Updated the first post, thanks.
NCASE M1 V6 GPU Compatibility List
- Thread starter Necere
- Start date
Inno3D ichill x3 3090 can be install inside ncase m1 v5 with front panel removed
@exzacklyright: They are linked on the first page "https://www.moddiy.com/products/GPU...180-Degree-Angle-Connector-Adapter-Board.html"
You can also get them on Amazon.
You can also get them on Amazon.
Inno3D ichill x3 3090 can be install inside ncase m1 v5 with front panel removed
Impressive. How will you power the system on?
I am using the original power button and the short pin connector is coming out from 2.5" ssd mounting hole in the front. ?
Wait isn’t the Ventus 323mm (according to Caseking).Are there more detailed photos available?
Your probably thinking of the MSI Gaming Trio, that cards is 323mm. The MSI Ventus in 305mm.
Hey guys,
This week my new M1 V6.1 arrived. Super Happy with it so far.
Beeing new in the SFF Community, but having done many "normal" Builds, I was mildly shocked to read That my beloved MSI GTX 1070 Gaming X8 will not fit. At least that is what I read at all Sourced I found about it.
I can not say it is without Compromise, but my MSI GTX 1070 is fitting just fine. 180° Power Adapters are needed.
Pics
This week my new M1 V6.1 arrived. Super Happy with it so far.
Beeing new in the SFF Community, but having done many "normal" Builds, I was mildly shocked to read That my beloved MSI GTX 1070 Gaming X8 will not fit. At least that is what I read at all Sourced I found about it.
I can not say it is without Compromise, but my MSI GTX 1070 is fitting just fine. 180° Power Adapters are needed.
Pics
Signed up just to say, EVGA 3090 FTW3 absolutely DOES FIT in a v6.1. Had to remove the front panel controls to work it into place. Left the plastic on the top-right corner, as it would have been marred otherwise.
Fits, and the side even secures in place, no noticeable bulge. Used low profile connectors (waiting on my third, only ordered 2 as I thought I would do an XC3)
Front panel just barely fits back in place with the power button - but it does! I’ve been without internet for over 14 hours now (and terrible cell service out here) - but I have plenty of pictures, and will upload and post as soon as my internet is back up.
I honestly don’t think you could fit a bigger card in here, with everything intact. Barely a single mm to spare.
One last detail - I was using 120x15mm fans in the bottom, even with my EVGA 2080 Super XC Ultra. I removed them for my test fit, to give myself room to work with. That said, there absolutely is NOT any room for them with this card installed.
I’ll post about temps and whatnot once the internet is back up, and I can download some things to tax it a bit. I’m so glad this worked! My next stop was probably going to be a Sliger SV590, but I really like having such a small, power-dense machine. Glad it gets to stay that way!
Fits, and the side even secures in place, no noticeable bulge. Used low profile connectors (waiting on my third, only ordered 2 as I thought I would do an XC3)
Front panel just barely fits back in place with the power button - but it does! I’ve been without internet for over 14 hours now (and terrible cell service out here) - but I have plenty of pictures, and will upload and post as soon as my internet is back up.
I honestly don’t think you could fit a bigger card in here, with everything intact. Barely a single mm to spare.
One last detail - I was using 120x15mm fans in the bottom, even with my EVGA 2080 Super XC Ultra. I removed them for my test fit, to give myself room to work with. That said, there absolutely is NOT any room for them with this card installed.
I’ll post about temps and whatnot once the internet is back up, and I can download some things to tax it a bit. I’m so glad this worked! My next stop was probably going to be a Sliger SV590, but I really like having such a small, power-dense machine. Glad it gets to stay that way!
With any luck, these two pics should be a good teaser. Tough to test on sub-1Mb internet!
https://ibb.co/S6kdBK0
https://ibb.co/6mSygZk
https://ibb.co/S6kdBK0
https://ibb.co/6mSygZk
You just made my day! Glad to see that it fits, I’ll need to order some of those pcie adapters. Have a link for them by chance?
Trust me, it was the one huge high point in an otherwise abysmal day for me. Haha
Sorry, no link at the moment, everything takes a month to load. They’re on Amazon though, and prime as well!
No worries about the link, I was without internet for 10 days last month so I feel you pain.
I ordered these.
Amazon.com: CY ATX 8Pin Female to 8pin Male 180 Degree Angled Adapter for Desktops Graphics Card: Computers & Accessories
Buy CY ATX 8Pin Female to 8pin Male 180 Degree Angled Adapter for Desktops Graphics Card: Connectors & Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Similar threads
