Production cases: SLM1m/ SLM1 4L/ SLM2 5.7L by Custom_MOD

[Instran0]

Why these extra 20mm?

probably to fit cables, wires, and etc.

but 349mm is the standard length now.

 

[sergiiua]

Today we got a PCIe riser: LiHeat 300mm A. type. In size, it is ideal. Now the SLIM M2 7.5L cases

will be equipped with this train

 

[sergiiua]

Soon you will receive tracking numbers.

 

[Instran0]

Write your opinion. For us it is very important!

you can make 5L case, that fits copper heatsink for cooling.


try this :


- Volume: 5L (345mm X 230mm X 73mm)

 

[paullusty]

you can make 5L case, that fits copper heatsink for cooling.


try this :



case SLIM itx 5L rev.5.1 prototype (is not yet available for order. testing)

Specs:
- Volume: 5L (330mm x 196mm x 78mm)
- Weight 1.3kg
- The CPU faces up and the GPU faces up
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <189mm, height <130mm
- CPU Cooler: up to 53mm
- RAM: up to 55 mm
- Storage: M.2 and options below
- SSD/HDD: 1 x 2.5" 5-15mm or 1 x 3.5"HDD
- PSU: external G-Unique pico 400W or G-Unique 300watts HP 80plus platinum internal module + pico type A 300W
- PCIe riser: LiHeat 300mm A.type

yo, we get it. you want a custom sized case, just message him directly...

 

[sergiiua]

Hello, friends!

A few new photos of the prototype SLIM M2

[MEDIA = Imgur] а / xGqVb [/ MEDIA]

 

[michelbrt]

I'm interested in version 3.7.
Can I install behind the monitor? Is there any kind of support for this type of installation?

 

[koramas]

I'm curious, if you used a short card like a Zotac 1050ti Mini, would there be room for a HDPlex internal AC-DC adapter behind the card?

 

[alucard0712_rus]

How about temps compared to Skyreach? Someone says the case can't even do a 65w CPU. I have 84w i7-4770k+Nh-9i and MSI 1060 Aero (will upgrade to 1070)

 

[Instran0]

I'm curious, if you used a short card like a Zotac 1050ti Mini, would there be room for a HDPlex internal AC-DC adapter behind the card?

i own several prototype cases.

the internal PSU goes under your video card, not behind it.

 

[Instran0]

How about temps compared to Skyreach? Someone says the case can't even do a 65w CPU. I have 84w i7-4770k+Nh-9i and MSI 1060 Aero (will upgrade to 1070)

a prototype case can cool any CPU under 91W.

my temps were good.

you'll need a CryOrig C7 though.

as discussed above, a 5L prototype measuring 345mm X 230mm X 73mm, should fit a CryOrig C7.

 

[Jordy]

How can i order the 3.7L ITX case?

 

[Instran0]

i have a few extra of these cases.

 

[sergiiua]

How can i order the 3.7L ITX case?

Please fill this form if you want to make an order.

 

[dumplinknet]

i have a few extra of these cases available, & i've never used them, if any one is interested.

Where are you from?

 

[Instran0]

Where are you from?

USA.

 

[Extractus]

i have a few extra of these cases available, & i've never used them, if any one is interested.

I definitely would be .

 

[Instran0]

I definitely would be .

PM me.

 

[sergiiua]

Hello friends!

Since the current design of the case is difficult to produce, we stopped production. Now we are working on a new design. Soon we will show you the prototype.

If you want to make an order for the old case you can write us a message.

 

[Instran0]

i've ordered more than 10 of sergiiua's cases, & almost all of them were extremely good quality.

including the old SLIM models, in this thread.

only one NANO case was mis-measured.

i highly recommend sergiiua's cases.