Excellent! I just ordered some Kaze flex Slim's and will do some experimenting! I insist on the third fan so... Ordered the xflow! I think I will have to mod it slightly, but if it fits, it will clean up tubing runs a lot!
Someone needs to do a write up of all the things Fabio has already tested and then sticky that.SEARCH button please!
I am pretty sure the Xflow is worse compared to the normal GTS! Yes, text it! The third fan can help to gain 1/2C! I’ve tried it on the TX!
I think I will ask someone to sand 0,75mm for each side the GTS!
Yeah, for like-to-like testing, xflow is worse, but with third fan it might equal out and also the tubing runs will be better.
Cool! BTW, are you sure you can have the second fan below? I've checked the dimension and is 123mm in the part that should go inside the front strut to clean for the second fan!
BTW, there is also this Bitspower beauty, based on the LS240 of hardware labs but with 4 ports like the ST30 of Alphacool!
Maybe I will try to see if it fits with the Kaze Flex.
Otherwise, I can try with two Slip Stream 12mm 2000rpm!
And Iwant to WILL try the Magicool G2 actually! Seems to be one of the best 27mm rads!
Maybe I will try to see if it fits with the Kaze Flex.
Otherwise, I can try with two Slip Stream 12mm 2000rpm!
And I
Last edited:
BTW, there is also this Bitspower beauty, based on the LS20 of hardware labs but with 4 ports like the ST30 of Alphacool!
Maybe I will try to see if it fits with the Kaze Flex.
Otherwise, I can try with two Slip Stream 12mm 2000rpm!
And I want to try the Magicool G2 actually! Seems to be one of the best 27mm rads!
Wait, so these 29.6mm radiators fit without a problem? 29.6mm plus 14.9mm Kaze Flex comes down to 44.5mm, 2.5mm more than the 42mm limit under the motherboard...? There doesn't seem to be a visible bulge on the top panel like Optimum Tech's ST30 as well.
Never said "without a problem".
The 27mm are still the best and the limit.
The TX240 is the best radiator I've tried until now. With 3 slim fans is even better (1/2C).
I am not sure the Bitspower fits like the GTS, or even fits actually.
The GTS is mounted without bracket or screws and push against the side panels.
I am scared to ask, what build number is this?
Hold on, are you even counting? I've stopped at 2! ?
Ah fair enough. Were you part of the test shipping?
I haven’t assembled anything yet but I did just switch over the terminal fitting on my Alphacool GPU block to the SLI terminal. It comes with the GPU block. Here’s a photo of it next to the original fitting, so you can visually compare the two
Easy!
Bitspower DDC top and DDC 1T Plus PMW, HW Labs GTS240, Noctuas slim fans against the top panel, Quick DIsconnect fittings, 2 Slots mode, 1 GPU, EKWB 10/16 Torque fittings and ZMT tubing. ?
It's more that I give up following all your new builds, If I were to keep up with you on the best config, I'd be broke in no time haha. I will stick with my DC-LT 40 for the time being
lol I feel the same way. Gotta convince myself I don’t need to keep messing with my build.
I don't know where I should bring it to get sanded! I would like it though! But soon I am going on holiday, so, I will think again at it beginning of September!
@DrHudacris ACTUALLY I think that the second fan can fits! I try tomorrow maybe!
I saw this earlier when I was looking at HWL L series, it's on US Amazon so I bought it to test also! Haha, great minds! I bet with a little sanding of the sides it will fit easily.BTW, there is also this Bitspower beauty, based on the LS20 of hardware labs but with 4 ports like the ST30 of Alphacool!
Maybe I will try to see if it fits with the Kaze Flex.
Otherwise, I can try with two Slip Stream 12mm 2000rpm!
And I want to try the Magicool G2 actually! Seems to be one of the best 27mm rads!
For the xflow, I know I will have to modify the end tank a little. 3.4mm/2 so just 1.7mm of somehow modding (sand? Bend?)
And wow..you are telling me maybe 3rd fan is possible with the GTS? Of course, if the bitspower Leviathan works with 3 fans more easily, and performance isn't much worse, then I think that's the one to pick.
Similar threads
