Production FormD T1 Classic (READ FIRST POST)

[Wahaha360]

Finally some good news, 5950X and ROG3090 for next T1 revision, I could really use a break from manufacturing, so I guess I build.

Guess they will now make it a little bit longer to accommodate longer cards?

Hey guys do we have any news on whether the 3090 Strix fits? I've tried searching but nothing conclusive came up

Working on it, I have 5950X and ROG Strix 3090 for my setup.

The ROG 3090 is also between 2.5 to 2.75 GPU slots, which will give me some time to test offering 2.5 and 2.75 GPU Slot as an upgrade kit *without breaking compatibility.

I might have to make a custom radiator that also functions as the Top Panel for the T1 to support the heat output. As OptimumTech video shows, regular 240 AIO just won't do it.

 

[fabio]

Are you ok @fabio?

Ahahahah, well, I was curious as well to test the 120 AIO option!!

@ellroy80 here some temp after 35minutes of blender rendering.
Let me know if anyone is interested in other tests! like Prime95, etc!

Everything is in Default in the BIOS, so no tweak, to see the results ina plug and play setup.

As you can see the system gives so much voltage to the CPU that is not needed!
In general 1.3, 1.275V is needed for overclocking all cores to 4.2/4.3GHz on Ryzen 3900X.
So the temps can be lowered easily!


@clementj And here some pictures!

 

[ellroy80]

Holy smokes, those temps are awesome!

 

[kiehl]

WoW, with a single 120 AIO !!

 

[threestripevida]

I’ve been thinking about going the Fabio route and going with an aio on the cpu and air cooled gpu. I love my custom loop and it was fun, but maintenance is too much for me with school keeping me busy.

 

[PKAWA]

Maintenance?

 

[threestripevida]

Maintenance?

just keeping any eye on bubbles and filling the loop every so often. Here soon I’ll probably need to take the system apart to clean the blocks. It’s not the worst, but I’d rather not have to worry about that stuff right now.

 

[clementj]

Thanks for this @fabio ! Do you think it's the best AIO for the T1 or you just happen to have it

 

[fabio]

Thanks for this @fabio ! Do you think it's the best AIO for the T1 or you just happen to have it

I just had it! I hate a bit the sata connection cable, but the pump is almost silent!

 

[worldtour]

@Wahaha360 Any update for when accessories might launch?

 

[alololox]

How long is typical for a shipped case to sit in the 'The airline receives it'/航空公司接收 stage? Been there for the last 5 days and I'm getting real antsy ?

 

[jouz]

Hi all, I'm planning my routing for my custom loop. I saw this image somewhere (pretty sure it's an earlier build from @fabio ?).
I was wondering if anybody has done that route from CPU to GPU with 10/16mm tubes, specifically also in 3-slot mode:

 

[Navic]

Hi all, I'm planning my routing for my custom loop. I saw this image somewhere (pretty sure it's an earlier build from @fabio ?).
I was wondering if anybody has done that route from CPU to GPU with 10/16mm tubes, specifically also in 3-slot mode:

I'm pretty sure those are 10/16mm tubes. I was wrong

 

[fabio]

I'm pretty sure those are 10/16mm tubes.

Nope, this are 8/13 tubes!

 

[zacobin]

I think it's alphacool 7.6/12.7. you can tell by the 90° connectors used on the first graphics card

 

[Goatee]

Hi all, I'm planning my routing for my custom loop. I saw this image somewhere (pretty sure it's an earlier build from @fabio ?).
I was wondering if anybody has done that route from CPU to GPU with 10/16mm tubes, specifically also in 3-slot mode:

I did it with 12/10's. You couldn't do it with 16/10's.

 

[fabio]

I did it with 12/10's. You couldn't do it with 16/10's.

Maybe squeezing them a bit?

 

[max31092]

How long is typical for a shipped case to sit in the 'The airline receives it'/航空公司接收 stage? Been there for the last 5 days and I'm getting real antsy ?

That might depend on your country and delivery service. But it could be worse as COVID is on the rise.

[Germany speaking]
Posting my shortened tracking history:
(my package was anounced about 2 weeks earlier)

Mo, 26.10.2020, 10:26: delivered
Fr, 23.10.2020, 21:27, SCHKEUDITZ: arrival at DHL Station (Germany)
Fr, 23.10.2020, 06:26, HONG KONG: left DHL Station (HK)
Do, 22.10.2020, 11:57, TSING YI ISLAND: picked up by DHL


But flights might have decreased since then, so could take longer.

 

[realies]

Working on it, I have 5950X and ROG Strix 3090 for my setup.

The ROG 3090 is also between 2.5 to 2.75 GPU slots, which will give me some time to test offering 2.5 and 2.75 GPU Slot as an upgrade kit *without breaking compatibility.

I might have to make a custom radiator that also functions as the Top Panel for the T1 to support the heat output. As OptimumTech video shows, regular 240 AIO just won't do it.

Assumed a 240 AIO cooled 5950X with an air-cooled GPU (RTX 3090/6900 XT) would be possible and within reasonable temps, is that not the case?

 

[DrHudacris]

I feel like I'm at a custom water cooling anonymous meeting.... With Fabio and threestripeviada...

Hi, I'm DrHudacris and I've been addicted to custom water cooling, but now I will be going with a 120AIO and 3 slot air cooled GPU.