Production FormD T1 Classic (READ FIRST POST)

[worldtour]

Here's a little preview of my build. Just the GPU side for now.
I'm going to keep running benchmarks and tweaking fan settings but overall it's such a sigh of relief to have it near complete.

 

[DrLeroy]

So no one who has their case yet has tried the LT Solo on the X570 strix yet to save me the trouble when i can finally place an order for this case haha?

side note my TX240 rad shipped yesterday, so i should have all parts required waiting for the ability to actually get a case soon

 

[SSJ4]

Got the 25mm-thick Coolworld 240 radiator w/ fill port in. Top (closest to camera) is Coolworld, bottom is LT240-

And for those that orient the radiator in the traditional layout (tubing ports underneath the PSU), the fill port does appear to line up very well with the hole in the back of the case if you mount the fan between the radiator and motherboard. I believe W360 has the radiator (or posted pics of it previously), so he might be able to verify it.

That is very interesting.

Would be pretty cool to plumb up to that thread for ease of filling/draining. Could you take a photo?

 

[stanleyguan]

These likely don't perform well but I found these 17mm thin radiators if anyone is interested.

Taobao shop

I actually have one of these coming my way. I doubt it will perform well though, as it has those round (instead of flat) water channels, which have been shown to not work as well. See for example https://www.xtremerigs.net/2015/05/18/aqua-computer-airplex-radical-2-copper-radiator-review/

 

[stanleyguan]

Here's a photo from the seller. I ordered the black one.

 

[threestripevida]

Here's a little preview of my build. Just the GPU side for now.
I'm going to keep running benchmarks and tweaking fan settings but overall it's such a sigh of relief to have it near complete.

that is sexy af. I kinda wish I used colored coolant now.

 

[worldtour]

that is sexy af. I kinda wish I used colored coolant now.

Thanks mate. Yea I'm sorta worried about staining on the acrylic but I just love the pink/orange hues.

Here's one more pic with some keycaps for scale.

 

[kazuma86]

Thanks mate. Yea I'm sorta worried about staining on the acrylic but I just love the pink/orange hues.

Here's one more pic with some keycaps for scale.

I don't need this! i need your video build ? I'm in love man

 

[threestripevida]

Thanks mate. Yea I'm sorta worried about staining on the acrylic but I just love the pink/orange hues.

Here's one more pic with some keycaps for scale.

 

[Psyduck91]

Here's mine. Wasn't able to fit the SSD in it's intended area so I ended up putting it behind the PSU bracket. Luckily the GPU is short enough to accommodate the SSD.

Also don't worry, I dusted off the GPU before using the computer.

 

[gwertheim]

DDC 1t plus PMW!

Thx I tried reading through thread again and finally found it about an hour after I posted that comment.

What is your second choice? It seems that ppcs doesn't ship to Canada right now and I can't find it anywhere else

 

[anx21]

Does anyone know magic cube + DDC height?

 

[thelaughingman]

What AMD AM4 cpu waterblock would you suggest ?
especially interested in the latest and greatest that "fabio" is using.

.

pretty good CPU block roundup for AM4 it's in German LOL

 

[thelaughingman]

DDC 1t plus PMW!

What's the difference between 1T Plus and the 3.25? My guess is 1T Plus has lower RPM, thus lower power consumption and noise?

For reference, Alphacool puts up this picture on their product page:

 

[fabio]

Thx I tried reading through thread again and finally found it about an hour after I posted that comment.

What is your second choice? It seems that ppcs doesn't ship to Canada right now and I can't find it anywhere else

Then, the second choice is the EKWB 3.25. But keep it at low speed, between 20 and 40 max!

 

[bynio]

I found out today on reddit that this case only supports the L12S on one direction. So if you use the case flipped then the CPU cooler will be bad positioned according to what noctua recommends.

I’ve been trying to find opinions about this but didn’t find much, so I’m asking just in case anyone knows if it is better having the case flipped despite this or having it defaultwith the good position of the L12S but the case fans on the bottom.

I'm using L12S on Aorus x570 wit pipes in horizontal position so it's the same with flipped as normal.
But right now I'm space limited so it's vertical and L12S is positiones 'incorectly'/pipes bending at the top and not seeing much temp difference, except that we're having hot summer, high ambient.

 

[gwertheim]

What's the difference between 1T Plus and the 3.25? My guess is 1T Plus has lower RPM, thus lower power consumption and noise?

For reference, Alphacool puts up this picture on their product page:

It has the fabio stamp of approval of course. Companies have to jump through hoops, spend thousands on bribes and sabotage the competition.

 

[TSOF]

Do you reckon my warranty is void?

 

[Goatee]

Do you reckon my warranty is void?

Nah, a bit of black marker pen and no-one will know.

 

[thelaughingman]

It has the fabio stamp of approval of course. Companies have to jump through hoops, spend thousands on bribes and sabotage the competition.

don't think Alphacool has gotten that memo yet haha

Do you reckon my warranty is void?

what is the width now? Will you sand down more?