DAN A4-SFX v4.1
- Thread starter dondan
- Start date
@fabio: Sorry I was wrong the offset is 10°C
1x00X = 20°C offset
2x00X = 10°C offset
https://community.amd.com/thread/231239
1x00X = 20°C offset
2x00X = 10°C offset
https://community.amd.com/thread/231239
EDIT, no, actually I haven’r Received it. Only for the Dynamo mini ordered together...@Tazpr How's that blackridge doing? what cpu and what are the temps etc?lettuce know lettuce know lol.
Anyway someone received an email that his/hers ADT DAN V4 Riser cable is shipped yet? I haven't got an email yet..
Anyway, @JAugust just received the email of the riser shipment!
Hey @dondan and @hdplex , I have one question:
I am trying to mount the HDplex 400 in the Dan Case v3, but the PSU is going above the back of the power button. Am I missing something?
It was supposed from my side to remove the back heatsink from the HDplex?
Thanks to both!
EDIT: going through the HardForum I've found few pictures! Then I've used the standoff included.
Here a snapshot!!
I am trying to mount the HDplex 400 in the Dan Case v3, but the PSU is going above the back of the power button. Am I missing something?
It was supposed from my side to remove the back heatsink from the HDplex?
Thanks to both!
EDIT: going through the HardForum I've found few pictures! Then I've used the standoff included.
Here a snapshot!!
Last edited:
so this one doesn't fit inside? - https://www.hdplex.com/hdplex-internal-400w-ac-dc-adapter-with-active-pfc-and-19vdc-output.html
Nope, it goes against the PCIE Riser, suddenly. But in any case using a not blower GPU all the heat will go against...
After I get my new RAM in, I'm going to finally lock up this A4 and take some pictures. Note to self: Don't let dust turn to cake or disassembling is in your future.
Can anyone suggest places where I can get custom extension cables aside from CableMod and overseas? Frozen CPU's office is literally 10 minutes from where I live but there prices are very high. Thinking of contacting the previous guy I had work on my S4 for some. I've been recommended lengths of:
24pin: 150mm
4x4pin: 250mm
6+2pin: 300mm
Can anyone suggest places where I can get custom extension cables aside from CableMod and overseas? Frozen CPU's office is literally 10 minutes from where I live but there prices are very high. Thinking of contacting the previous guy I had work on my S4 for some. I've been recommended lengths of:
24pin: 150mm
4x4pin: 250mm
6+2pin: 300mm
I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up
Product page is up
Beautiful!Hey @dondan and @hdplex , I have one question:
I am trying to mount the HDplex 400 in the Dan Case v3, but the PSU is going above the back of the power button. Am I missing something?
It was supposed from my side to remove the back heatsink from the HDplex?
Thanks to both!
EDIT: going through the HardForum I've found few pictures! Then I've used the standoff included.
Here a snapshot!!
I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up
...annnnd there it goes!
I like to inform you that the Asetek 92mm AIO will be also available on SFFLab.
Product page is up
...annnnd there it goes!
Well look at Dan, beating me to it!
