Production cases: SLM1m/ SLM1 4L/ SLM2 5.7L by Custom_MOD

[paullusty]

Hello friends!

Since the current design of the case is difficult to produce, we stopped production. Now we are working on a new design. Soon we will show you the prototype.

If you want to make an order for the old case you can write us a message.

will the new design have a 300w internal psu design option? or is that project canceled?

 

[sergiiua]

will the new design have a 300w internal psu design option? or is that project canceled?

We are faced with the heat problem of this power supply. It is suitable only for assembling 100-150W maximum.

 

[paullusty]

oh i see, dont worry then! you've got to keep the temps down in such a small build
i look forawrd to seeing the new designs!

 

[Instran0]

We are faced with the heat problem of this power supply. It is suitable only for assembling 100-150W maximum.

my G-Unique PSU for this case, was set by gury at 265W, & it works perfectly.

 

[Instran0]

Hi there, has batch #6 shipped ?

sergiiua sent mine from batch #6.

 

[sergiiua]

Hello people!

We solved all problems with production. We continue to do this case for you. Order form is now one for all our products.

 

[malnosaj]

Hopefully it's not a stupid question, but does the slim case 3.7l only accept the gunique psu?

I'm only planning to run a gtx1060.

 

[sergiiua]

Hopefully it's not a stupid question, but does the slim case 3.7l only accept the gunique psu?

I'm only planning to run a gtx1060.

you can use another suitable power source.

 

[Instran0]

We solved all problems with production.

this is true.

my G-Unique PSU for this case, was set by gury at 265W, & it works perfectly.

btw, i have the internal G-Unique PSUs that go with these cases, & i've tested them.

i can confirm that they're stable at 265W, & will probably go higher at peak.

i have never ordered any cases that weren't " brickless " .

 

[SilverJS]

i have a few extra of these cases.

PM'd.

 

[SilverJS]

I'm assuming the HDPLEX 160W DC-ATX module would fit in here? I have a line on a used one. This would be with a Z270-I Strix and NH-L9i, for reference.

 

[Instran0]

you can use another suitable power source.

the 400W HDPLEX internal unit that isn't released yet, will fit in my case.

 

[SilverJS]

So could someone confirm please - there IS a way to run these cases brickless, right?

 

[Instran0]

So could someone confirm please - there IS a way to run these cases brickless, right?

sergiiua's prototype version is big enough to fit an internal PSU.

his original version is not.

 

[SilverJS]

So if I place an order with him now, today, I'll get the prototype that'll fit an internal brick then?

 

[Instran0]

So if I place an order with him now, today, I'll get the prototype that'll fit an internal brick then?

you need to identify what internal PSU/video card, you're using first, & then find their measurements.

afterwards, you'll provide the total of those to sergiiua, so he can make a prototype that will fit them.

for example- if you're using a 31mm deep MeanWell, with a 211mm long Zotac GTX1080, you'll need a prototype that is several millimeters more in depth, than 242mm.

31mm + 211mm = 242mm

 

[Instran0]

I definitely would be .

not in stock.

 

[sergiiua]

 

[Nichronos]

@sergiiua do you plan to do a 5.0L variant of the M1 SLIM case
for the upcoming HDPLEX 400 internal AC-DC and when do you plan to release it?

 

[sergiiua]

@sergiiua do you plan to do a 5.0L variant of the M1 SLIM case
for the upcoming HDPLEX 400 internal AC-DC and when do you plan to release it?

I have not planned it yet.