DAN A4-SFX v4.1

[zeair]

What about GeForce RTX™ 3090 TURBO 24G ? Should fit right?

GeForce RTX™ 3090 TURBO 24G Key Features | Graphics Card - GIGABYTE Global

Discover AORUS premium graphics cards, ft. WINDFORCE cooling, RGB lighting, PCB protection, and VR friendly features for the best gaming and VR experience!

www.gigabyte.com

EDIT: Jusft found in this thread that fits and should be ok - ordered

 

[Kozi]

My ASUS 2070 SUPER TURBO throttles on an open bench after 2 minutes I'll never buy a blower-style card again.

Try changing thermal paste for Grizzly Condactonaut

 

[dank]

Got my GIGABYTE GeForce RTX 3060 Ti Gaming OC 8G today It's a bit loud so I'll most likely undervolt it. It went up to 74C after 10 minutes of Unigine Heaven running. Now I need to find Ryzen 5 5600x in stock and update the other side of the sandwich as well (currently it's i7-8700 (non-k)) and also install 2 noctua fans at the bottom (the one currently installed is a fan that comes with Alpenfohn Black Ridge and it's loud af).

 

[Bonusround]

How is airflow with the pass-through vent at the end of the card (beneath rightmost fan in image above)?

 

[dondan]

The normal boost clock frequency for mine is 1860-1890MHz.
In demanding games GPU operates at the temperature limit of 83 degrees and has to drop the clock frequency by ~100Mhz to stay under the limit.

Based on the tech sheet max turbo is 1800 or 1770 depending on running mode. So you are absolutely within the specs. Throttling is the wrong word for your situation, because in the IT world it means “running under/lower specs”. Also the turbo is nothing that is guaranteed 100% of running time. It is only designed for a short period or peeks. As long your card reach 1635 it is not throttling.

Sorry for beeing "correct to a dot " but I want to make clear having a blower card isn't not that bad.

 

[Min_Ahn]

Unfortunately I don't have the psu cables for this card yet...

Hey, I have a SF600 and EVGA 1080 FTW2 installed currently. Do I need to buy additional cables to feed the card? or all necessary cables come in the box?

 

[Bullz]

I didn't know until a few days ago what the difference is between a blower card and an open-air cool version *sham*. That's why I never checked why people always discuss intake outtake when it comes to the case fans.

Is that better suited for a blower card ? ( then the 3060 TI Founder Edition would work for me ) or a costum card with an open-air cooler version ?

Do you have to install the case fans in or out depending on what kind of graphics card is installed in the Dan ( want to install both on the ground ) or is there only one optimal direction no matter which graphics card and why do some people turn their power supply and maybe the effect of how I have to install the fans ?

 

[NIGEL]

Struck out on 3090,3080 and 3070, but I did manage to bag a 3060ti AIB.

Installed it in to DanA4, but not sure what to do next?

Temps seem to be around 74 playing Fortnite.

Is there any way of adding a bit of clearance between the back of the GPU and the power supply? Do I need it?

Anyways, here’s a pic! Any help is greatly appreciated.

 

[PorKOON]

If you don't need the extra mobo standoffs that come with the case, use two of them (on top of the ones already installed) to extend the GPU riser out. The extra 5mm of clearance makes a huge difference on the 3080 FE, but not sure about a 3060 AIB.

 

[NIGEL]

Were these in the box?
I’ll need to have a dig around for them.
is there a guide / pics / video of what I should be doing?

Thanks / apologies in advance!

 

[NIGEL]

Ok, have found the standoffs. I didn’t think I was so organised!

Where do I put them?!

 

[PorKOON]

Unscrew the GPU riser, install the extra ones on top of the standoffs already installed, and screw on the GPU riser.

 

[guniens]

Hi @dondan could you consider also this layout for the spacer: It looks like way more natural following the curves of the dan in my opinion. A spacer like that in alluminum would be top notch!

 

[dondan]

I do not like it.

 

[flacman]

Hi @dondan

I'm own the original Kickstarter version of the A4-SFX. Would any of your side panel concepts to date be backwards compatible?

 

[xtraj]

Hi @dondan

Hoping you can help me with the finishing touches on the build on your awesome case. I am having some problems with noise due to the case fans. I have 2 Noctua fans, both as exhaust:

- Noctua NF-A9 PWM under the PSU
- Noctua NF-A9x14 HS.PWM under the mobo (this is the noisier one, I guess because it is so close to the mobo and riser cable)

They both share a fan header so they are both controlled together.

My questions:

.: Is it necessary that these fans follow anything, in your experience and considering I am only running a 65W TDP CPU? They are almost silent up to 30%, so I am tempted to just set them at 30% and leave them there
.: If that's not enough, is there a general fan curve you'd recommend? I am running FanControl at the moment so have them set up to follow CPU, GPU and System temps

The rest of the system:

- Mobo: MSI MPG B550i Gaming Edge WiFi
- CPU: Ryzen 5600x
- Cooler: Alpenfohn Black Ridge + 92mm Noctua fan set as intake through the heatsink
- PSU: Corsair SF600 Platinum
- GPU: Radeon RX 6800 reference

Thank you!

 

[acj21]

In order to fit the 3080 FE in a Dan case a4, does it HAVE to be flipped or is there any way to not do the ol flip?

 

[kiehl]

Hi @dondan

Hoping you can help me with the finishing touches on the build on your awesome case. I am having some problems with noise due to the case fans. I have 2 Noctua fans, both as exhaust:

- Noctua NF-A9 PWM under the PSU
- Noctua NF-A9x14 HS.PWM under the mobo (this is the noisier one, I guess because it is so close to the mobo and riser cable)

They both share a fan header so they are both controlled together.

My questions:

.: Is it necessary that these fans follow anything, in your experience and considering I am only running a 65W TDP CPU? They are almost silent up to 30%, so I am tempted to just set them at 30% and leave them there
.: If that's not enough, is there a general fan curve you'd recommend? I am running FanControl at the moment so have them set up to follow CPU, GPU and System temps

The rest of the system:

- Mobo: MSI MPG B550i Gaming Edge WiFi
- CPU: Ryzen 5600x
- Cooler: Alpenfohn Black Ridge + 92mm Noctua fan set as intake through the heatsink
- PSU: Corsair SF600 Platinum
- GPU: Radeon RX 6800 reference

Thank you!

Just to let you know, 5600x is hot as F"£$k, and with asetek 645lt and all possible fans that this case can fit, it's still super hot. Now when playing cyberpunk I am reaching temps 96 with this CPU ;p

 

[Intrepid_Cosmonaut]

Just to let you know, 5600x is hot as F"£$k, and with asetek 645lt and all possible fans that this case can fit, it's still super hot. Now when playing cyberpunk I am reaching temps 96 with this CPU ;p

Honestly sounds like you have an issue with your installation or your asetek unit. The 5600x is very well documented to run cooler even then the 3600 when running on stock settings. I have one installed in a slim console case under a small air cooler (Thermalright AXP-90) and temps are well under control when loaded.

 

[Kozi]

See my previous posts, I’m running same setup but with 5800x which gets even hotter and temps while gaming never cross 80C. You have to use liquid metal though like Grizzly Condactonaut. Still 95C seems too high for me, are u sure you have applied your TP correctly?

Just to let you know, 5600x is hot as F"£$k, and with asetek 645lt and all possible fans that this case can fit, it's still super hot. Now when playing cyberpunk I am reaching temps 96 with this CPU ;p