No, 37 is the max.
No, 37 is the max.
Guys, good news. We test anodizing. Black, Grey, and White.
I'll share photos later.
The thing is the space between the tip of the 24 pin connector and the motherboard might not be very little. I don't have a motherboard here to measure it, but I feel like it'll fit but touch the side of the case. The biggest problem will be the connector on top of that Realan unit.If the case can fit a 37mm cooler, which goes on top of the socket and ihs (which combine for 7.781mm), then it should fit just fine. You should have 6.281 mm clearance, minus whatever space is between the tips of the 24 pin connector and the motherboard (very little).
I'd be willing to bet an ITX-sized 1080 (or 180W equivalent) would be out within a year.
You'd have to completely replace the cooler, as the entire heatsink protrudes 30 mm or so past the PCB and past what this case supports. I'd be curious to see a mod where a Gigabyte 1070 Mini's cooler is placed on the Zotac 1080 Mini and tested as a proof of concept, if that's even possible.
You'd have to completely replace the cooler, as the entire heatsink protrudes 30 mm or so past the PCB and past what this case supports.
I'm pretty sure that would ruin the heatpipe.