Production Stratos Series, APU and LP GPU Acrylic cases.

smitty2k1

King of Cable Management
Dec 3, 2016
978
500
We will be releasing 3 versions of the Stratos series to start:

Stratos: APU Case, support for HDPLEX + 47mm cooler
Stratos X: LP GPU, support for hdplex + 69mm cooler.
Stratos Aer: Single Slot full height, 135mm cooler, hdplex (to be joined later)



It will be made from acrylic + 3d printed parts. There will be a whole family of Stratos regardless of your needs. It will be made locally in USA.

Looks neat, glad to see you're still making cases
 
  • Like
Reactions: Analogue Blacksheep

ondert

Airflow Optimizer
Apr 16, 2017
345
163
Nice! Looks like everyone will be happy with three different versions. What are the volumes of each of them?
 

Quigonjinn

Trash Compacter
May 8, 2023
43
29
I was able to get to the stratos page through google search but not through the shop link on your site. Are these cases available for order yet or still waiting to be released for pre-order? Thanks!
 

IntoxicatedPuma

Customizer of Titles
SFFn Staff
Feb 26, 2016
992
1,272
We will be releasing 3 versions of the Stratos series to start:

Stratos: APU Case, support for HDPLEX + 47mm cooler
Stratos X: LP GPU, support for hdplex + 69mm cooler.
Stratos Aer: Single Slot full height, 135mm cooler, hdplex (to be joined later)



It will be made from acrylic + 3d printed parts. There will be a whole family of Stratos regardless of your needs. It will be made locally in USA.
Any estimate for availability? Sounds like my cup of tea!
 

Thehack

Spatial Philosopher
Original poster
Creator
Mar 6, 2016
2,811
3,669
J-hackcompany.com
Available here: https://j-hackcompany.com/?product=j-hack-stratos-x#case


  • 4.6L case for Mini-ITX
  • Up to 175mm Dual Slot LP GPU [RTX A2000]
  • Up to 69mm CPU heatsink clearance
  • Real hardwood panel with optional USB-C
  • Modular power inputs: Support HDplex 250w GAN + many DC plug-in boards with included adapters
  • Support 80mm top/bottom fans & integrated GPU deshroud
  • Support inverted layout (flippable faceplate and case feet)
  • Support HTPC (horizontal) position with alternate round case feet



 

robbee

King of Cable Management
n3rdware
Bronze Supporter
Sep 24, 2016
881
1,387
Hey, that looks really good! How much clearance is there between the pcb of the GPU and the bottom panel? Would be nice to know which fans I can use when deshrouding a GPU.
 

Thehack

Spatial Philosopher
Original poster
Creator
Mar 6, 2016
2,811
3,669
J-hackcompany.com
Hey, that looks really good! How much clearance is there between the pcb of the GPU and the bottom panel? Would be nice to know which fans I can use when deshrouding a GPU.
From the PCB, there is about 50mm or so.
You should be able to do 80x20 or 80x25 fan set up depending on the size of the cooler.
 

Mackan

Airflow Optimizer
Jun 2, 2016
309
161
@Thehack Is the case a combination of acrylic and 3d printed parts? It seems the corner pieces are 3d printed, as well as the entire back panel?
 

robbee

King of Cable Management
n3rdware
Bronze Supporter
Sep 24, 2016
881
1,387
Literally one more millimetre, and the NH-L12S would fit... Just why?

Odds are it fits anyway. Different sockets have different heights so it's hard to give a 100% accurate clearance number.
 

Aluminyum

Cable-Tie Ninja
May 3, 2019
150
192
Bend it, people used to put them in the 66mm Ghost S1.
It could be done, but that's beside the point.

Odds are it fits anyway. Different sockets have different heights so it's hard to give a 100% accurate clearance number.
I'm just wondering why saving 0.05L of volume was deemed more important than officially supporting (arguably) the best low-profile cooler on the market.