-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Lian Li/DAN A4-H2O
- Thread starter dondan
- Start date
Hi, was wondering what the height limitation for the GPU/GPU waterblock is. My current one is pretty tall at 157mm
I'm in the same boat as @Aveniform - In a dan a4 at the minute and due to wantig a bigger GPU I'll swap over to the h20. @dondan I'm currently on a 3950 with the asetek 645lt, can this be installed in the h20 as a temp measure or will I need to swap AIO at the same time?
Cheers!
Or maybe an even better question, is their an air cooler that'd fit and be both good enough to cool the 3950x and be nice and quiet? Or is an air cooler going to bring things way way higher than an aio? The asetek is doing a great job for the size of the machine but if I can reduce noise down even further, all the better!
Cheers!
Or maybe an even better question, is their an air cooler that'd fit and be both good enough to cool the 3950x and be nice and quiet? Or is an air cooler going to bring things way way higher than an aio? The asetek is doing a great job for the size of the machine but if I can reduce noise down even further, all the better!
Last edited:
And is it planned as an option, at all? This seems like the case for me (Sliger vibes with T1 compatibility), but the I/O orientation breaks the deal :/
Yes it will fit
Can you link the block?
I will ask LianLi
If you found a 92mm to 120mm adapter it should fit with the 645lt. Or you attach it only with two screws.
The H2O isnt great for cpu air cooling because of max height of 55mm. So L9i/L9a is maximum like in the original A4-SFX.
Yes this one will fit.
Sure things, it's EK's Vector Trio.
EK-Quantum Vector Trio RTX 3080/3090 D-RGB - Nickel + Acetal
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for MSI® Trio RTX 3080 and 3090 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.
www.ekwb.com
Super, thanks for the clarifications. Will follow your recommended bits and just do it all in one go then!
Will this only fit 240mm radiators?
I feel like there's conflicting information because I see people talking about 280mm in this thread
I feel like there's conflicting information because I see people talking about 280mm in this thread
Mainly 240mm, but technically able to do 90mm, 120mm, and a bunch of more obscure sizes too. The 280mm is the max radiator length IIRC. A 280mm radiator will be a bit longer than 280mm (and also too wide; >140mm).
@SuperSmashedBro: All started with the question how much space there is for radiators. The radiator + fan space is 133x280x55. This is the max outer dimension. A typical 240 Radiator is 120x275x30 while a typical 280 Radiator is 140x317x30. So you see a 280 Radiator will not fit.
Is there a YouTube reviews before the pre-order date? if yes, when its gonna be out I'm so excited.
Will a tall GPU block like the EK Vector Trio (157.25mm height) fit?
www.ekwb.com
EK-Quantum Vector Trio RTX 3080/3090 D-RGB - Nickel + Acetal
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for MSI® Trio RTX 3080 and 3090 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.
www.ekwb.com
Seen this asked and you've answered you have forwarded the question to Lian Li...wondering if they've gotten back: when will shipping start for pre-orders?
Similar threads
