mm here or there.

Not really since it is a 3slot gpu :|

 

[Meekyuu]

What week of june do you believe you'll be able to put up the products for sale? Mostly just want to ensure I can grab one and forget about it until it gets here, been very busy of late.

Super eager for a 280mm custom loop flex atx build with an ITX board. :>

 

[riba2233]

What week of june do you believe you'll be able to put up the products for sale? Mostly just want to ensure I can grab one and forget about it until it gets here, been very busy of late.

Super eager for a 280mm custom loop flex atx build with an ITX board. :>

Not sure at the moment but I will write as soon as I hear some news.

 

[Houdini]

Also this one fits with full compatibility:

38.23US $ 18% OFF|Mini Chassis Pcie 4.0 X16 Riser Cable For Rtx3060 3090 Graphics Cards Itx A4 Pc Case Pci-e 4.0 Double Reverse Gpu Extension Cord - Pc Hardware Cables & Adapters - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

is this shop trustworthy? I've heard a lot of bad things about "cheap" 4.0 risers from aliexpress

 

[riba2233]

is this shop trustworthy? I've heard a lot of bad things about "cheap" 4.0 risers from aliexpress

This is official ADT shop. They make risers for like 95% of sff cases. That said, I just got one and will test it. Only have nvidia gen4 gpu unfortunately.

 

[riba2233]

Big update everyone, got my hands on packing sample, and it looks very good imho Enjoy some pictures and "professional" video:

 

[riba2233]

Also check out this awesome low profile cooler roundup from Hardware Canucks:


Especially relevant for the P-ATX Thanks Mike, you are really doing a favor for the community!