Production FormD T1 Classic (READ FIRST POST)

[panzermuffin]

Oh well. Trying my luck. February 7 is not very senior though ?

 

[Truth]

Filled it out, sadly the same is for myself, March 19th is certainly not senior haha. But I understand the necessity of this given our current situation, I'm just hopeful I can get a shot at this in June so that my build goes smoothly.

 

[cldskt]

2020-04-15 Update: T1 Reserve Survey

Due to the supply limitation of the T1, we are considering a reserve for people that have followed the project for a long time. So this survey is for collecting information to help us identify seniority, which helps me determine how much inventory to hold for senior followers.

There are definitely a lot people who have been following this project longer than me, and I think they should get priority over me. But how do you propose people who have gotten the case through QQ Group from getting another one? Or is that just how it is? ?

 

[poleajae]

Well... an obligatory post to show I was here, have enjoyed following your project.

 

[JayRello]

There are definitely a lot people who have been following this project longer than me, and I think they should get priority over me. But how do you propose people who have gotten the case through QQ Group from getting another one? Or is that just how it is? ?

He has their user names from when they made an order.

 

[pathadkhung]

This June is pre-order right and all country shipping ?

 

[gwertheim]

This June is pre-order right and all country shipping ?

Well with the virus coming back for round 2 in China we'll see what happens

 

[Wahaha360]

I see accessories listed in the survey. Can test shippers submit a survey? I am interested in some of those accessories!

Yes

 

[Wahaha360]

There are definitely a lot people who have been following this project longer than me, and I think they should get priority over me. But how do you propose people who have gotten the case through QQ Group from getting another one? Or is that just how it is? ?

QQ group has V1, June gets V1.1

 

[cldskt]

QQ group has V1, June gets V1.1

Gotcha. Means if QQ buyers want to get a hold of another one (despite being different than the V1 they have), they can. I'll be patiently waiting and keeping my fingers crossed then ?

 

[Truth]

I know you are generally against people trying to use anything aside from the LT240, but I genuinely have to ask if this is possible.
The LT 240 = 270 x 120 x 25mm
The NexXxoS ST30 (Optimum Tech's video) = 275 x 124 x 30mm
The EK-AIO 240 D-RGB = 275 x 120 x 28mm

Therefor, couldn't I theoretically fit the EK-AIO 240 D-RGB with thin fans?
Would want this setup so I could expand in future in a similar, but less gunk-chance way than the LT-240.

Thanks for any response, @Wahaha360

 

[gwertheim]

I know you are generally against people trying to use anything aside from the LT240, but I genuinely have to ask if this is possible.
The LT 240 = 270 x 120 x 25mm
The NexXxoS ST30 (Optimum Tech's video) = 275 x 124 x 30mm
The EK-AIO 240 D-RGB = 275 x 120 x 28mm

Therefor, couldn't I theoretically fit the EK-AIO 240 D-RGB with thin fans?
Would want this setup so I could expand in future in a similar, but less gunk-chance way than the LT-240.

Thanks for any response, @Wahaha360

Check the specs in the first post then talk to @fabio if I'm not mistaken he's done a build without a lt240. @Wahaha360 has tested at least 5 or 10 rads with a couple of degrees difference.

To be fair to the lt240, you are replacing the liquid and the tubing for it to fit in the case properly. So there is less chance of gunk build up if you use rubber tubing. It's been discussed in great detail in this thread.

If i am not mistaken the max thickness you can go is 25 mm because the Noctua NF-A12X15 is 15mm thick which is the max amount of room you have to work with. Again @fabio or someone with the case will have a better idea

 

[Madhawk1995]

Posting for reserve list as well. Created this account 2 days after my birthday hoping I could get the t1 the same week back in September obviously that didn't happen and I went with a ghost and done a ton of mods. As of now direct die 9900k 5ghz 240 aio and running a stock air cooled gpu. Looking to shove a LT240 in t1 for cpu and arctic accellero 3 for gpu unless I can snipe a great deal on a 2080 ti strix. Still miss my strix 2080 after selling it for a evga 2080 2 slot for ghost.

 

[Truth]

Check the specs in the first post then talk to @fabio if I'm not mistaken he's done a build without a lt240. @Wahaha360 has tested at least 5 or 10 rads with a couple of degrees difference.

To be fair to the lt240, you are replacing the liquid and the tubing for it to fit in the case properly. So there is less chance of gunk build up if you use rubber tubing. It's been discussed in great detail in this thread.

If i am not mistaken the max thickness you can go is 25 mm because the Noctua NF-A12X15 is 15mm thick which is the max amount of room you have to work with. Again @fabio or someone with the case will have a better idea

Yeah no I get the point of the LT240 and was originally planning to do it, but with Optimum Tech's 3 videos he shows that we can fit more than the 25mm thickness, as his radiator is 30mm thick, which I noted in the question, therefor my 28mm 240 should fit just fine with the slim fans.

 

[FischOderAal]

2020-04-15 Update: T1 Reserve Survey

Due to the supply limitation of the T1, we are considering a reserve for people that have followed the project for a long time. So this survey is for collecting information to help us identify seniority, which helps me determine how much inventory to hold for senior followers.

Aaaaw. Shucks. I just recently got to know about this NCase M1 v1 SN112 reporting in Even though I am currently on a Dan Case A4. This case looks to me like the perfect mixture of both worlds. Thank you very much for your continued efforts!

 

[gwertheim]

Yeah no I get the point of the LT240 and was originally planning to do it, but with Optimum Tech's 3 videos he shows that we can fit more than the 25mm thickness, as his radiator is 30mm thick, which I noted in the question, therefor my 28mm 240 should fit just fine with the slim fans.

Check out @fabio build log, he has detailed parts list and measurements.

FormD T1 - 9.5L with UNLIMITED space!! - 3950X+64GB Ram+2GPUs - TITAN V FULL watercooled+TITAN RTX!! Fill the void 2.0

And again, here we are!! After 1 year and a half from my 2nd build (BTW, CHECK IT HERE if you didn't) I've moved part of it with new addition in a smaller case: THE FormD T1 !! This case is a small CNCed Aluminum jewel! I am so happy to got the possibility to be in the test shipping phase...

smallformfactor.net

 

[fabio]

D15S?
I've been considering using the case like this for a while now, but I'd hate to just not use those awesome mesh side panels

Well, you can just cut half of 1 mesh panel and still having in place 3/4 of them!

With the D15 Chromax will be so sleek! Ahahahahah!

 

[FischOderAal]

To be fair to the lt240, you are replacing the liquid and the tubing for it to fit in the case properly. So there is less chance of gunk build up if you use rubber tubing. It's been discussed in great detail in this thread.

With the thread search I wasn't able to find the discussion. The point is that the tubes should be shorter to fit properly. And why replace the liquid?

 

[gwertheim]

With the thread search I wasn't able to find the discussion. The point is that the tubes should be shorter to fit properly. And why replace the liquid?

You can of course save it if you choose. To each their own

 

[Gerold]

Well, you can just cut half of 1 mesh panel and still having in place 3/4 of them!

With the D15 Chromax will be so sleek! Ahahahahah!

Just waiting patiently for the T1 over here ?