Production RCC-SMALL1 / a brickless 4L case with LP dual slot GPU support and lots of space for SSDs

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
Limited quantity available now: REVOCCASES.COM





RCC-SMALL1 provides a 4L package if you are looking for:
  • a rock solid compact case
  • decent CPU and GPU performance with internal power supply (brickless without compromise)
  • lots of internal storage for Games, Movies, Work, etc...

Features:
  • Solid aluminum extrusion chassis, anodized
  • 4L volume (225x254x70mm)
  • low profile dual slot GPU support, riser included
  • up to three 2.5" SSDs plus M.2 on your motherboard
  • support for two 60x25mm case fans
  • 41mm CPU cooler clearance
  • support for internal MEANWELL RPS200 plus ATX DC PLUGIN
  • (optional custom made top covers upon request)
  • (optional dust filter mesh)
  • (optional gold plated screws and feet)
  • (optional internal 200W power solution by G-UNIQUE & REVOCCASES)

Example configuration:
  • 65W CPU (Intel or AMD)
  • GTX1650 LP dual slot GPU
  • ID-COOLING IS-30 with NF-A9x14 HS-PWM fan /or/ NOCTU NH-L9
  • two NF-A6x25 PWM case fans
  • MEANWELL RPS200-12-C and G-Unique Archdaemon PLUGIN

Custom made panel designs: starting from EUR 15,-




Build instructions:

1) assemble your SSD(s) to the bottom of the case and route the cables



2) install your motherboard and plug in all cables



3) install your graphics card



4) install the power button and the case fans on the faceplate. I recommend making the fan on the GPU side intake and on the CPU side exhaust.



5) install the faceplate and check if everything is hooked up



6) if you like you can stick some dust filter mesh to the top cover.



7) install the case feet (gold is optional, standard is black)



8) ready to rock



 
Last edited:

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
What sort of PSU would you be using for this? DC-ATX + a Meanwell of sorts? Is it also going to be pre-wired?

The case would come with a G-Unique 200W DC ATX PLUGIN and a MEANWELL AC-DC PSU. All pre-wired, tested and ready to use. Just plug it in.
 
Last edited:

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
yes.

i'm interested in this case, with 49mm CPU cooler support.

I could probably make a special version. Without 2.5" SSD support. Then you can fit a 49mm cooler. But why not use the Noctua L9a or ID cooling IS30? Both good coolers for mid range systems like this. Which cooler are you thinking of?
 
Last edited:

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
Not the one who asked, but with 47-49mm I can imagine the usual "Dan A4 suspects", like Cryorig C7, Black Ridge etc.

It's not too difficult to offer a " performance version" which drops SSD support and would allow for taller coolers.

Although I think there are enough good coolers which would fit with sub 41mm like the Noctua (premium) or IS30 (budget).

NFC did a good overview here for his S4M:

 
Last edited:

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
can you include 3 silver-color cases, with 49mm CPU cooler support ?

i'm willing to pay in advance.

Noted: three silver performance edition cases for you

You can place your order when everything is ready. I don't accept payment so early in advance. You never know if something goes wrong in production... or if I had a design brainfart somewhere... XD
 

cleveland

Master of Cramming
Sep 8, 2016
455
240
Finally! I got sick of all those SFF cases made for the RTX 3080...

Would be possible to buy it without the Meanwell + DC-ATX combo?
 

smitty2k1

King of Cable Management
Dec 3, 2016
967
492
first few cases are ready and I did a quick sample build to show you what it looks like (more pictures in first post)...





Results from a quick thermal test with my R5 2600 and GTX1650

  • CPU cooler: ID-Cooling IS30 with 92x15mm fan
  • Case fan: one Noctua NF-A6x25, exhaust for GPU
  • all BIOS settings at default
  • ambient temperature: 28C

Idle
CPU: 45C
GPU: 40C

1080p Gaming
CPU: 72C
GPU: 79C
No interior shots? :)