Production FormD T1 Classic (READ FIRST POST)

[Ray2r]

I believe I paid $35 for shipping, but I was one of the early test shippers so things might have changed, but I doubt it.

Did you have to pay any customs for the US purchase? I believe this case ships from China (from a reddit post I read)?

 

[Speedster]

Does no one have any idea whether the EK rad will cause bulging paired with the NF-A12x15?

I use the Classic SE 240 with two A12x15 chromax fans.

 

[cpt.bubbles]

Can anyone tell me if the issue on this Reddit thread has been addressed?

I'm expecting my case soon and I want to know if I should be trying to clip part of the bolt or just use three standoffs for the mobo.

 

[PKAWA]

@notbitcoin; I was wondering if you could help me buy this radiatior? https://item.taobao.com/item.htm?sp...euFRoRP&id=9037565592&ns=1&abbucket=13#detail
I've seen you talk about it and would like to build a second T1 with it.

Nevermind, i ordered it via https://www.yoycart.com/Product/9037565592/

Could you give me the length in mm of the radiator? I'd like to know if it's longer than the LT240.

 

[Caleb]

Any idea when we will be able to purchase the M19-1 to G1/4 Fittings separately? I have big plans for when this happens

 

[Mao_Setzer]

Just received my Black T1 and it's astonishing !!
Thanks Wahaha360 and all others that help you to make that case a reality ?

But look at this stunning beauty ? in E-White !
need a second T1 in this color with a Light Grey Mesh !

 

[Mao_Setzer]

By the way,
any news or progress of the official build guide of the T1 ?

 

[Navic]

Did you have to pay any customs for the US purchase? I believe this case ships from China (from a reddit post I read)?

the US does not have any customs fees, so I did not have to pay anything other than the price for the case and the shipping.

 

[PKAWA]

Once I get the coolworld radiator

Product out of stock

www.yoycart.com

i'm hoping to use

10.97US $ 10% OFF|Barrow TX360PZ, 360 Graden Rotary Offset Fittingen, G1/4 6Mm Man vrouw Extender Fittings|Ventilatoren en koeling| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

nl.aliexpress.com

5.8US $ 10% OFF|Barrow G1/4 "22 31Mm Telescopische Joint Fitting Connector Voor Sli TSSXK A01|Ventilatoren en koeling| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

nl.aliexpress.com

Alphacool Eiszapfen screw plug V.2 G1/4 - chrome

Are you tired of your unused fitting ports looking ugly due to protruding stop fittings? Have you miss-placed the original stop fittings that came with your Alphacool products? Then Alphacool has exactly the right solution for you...

www.aquatuning.nl

to have a permanent solution in the back of the case for easily filling and draining the loop.
What do you guys think?

@notbitcoin does the fillport line up with the M19-1 to G1/4 Fitting in the back of the case seen from on top of the case?

 

[Caleb]

If anyone has a non custom loop T1 and doesn't need their included M19-1 to G1/4 Fitting can you please dm me. Looking to purchase and pay for shipping to Australia so I can use in my build. no sign of it being added to the formd website any time soon

 

[PKAWA]

And one more question: Does anybody know of a low profile cpu block with integrated pump like the LT solo that is useable in 3 slot mode?
I know of the nouvolo aquanaut but with the pump and fittings this is not the solution I'm looking for.

 

[Tazpr]

And one more question: Does anybody know of a low profile cpu block with integrated pump like the LT solo that is useable in 3 slot mode?
I know of the nouvolo aquanaut but with the pump and fittings this is not the solution I'm looking for.

What about... The LT solo?

Your options are limited but I think there will eventually be W360's own solution that's listed on the FormD website.

 

[PKAWA]

What about... The LT solo?

Your options are limited but I think there will eventually be W360's own solution that's listed on the FormD website.

I have the LT240 in my case right now and it works great. It's just that i'd ideally want something a little more high quality in the same form factor for a am4 system I'm currently gathering parts for.
Can't find another solution so i think it will have to do for that build too.

 

[rarskies]

Any idea when we will be able to purchase the M19-1 to G1/4 Fittings separately? I have big plans for when this happens

Hey mate, fellow Aussie here, this fitting from
barrow (and any other m19 threaded passthrough I guess) will fit. It doesn’t sit flush like the native m19 to g1/4 adaptor but looks pretty good in black or silver. I installed this myself and currently have the nut part attached to my m19 to g1/4 adaptor to stop it spinning when adjusting fittings.
Fairly cheap and you might be able to source it on ebay if you cbf waiting a while for AliExpress/TaoBao postage.

Barrow PC water cooling G1/4 Pass Through Bulkhead Panel Case Fill Port fitting | eBay

Barrow G1/4" Female to Female Pass-Through Fittings arepanel mounted adapters with female G1/4" thread on both sides of the fitting. Barrow fittings have a great reputation in the global water cooling community.

www.ebay.com.au

 

[Caleb]

Hey mate, fellow Aussie here, this fitting from
barrow (and any other m19 threaded passthrough I guess) will fit. It doesn’t sit flush like the native m19 to g1/4 adaptor but looks pretty good in black or silver. I installed this myself and currently have the nut part attached to my m19 to g1/4 adaptor to stop it spinning when adjusting fittings.
Fairly cheap and you might be able to source it on ebay if you cbf waiting a while for AliExpress/TaoBao postage.

Barrow PC water cooling G1/4 Pass Through Bulkhead Panel Case Fill Port fitting | eBay

Barrow G1/4" Female to Female Pass-Through Fittings arepanel mounted adapters with female G1/4" thread on both sides of the fitting. Barrow fittings have a great reputation in the global water cooling community.

www.ebay.com.au

Could you send a photo of what that looks like? I really like the flush formd adapter but this could possibly fill the gap of time before they sell them separate.

 

[Lallo]

Gigabyte GeForce RTX 2080 Ti 11GB AORUS XTREME Does it fit in the FormD-T1 ? seems like the FormD allows for cards that are 59.2mm from Side Panel to GPU PCB, including 1.6mm GPU PCB). This card is 59.9 mm thick.

 

[Lallo]

Is
Alpenfohn Black Ridge v2 w/ two fans

• 92mm Fan: Noctua NF-A9
• 120mm Fan: Noctua NF-A12x15

Is this the best cooling option for air cooling if I have a 3 slot GPU in the FormD-T1 ?

 

[Rapide]

Can anybody share the link with aio compatibility?

 

[manoueltiger]

Hi all, can someone make a abstract of the different AIO/radiator compatible in this case and some tests please ?

Because i'm lost ...
I would like to take an alphacool ST30 or ST25 with noctua fan (25mm) but I saw more and more people talking about the TX240 and i never heard of this brand !

Thanks all, i'll receive mine in november

 

[ellroy80]

Is
Alpenfohn Black Ridge v2 w/ two fans

• 92mm Fan: Noctua NF-A9
• 120mm Fan: Noctua NF-A12x15

Is this the best cooling option for air cooling if I have a 3 slot GPU in the FormD-T1 ?

It won't fit with two fans in 3-slot mode. You can use a 120mm fan underneath IF you have VLP RAM, otherwise you'll need to use a 92mm fan.