Problems should not be. Place for installing the video card 42mm.
Giga GTX 1080 Mini ITX 8G H=37 L=169 W=131 mm
Giga GTX 1080 Mini ITX 8G H=37 L=169 W=131 mm
i own a CustomMod Slim prototype case, similar to the one in the photo above.
about my case :
screw holes where gury's internal PSU would attach to this case, are not made by the factory. you have to drill them yourself, in order to attach this power supply.
Last edited:
Party 7 was sent.
Party 8 is still in the process. The plant still has not sent the details. They promised to send it before the holidays. We apologize for the delay.
Party 12 will be closed early on January 15.
Party 8 is still in the process. The plant still has not sent the details. They promised to send it before the holidays. We apologize for the delay.
Party 12 will be closed early on January 15.
i've tested this prototype.
in order for cooling to work properly, it requires a CPU fan with a copper heatsink.
therefore, customers will need to request a modified version, with a height of 73mm.
Last edited:
Noctua NH-L9i fails Prime95 and Furmark tests, when using newer CPUs.
a fan with copper heatpipes is needed for cooling.
those CPU coolers require a modified prototype, at a height of approximately 73mm.
Last edited:
We are pleased to bring to your attention a new case! In the photo, the prototype and we have already planned some changes, namely:
1. Remove the ventilation hood from the front.
2. Add some mounting holes.
3. Make similar vent holes in the floor and back cover.
4. Add an internal partition separating the graphics card from the motherboard. (not exactly)
Perhaps you will tell me what needs to be changed.
case SLIM M2 8.1L prototype
PHOTO ALBUM (is not yet available for order. testing)
Specs:
- Volume: 8.05L (330mm x 305mm x 80mm)
- Weight 1.8kg
- The CPU faces up and the GPU faces up
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <298mm, height <130mm < 42mm
- CPU Cooler: up to 58mm or aio radiator 120mm (Corsair H60 compatible) only SFX PSU and GPU to 170mm
- RAM: up to 60 mm
- Storage: M.2 and options below
1) HDD: 1 x 3.5" (it is possible to install the button in front and USB ports)
2) HDD: 1 x 3.5" and 2 x SSD/HDD: 1 x 2.5" (without USB ports, the back-up button)
3) SSD/HDD: 2 x 2.5" and FAN 80,92,120 x 25mm (it is possible to install the button in front and USB ports)
4) SSD/HDD: 4 x 2.5" and FAN 80 x 25mm (it is possible to install the button in front and USB ports)
5) SSD/HDD: 6 x 2.5" (without USB ports, the back-up button)
- PSU: SFX/SFX-L
- PCIe riser: LiHeat 350mm B.type
1. Remove the ventilation hood from the front.
2. Add some mounting holes.
3. Make similar vent holes in the floor and back cover.
4. Add an internal partition separating the graphics card from the motherboard. (not exactly)
Perhaps you will tell me what needs to be changed.
case SLIM M2 8.1L prototype
PHOTO ALBUM (is not yet available for order. testing)
Specs:
- Volume: 8.05L (330mm x 305mm x 80mm)
- Weight 1.8kg
- The CPU faces up and the GPU faces up
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <298mm, height <130mm < 42mm
- CPU Cooler: up to 58mm or aio radiator 120mm (Corsair H60 compatible) only SFX PSU and GPU to 170mm
- RAM: up to 60 mm
- Storage: M.2 and options below
1) HDD: 1 x 3.5" (it is possible to install the button in front and USB ports)
2) HDD: 1 x 3.5" and 2 x SSD/HDD: 1 x 2.5" (without USB ports, the back-up button)
3) SSD/HDD: 2 x 2.5" and FAN 80,92,120 x 25mm (it is possible to install the button in front and USB ports)
4) SSD/HDD: 4 x 2.5" and FAN 80 x 25mm (it is possible to install the button in front and USB ports)
5) SSD/HDD: 6 x 2.5" (without USB ports, the back-up button)
- PSU: SFX/SFX-L
- PCIe riser: LiHeat 350mm B.type
Last edited:
will it work like this :
Volume : 7.5L ( 325mm x 300mm x 77mm )
GPU : length <293mm, depth <130mm, height <42mm
Last edited:
I can not make 300mm. 305 this minimum otherwise does not fit the PSU
will it work like this :
Volume : 7.5L ( 320mm x 305mm x 77mm )
GPU : length <298mm, depth <130mm, height <42mm
Case SLIM M2 is already available to the order. We have slightly reduced the size, having revised the location of the components.
- Volume: 7.6L (325mm x 305mm x 77mm)
- Price: $199 (Case -10%+ PCIe riser + Worldwide Shipping)
- Volume: 7.6L (325mm x 305mm x 77mm)
- Price: $199 (Case -10%+ PCIe riser + Worldwide Shipping)
At this size, you will need to use special angular connectors to power the graphics card.
we need 7.5L size.
will it work like this :
case SLIM M2 7.5L rev. 6.2
Specs:
- Volume: 7.5L ( 323.5 mm x 305 mm x 76 mm )
- Weight 1.8kg
- The CPU faces up and the GPU faces up
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <298mm, height <130mm <42mm
- CPU Cooler: up to 53mm or aio radiator 87mm (Asetek 545LC 92mm compatible) only SFX PSU and GPU to 170mm
- RAM: up to 60 mm
- Storage: M.2 and options below
1) HDD: 1 x 3.5" (it is possible to install the button in front and USB ports)
2) HDD: 1 x 3.5" and 2 x SSD/HDD: 1 x 2.5" (without USB ports, the back-up button)
3) SSD/HDD: 2 x 2.5" and FAN 80,92,120 x 25mm (it is possible to install the button in front and USB ports)
4) SSD/HDD: 4 x 2.5" and FAN 80 x 25mm (it is possible to install the button in front and USB ports)
5) SSD/HDD: 6 x 2.5" (without USB ports, the back-up button)- PSU: SFX/SFX-L
- PCIe riser: LiHeat 350mm B.type
- Price: $199 (Case -10%+ PCIe riser + Worldwide Shipping)
- Payment method: PayPal
Last edited:
Hello friends!
For a long time we solved the problem of screws. We wanted to remove them from the prominent parts of the buildings. But we can not remove everything. But we can offer more beautiful screws. They are more expensive than ordinary ones.
They are screws made of aluminum with a hex screwdriver. Not everyone has this and this is a problem. We offer to supply a hexagonal wrench with 2 mm screws.
Such screws can be ordered in different colors, which will make your case more beautiful.
Write your opinion. For us it is very important!
For a long time we solved the problem of screws. We wanted to remove them from the prominent parts of the buildings. But we can not remove everything. But we can offer more beautiful screws. They are more expensive than ordinary ones.
They are screws made of aluminum with a hex screwdriver. Not everyone has this and this is a problem. We offer to supply a hexagonal wrench with 2 mm screws.
Such screws can be ordered in different colors, which will make your case more beautiful.
Write your opinion. For us it is very important!
Last edited:
