DAN A4-SFX v4.1

[fabio]

Keep in mind the 2700X is 15°C lower in temps than displayed. AMD use this temp offset to have the fans more aggressive to reach higher clocks if the temps are good. The default 2700 has a higher temp limit and no offset. So in you usecase if you would have a 2700 none X and clock it to the same clock the temps would be 15°C lower without throttle

I didn’t know that!
But about the temp, are you sure? I am pretty sure that the wrong reading temp has a delta of only 5 degrees and not 15...

 

[fabio]

ah.. everything was all compressed. lol so i can hardly see it, you got discord by the way? would love to get some more info, if you don't mind

Yes, just ask!

 

[dondan]

@fabio: Sorry I was wrong the offset is 10°C

1x00X = 20°C offset
2x00X = 10°C offset

https://community.amd.com/thread/231239

 

[fabio]

@fabio: Sorry I was wrong the offset is 10°C

1x00X = 20°C offset
2x00X = 10°C offset

https://community.amd.com/thread/231239

Yes yes, sorry, I was meaning 10 as well!!

 

[fabio]

@Tazpr How's that blackridge doing? what cpu and what are the temps etc? lettuce know lettuce know lol.

Anyway someone received an email that his/hers ADT DAN V4 Riser cable is shipped yet? I haven't got an email yet..

EDIT, no, actually I haven’r Received it. Only for the Dynamo mini ordered together...

 

[JAugust]

Ohh.. @dondan when will the risers be shipped?

and 85c on prime95 on the 2700X? I would say that's good though.. I wonder what the 3700 or even the 3700X would do under the stock blackridge.. and also @fabio - VAULT-TEC#6673 is my discord, you can talk dutch there too if you want lol.

 

[fabio]

Ohh.. @dondan when will the risers be shipped?

and 85c on prime95 on the 2700X? I would say that's good though.. I wonder what the 3700 or even the 3700X would do under the stock blackridge.. and also @fabio - VAULT-TEC#6673 is my discord, you can talk dutch there too if you want lol.

Anyway, @JAugust just received the email of the riser shipment!

 

[JAugust]

just got it too! nice.

 

[Nanook]

same

 

[fabio]

Hey @dondan and @hdplex , I have one question:

I am trying to mount the HDplex 400 in the Dan Case v3, but the PSU is going above the back of the power button. Am I missing something?
It was supposed from my side to remove the back heatsink from the HDplex?

Thanks to both!

EDIT: going through the HardForum I've found few pictures! Then I've used the standoff included.
Here a snapshot!!

 

[JAugust]

So if the HDPLEX fits there... then where does the internal 400W brick fit?

 

[fabio]

So if the HDPLEX fits there... then where does the internal 400W brick fit?

It doesn’t, the brick is outside!

 

[JAugust]

so this one doesn't fit inside? - https://www.hdplex.com/hdplex-internal-400w-ac-dc-adapter-with-active-pfc-and-19vdc-output.html

 

[fabio]

so this one doesn't fit inside? - https://www.hdplex.com/hdplex-internal-400w-ac-dc-adapter-with-active-pfc-and-19vdc-output.html

Nope, it goes against the PCIE Riser, suddenly. But in any case using a not blower GPU all the heat will go against...

 

[fabio]

Or maybe the HDplex DC can fit below the gpu and the brick vertical
Near by the GPU? Don’t know!

 

[Creep]

After I get my new RAM in, I'm going to finally lock up this A4 and take some pictures. Note to self: Don't let dust turn to cake or disassembling is in your future.

Can anyone suggest places where I can get custom extension cables aside from CableMod and overseas? Frozen CPU's office is literally 10 minutes from where I live but there prices are very high. Thinking of contacting the previous guy I had work on my S4 for some. I've been recommended lengths of:

24pin: 150mm
4x4pin: 250mm
6+2pin: 300mm

 

[dondan]

I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up

 

[DarkCanuck]

Hey @dondan and @hdplex , I have one question:

I am trying to mount the HDplex 400 in the Dan Case v3, but the PSU is going above the back of the power button. Am I missing something?
It was supposed from my side to remove the back heatsink from the HDplex?

Thanks to both!

EDIT: going through the HardForum I've found few pictures! Then I've used the standoff included.
Here a snapshot!!

Beautiful!

 

[Creep]

I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up

...annnnd there it goes!

 

[AseDen]

I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up

...annnnd there it goes!

Well look at Dan, beating me to it!