It should, reported mounting dimensions were the same for Cu and I would imagine the C7G would be the same. I will supply a 3d printed washer/plate that should make it compatible. The stock one is a bit too thick.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Production AM4 Brackets for CPU Coolers (C7 + others)
- Thread starter Thehack
- Start date
-
- Tags
- am4 bracket cryorig c7
It should, reported mounting dimensions were the same for Cu and I would imagine the C7G would be the same. I will supply a 3d printed washer/plate that should make it compatible. The stock one is a bit too thick.
Cryorig C7 AM4 90 Degree Bracket - J-HACK
Bracket turns your Cryorig C7 90 degrees. This aligns the CPU cooler fins with the RAM slots, ensuring the airflow in the correct direction. It uses the stock mounting hardware and includes 3D printed washer plate for better clearance/compatibility. *MODIFY YOUR COOLER AT YOUR OWN...j-hackcompany.com
Product page. I added stock level, but I'll be busy and won't ship until next week. May be without photos for a while.
Thanks! ordered!
Yes... Kinda. The C7 stock backplate is so bad and makes it hard to install. There needs to be enough spacing to create tension as well.
You only need AM4 Socket holes distances and Zalman brackets holes, thank you can make what you prefer for the design.
Be careful with Brackets material, you are near the cpu and PLA melts very easily...
It wouldn't be hard to.
You can PM me but I'll have to see how difficult the mounting mechanism is.
No reason it shouldn’t be - the C7g is just graphene coated. Ultimately it’s the same thing, with the same mounting system and same brackets and compatibility
I just fulfilled all the orders for the bracket.
I'll wait for some feedback before increasing stock level. Let me know if you have any fitment problems or any issues to report.
I'll wait for some feedback before increasing stock level. Let me know if you have any fitment problems or any issues to report.
BE VERY CAREFUL TORQUING THE NUTS AT THE END.
Last edited:
I just pre-ordered the c7 from overclokers and was wondering if you had any of these available or plan on making them again?
I do have more but I'm waiting on some feedback to ensure they're good to go.
Just FYI I ordered a C7G from OCUK about a month ago and they have yet to ship it
Also, @Thehack I got my brackets, and backplate. They look good so far. I'll update once I get my C7G and actually mount it, but thanks again for being so quick about shipping this out, and for the communication and good craftsmanship
I really appreciate it. was pretty nervous because I'm new to the SFF Forums, and it's my first time buying from someone in this community. 10/10 dude.
Same boat.Just FYI I ordered a C7G from OCUK about a month ago and they have yet to ship it
I will try to use it on my aluminum c7 on my 1600 to see if I have any temp difference this weekend Maybe.I see that on overclockers website the estimated ETA for the C7 is 9/20. We might still have to wait a bit.
I will increase stock level later by 3 if any others would like to order.
Please leave some feedback when you get it.
Please leave some feedback when you get it.
I made a 3D-printed adapter for that.
All you need is a standard #2 pencil.
It's a bit odd, but so far it's working for me:
Download Big Shuriken 2 AM4 Pencil-Adapter von Markus Grine
Big Shuriken 2 (Rev. B) - AM4 mounting Use at your own risk! DO NOT use graphite pencils due to high conductivity!!! USE non conductive coloured pencil instead!!! Print in ABS! May work on other coolers, too. Temps on Ryzen 7 3700X (@stock, without case, 23°C ambient): - max. 73°C after...
www.myminifactory.com
Does that work for the rev b?I made a 3D-printed adapter for that.
All you need is a standard #2 pencil.
It's a bit odd, but so far it's working for me:
Download Big Shuriken 2 AM4 Pencil-Adapter von Markus Grine
Big Shuriken 2 (Rev. B) - AM4 mounting Use at your own risk! DO NOT use graphite pencils due to high conductivity!!! USE non conductive coloured pencil instead!!! Print in ABS! May work on other coolers, too. Temps on Ryzen 7 3700X (@stock, without case, 23°C ambient): - max. 73°C after...
