Production FormD T1 Classic (READ FIRST POST)

[fabio]

@fabio
Do I spot a large S1 top hat somewhere in your pic? ?

Ahahahah, I’ve never noticed that this rad seems the S1 top hat! ?

 

[Hoanglh94]

I just ordered an accellero 3 for mine. IMO, it should fit just fine like a 120mm aio.

sounds like a good idea. Guess I will try the stock AIO first if I ever have chance to get one of these T1. If it does not fit then Accelero III i go then

 

[kazuma86]

Ahahahah, I’ve never noticed that this rad seems the S1 top hat! ?

Thats why, i post about top hat.. But IDK, 240 slim AIO i think enough for me, since i'm not builder like you..

 

[IIIIIIII]

Can't wait to for a proper radiator in my T1.

 

[Gerold]

Is this a 3x90 rad? Otherwise you'll have some problems fitting it ?

 

[kazuma86]

Can't wait to for a proper radiator in my T1.

I think with this size, not enough space for T1.

 

[panzermuffin]

@panzermuffin Here your panels on!
Found a temporary DIY solution to rise the fans/radiator!

This guy... <3

 

[vile]

I've tried searching this thread to no avail. Has anyone explored different low profile air coolers for a 2+ slot GPU setup? Specifications say <50mm which narrows the options a bit. Right now I'm thinking Noctuas L9A for my Ryzen 3600 to keep sound levels down, but I've read it needs a duct in some other SFF cases. Airflow overall seems better in this case than say the Dan A4, but the question is if I can get away with a n L9A without resorting to 3D printing?

 

[Cronos83]

I just ordered a Ghost S1 to have something to tinker.... Coming in at 329€ with a medium top hat (large ones are not available in Europe atm).

.....just for the upcoming month until I receive a T1 ?

Pls guys... don't tell my wife ?

 

[Gerold]

I've tried searching this thread to no avail. Has anyone explored different low profile air coolers for a 2+ slot GPU setup? Specifications say <50mm which narrows the options a bit. Right now I'm thinking Noctuas L9A for my Ryzen 3600 to keep sound levels down, but I've read it needs a duct in some other SFF cases. Airflow overall seems better in this case than say the Dan A4, but the question is if I can get away with a n L9A without resorting to 3D printing?

Interesting. From my experience the small NH-L9a (with good airflow) is completely capable to cool the 3700X without any loss of performance and also with silence. I have a thing with noise and is always my first priority.

Also great tips here for fine tuning, just to add, if it's not mentioned already, the importance of using the latest bios and the latest chipset drivers with these Ryzens.
To give an example i have my B450-I from mid 2018, first with 2600 and then with 3700X, i have used every bios that came out from the first release. All the bios for the Ryzen 3000 before the latest one are driving (default settings) the 3700X out of AMD specs (around 15W more power)!.

As an old user of Argus, can confirm that is a great software, but i think for new users and not complicated fan setups, the provided utilities or bios are also fine.

imo you should be totally fine with a 3600 and the l9a.
Haven't tested it though, as I don't have the case
Maybe @Brude27 has some thoughts on that matter?

 

[fabio]

I just ordered a Ghost S1 to have something to tinker.... Coming in at 329€ with a medium top hat (large ones are not available in Europe atm).

.....just for the upcoming month until I receive a T1 ?

Pls guys... don't tell my wife ?

Ahahahahah, I did the same! But after 3 days the T1 arrived ?

 

[Stinkybear]

I just ordered a Ghost S1 to have something to tinker.... Coming in at 329€ with a medium top hat (large ones are not available in Europe atm).

.....just for the upcoming month until I receive a T1 ?

Pls guys... don't tell my wife ?

I'm tempted to do the same. Maybe also with the H1. I don't know if this will fly with the wife, "But I need the actual cases on my desk for comparison."

 

[Cronos83]

"But I need the actual cases on my desk for comparison."

Just do it!
If you don't, you'll always wonder if the case you bought was the right choice....

 

[bynio]

I just ordered a Ghost S1 to have something to tinker.... Coming in at 329€ with a medium top hat (large ones are not available in Europe atm).

.....just for the upcoming month until I receive a T1 ?

Pls guys... don't tell my wife ?

Ahahahahah, I did the same! But after 3 days the T1 arrived ?

I'm tempted to do the same. Maybe also with the H1. I don't know if this will fly with the wife, "But I need the actual cases on my desk for comparison."

Did exactly the same, but returned top hat. Now cannot travel to where my T1 is waiting for me.

 

[Stinkybear]

Just do it!
If you don't, you'll always wonder if the case you bought was the right choice....

Or rely on @fabio to compare the T1 to his Ghost. I take it he's enjoying the T1 more. I was waiting for either mkIII to come out or at least for noctua to release their cooler but with the T1, I can use the l12s as is. I'm more interested in the comparison between the T1 and P1 so I'm waiting for either T1 availability or P1 prototype to settle on one.

 

[inksoldier]

I've fallen deep in the sff rabbit hole at the worst possible time with this global pandemic. Looking to upgrade after 6 years.This T1 sure looks nice

 

[Truth]

Wish I could've gotten an answer over the last 2 days, but still hoping wahaha might see it.

 

[threestripevida]

Wish I could've gotten an answer over the last 2 days, but still hoping wahaha might see it.

What do you need answered?

 

[pslate]

Unfortunately I didn't see any for the "flipped" PSU orientation

Same. I was thinking about ordering two sets of the cables. Knowing Pslate though the cables will be the perfect length to not cause interference with fans and tubing.

Or you can put a note on the order and ask for the flipped orientation

Yep, just leave me a note! I didn't get to the flipped setup yet (SV590 build last week took too long) but will be measuring for it soon.

 

[gwertheim]

Yep, just leave me a note! I didn't get to the flipped setup yet (SV590 build last week took too long) but will be measuring for it soon.

Can you let us know if the flipped setup will work with ghost cables? If not I have to go shopping again