case

Just as the title says: is there any interest in a case roughly the volume of the Ncase M1, but capable of holding two 30mm thick 280mm radiators? I am in the (early) process of creating such a case for myself; but since I'll be doing the work of creating the case anyway, I wanted to gauge...

Hi all mentioned this before, but didn't get great responses so trying again. Looking for a PC case for itx but with decent cooling a must. in essence I'm looking for a case that is small but provides lots of cooling as the area usually dedicated to fit a large graphics card is instead used...

I have been waiting for a V6 for some time now, and it seems like it isn't going to be ready till September, (Necere said late July early August at best) I want to build my PC 7/7 with a new 3900x, and am not looking to have my pc parts sitting on the table for another 2 months.. I would like...

*** MOD EDIT ------------ Original poster last seen on the forum on Feb 24, 2021 & does not seem to be responsive. Product/order related pages in the Dice website are now either inactive or password protected. At the time of this post, it seems that there are some people still waiting for...

Introduction: We have been working on a passivly cooled STX design lately. This form factor has gained quite some interest since ASRock has launched its DeskMini A300. The DeskMini A300 is a nice SFF Barebone system based on the AMD Ryzen CPUs with a powerful Vega 11 GPU integrated. The idea...

I think both of these cases but the only thing I am concerned with is someone said that the power button felt cheap on the F1C evo and I curious on how solid the lid feels since it seems on both of them they are clipped on. (I preferred the Realan H80 where you screwed on the top lid) If you...

Hello everyone, I am Simon and I am a mechanical engineer from Germany. I've been building some "Mini PC's" lately, but I wasn't really pleased with it. The cases that I have seen and / or installed were either too big for me or you could only sheet a 2 slot GPU or no AIO ... For this reason, I...

The A300 DeskMini has just been released and I have been thinking about this for some time, but now I think it's a good time to discuss my next case concept which will be designed around mini STX boards, especially for APU builds. At a volume of 1.8 liters, this case will fit mini STX boards...

Good morning, I have been lurking these forums for a while now and finally decided to make an account to get some advise on a build I have been wanting to do for quite some time. I'm looking to build a portable (as in easily transportable by bike) powerhouse that supports an overclocked i7...

Hi guys, I recently came into possession of a pre-built PC. It came with a unbranded ATX case and I'm looking to downsize into SFF if possible. However, I've taken a look around pcpartpicker and having done some research, it seems that there are not many Build threads with the MSI 2080 Gaming...

Recently i have been looking at the K39 itx case 3.98L and the only thing that it seems to lack (IMO) is a bit of space for fans, hard drives and optionally a bigger gpu, about nearly 3 years ago i suggested a expandable itx case to corsair but haven't heard anything about it since... (...

I have an unused S4 Mini with all the add ons in mint condition, my plans changed and i'm now unable to use it. Also have a left over EVGA gtx770 SC 2gb from a previous build im trying to sell. S4 Mini with Add ons: 250$ GTX 770: 85$ Would be willing to trade for a Ncase M1 as well. I could...

After project Pure I am working on my next case to address some of the needs/wants of the community in builds. The layout has the gpu and cpu fans on the same side. The goal of this case is reliably power a 400W of components in the smallest size possible. CPU Cooler: 40mm, Noctua NH-L9i GPU...

Hello, Following the release of the J-HACK PURE, I am currently working on the PURE XL. A large version that supports LP GPUs and FLEX ATX PSU. It is not the smallest LP case, but it is designed to be more flexible and built for people who require a lil' bit more CPU processing power. Specs...

Hey guys! I want to share with you my idea. Maybe here it will be interesting to someone. A little background. I started to monitor different startups, starting with N-CASE, then DAN CASES a4-sfx, NFC S4 MINI, DR ZABER CENTRY. These are very cool projects and they are unique each in its own...

Hey Sff-Freaks, I am pretty new to the SFF scene with my Node202 build from this summer. But sadly the GPU temps and CPU fan noise weren't that great and thought about a better way to layout the components. Used it as an excuse to drain my hours in Sketchup and measured with that Box: By...

The purpose of this case is to be the smallest case that can fit a standard Mini ITX motherboard, 65 W TDP CPU cooler such as the Noctua NH-L9a/i, and DC-DC power supply such as the Pico PSU. Top priorities: Size Appearance The case will look best when set flat as shown in the first picture...

Prototype and volume manufacturing are available. Please submit your files in STEP, IGS, IGES, SLDPRT, SLDASM, or STL. I cannot accept SKP (Sketchup) files. If you are using Protocase designer to design your enclosure, you can export the project as a STEP file. Materials Steel...

Hey all, I want to try my luck at snagging a deal on a premium sff case! Something along the lines of the Dan Case/Ncase, but even the ranks of Case Mod will do. Pretty much a beginner at this stuff, but let me know what deals can be had! For coolers, I am looking for something that is decent...

Hi everyone! Sorry for my bad english, i'm from Ukraine. I would like to share my SFF Build, because i didn't find anything of this kind on the forum. In my opinion Jonsbo V3+ case is perfect balance between case size, cooling capabilities and performance per liter. Of course, not without some...