Got mine on Friday. There are some bubbles but no big deal. The wood has some imperfections though and that sucks since it is the front panel. I will try to upload some pictures later and give my thoughts on the case.
Here are the pictures for my densium 4+:
CPU is a 5600 cooled by Z39
GPU is an EVGA 3060 TI XC
Motherboard is an MSi 450i
My thoughts on the cooler:
Extremely noisy, I need to swap it for a noctua and pray it is a bit more quiet. The screws were extremely tightened and for a moment I thought I was going to "break" the screw with the screwdriver. Unfortunately the paint job was slightly damaged on one of the pipes and you can see the copper
The riser (3rd gen) works as intended, no complains.
The PSU works perfectly, Jon from overtek did an excellent job, I haven't heard the fan yet (might be because of the CPU fan though, lol. Totally recommended nevertheless.
Now, as for the case:
1. the long silver hollow studs (I have no idea how to call them) were very tightened and I had to use pliers to unscrew them, hence the marks
2. there is a small gap when you close the side panels - hardly visible on sight but if you press them to the frame you can feel that it is not fully closing
3. there are small paint marks. I noticed like 1-2 marks but it's not a big deal
4. the wood panel came slightly damaged and you can actually see the marks on it. It is a "problem" because it's the part you see the most
Last picture has a beer for size comparision. A real life comparision would be "as long and as tall as your hand".
Overall thoughts on the case: good overall quality but it needs a better QA - at least on the wooden panels since it's the most enticing feature.
That may just be led flicker due to the shutter speed setting of the camera.
www.scienceabc.com
