J-HACK Mod Shop

[Thehack]

Fab.

Yuss. Is that Yate loon fan worth my money over a 2500rpm a9x14 or ty-100?

Only if you're peculiar about the color of your fans

The yate loon is DC only so make sure your motherboard is DC fan control.

 

[Soul_Est]

That looks excellent

https://www.j-hackcompany.com

Looking forward to using this in a future build.

 

[Thehack]

https://www.thingiverse.com/thing:3018556


Fan shrouds available for download. Please PM for custom order since it is not available for storefront yet.

A user on hardforum says he has better temps with the shroud. Your results may vary. *picture by redsawn user on hardforum.com*

 

[eme]

Could you make 92mm and 120mm fan adapter to dynatron r15?

 

[Thehack]

Could you make 92mm and 120mm fan adapter to dynatron r15?

Do you have a sample you can lend me? It'll take me about 6 weeks in between my other projects to crank one out.

 

[Thehack]

L9a Almost ready for release. Let me know if you'd like to use this with a 120 x 15mm or 120 x 25mm.

Spec is at 4mm height to clear RAM. Naked RAM is recommended. 6mm version to clear LPX RAM kits, i think.

 

[smitty2k1]

L9a Almost ready for release. Let me know if you'd like to use this with a 120 x 15mm or 120 x 25mm.

Spec is at 4mm height to clear RAM. Naked RAM is recommended. 6mm version to clear LPX RAM kits, i think.

Looks nice! does anyone even make naked ram anymore?

 

[Thehack]

Looks nice! does anyone even make naked ram anymore?

I was curious about what you said so I searched and I'm quite surprised that the faster and more desirable speeds don't come in naked type. I did already make the adjustment to add mounting holes that 100% clears the RAM, offsetting towards VRM instead. I'd still avoid using the ASUS ITX motherboards though, this likely wouldn't fit. Their heatsinks also traps airflow.

 

[Kmpkt]

I would be really curious to see how this bracket affects airflow on the L9i. Hypothetically a small gap like that should allow for more normalization of airflow and pressure across the face of the heatsink improving air delivery to each individual fin. Basically would reduce the tip to hub difference in airflow. Mind testing?

 

[Thehack]

I would be really curious to see how this bracket affects airflow on the L9i. Hypothetically a small gap like that should allow for more normalization of airflow and pressure across the face of the heatsink improving air delivery to each individual fin. Basically would reduce the tip to hub difference in airflow. Mind testing?

I think because of how small the L9i is, and it makes very little difference because the 92mm fan is perfect for it. The L9a is a bit bigger as you know. I do not have an L9i so I cannot test it.

Also, the original L9a adapter that Josh currently has, what is the conclusion on it?

 

[eme]

L9a Almost ready for release. Let me know if you'd like to use this with a 120 x 15mm or 120 x 25mm.

Spec is at 4mm height to clear RAM. Naked RAM is recommended. 6mm version to clear LPX RAM kits, i think.

I would love to have 120mm version

 

[Thehack]

I would love to have 120mm version

This is the 120mm version.

 

[Elerek]

I'd be interested in a shroud to fit between an l9i/a's 92mm fan and the side of an s4-mini to reduce recycled air

 

[Thehack]

I'd be interested in a shroud to fit between an l9i/a's 92mm fan and the side of an s4-mini to reduce recycled air

It can be done.

Is there any preference between a square (octagonal) cutout or a circular cutout for the fan?

 

[Elerek]

It can be done.

Is there any preference between a square (octagonal) cutout or a circular cutout for the fan?

Octagonal is fine, but could you do one with one side that's vertical? My ram is really tall and there's only a few mm between it and the heatsink and fan.

 

[Thehack]

Octagonal is fine, but could you do one with one side that's vertical? My ram is really tall and there's only a few mm between it and the heatsink and fan.

Can you take a picture? i'd like to see the set up so I can gauge the distance.

 

[Elerek]

Can you take a picture? i'd like to see the set up so I can gauge the distance.

 

[Thehack]

I got you fam.

New product incoming.

 

[Elerek]

I got you fam.

New product incoming.

Will it be on your store?

 

[Thehack]

Will it be on your store?

Of course. It'll be available about 2-3 weeks from now. If you'd like an early sample, please PM me for the details.