What did you do today?

[GuilleAcoustic]

Do you know what's worse? SSI-EEB!

SSI-EEB has at least always more than one CPU and often have 8x or more DIMM slots.

They are targeted at server and meant for high density (many expansion cards), unlike E-ATX that is most of the time a Trololo gamurz gimmick .

Also..... All hail the half SSI-EEB greatness

 

[confusis]

Half SSI FTW!

 

[el01]

What would be even better? SSI EEB Half-Size with 2 SP3 sockets! YAAAAY!!!


Also, the chipset heatsink design on that LGA2011 board looks like the one on one of my AMD K6 m-ATX motherboards...

At least it's better than the modern art pieces on VRMs in modern boards...

Here's the perfect VRM heatsink (by ASUS, ASRock, Gigabyte, and MSi standards

But with moar RGB, more gamer logos on it, etc.

 

[Windfall]

Actually, the power density isn't bad on those dual-and tri-socket boards.....

 

[el01]

@Biowarejak

FreeCad is still doing it... It's probably me being an idiot... How do you do the thing you told me about?

Not much happened today for me. Breakfast, school, lunch, school, homework, dinner, homework, now.

 

[Biowarejak]

@Biowarejak

FreeCad is still doing it... It's probably me being an idiot... How do you do the thing you told me about?

Not much happened today for me. Breakfast, school, lunch, school, homework, dinner, homework, now.

If there's another solid in the part tree you'll know because when you have everything collapsed down in the tree there's going to be multiple pieces at the end. Click on each and hit spacebar, but leave the bottom one alone.

 

[GuilleAcoustic]

With the money I got for my birthday, I ordered a DAC and headphone amp.

First piece of my new rig, I'll finally be able to properly drive my AKG K701 and my Mezze 99 Classic headphones with an Audio-GD R2R-11.

 

[Windfall]

With the money I got for my birthday, I ordered a DAC and headphone amp.

First piece of my new rig, I'll finally be able to properly drive my AKG K701 and my Mezze 99 Classic headphones with an Audio-GD R2R-11.

For a second I thought that was a Nano-ITX PC.
And Happy Birthday!

 

[el01]

If there's another solid in the part tree you'll know because when you have everything collapsed down in the tree there's going to be multiple pieces at the end. Click on each and hit spacebar, but leave the bottom one alone.

oh jeez rick im not sure about that that sounds hard rick


m o r t y



I'll try that after I get my homework done. One of the teachers decided to assign a whole chapter's worth of notes. Ugh.

 

[el01]

@Biowarejak

It didn't work, but I gave up and just used wireframe view YAAAY!

Today was kinda chill. I'm tired from yesterday, so I woke up at 10:30 today! Had meals at completely wrong times, did homework, SFF Forum, and FreeCad!

 

[Soul_Est]

Intended to go into to my second job today but the heat laid me out with a bad headache. Now getting some of that work done at home. After a week of working with Arch Linux on Full Circle, I switched to Windows 10 to start sorting out the hardware's power consumption. I will start updating the thread from today actually.

@Biowarejak @el01 @GuilleAcoustic
Perhaps we should have a FreeCAD tips and tricks thread?

 

[Biowarejak]

Intended to go into to my second job today but the heat laid me out with a bad headache. Now getting some of that work done at home. After a week of working with Arch Linux on Full Circle, I switched to Windows 10 to start sorting out the hardware's power consumption. I will start updating the thread from today actually.

@Biowarejak @el01 @GuilleAcoustic
Perhaps we should have a FreeCAD tips and tricks thread?

Lol yes we should, i still gotta get a couple thibgs finished for the first tutorial. Literally a case-by-case basis.

 

[Soul_Est]

Lol yes we should, i still gotta get a couple thibgs finished for the first tutorial. Literally a case-by-case basis.

I don't doubt that at all given my stint with it. lol Going forward, I plan to look into how to best use the Sheetmetal Workbench to accelerate modelling sheetmetal designs.

 

[Biowarejak]

I don't doubt that at all given my stint with it. lol Going forward, I plan to look into how to best use the Sheetmetal Workbench to accelerate modelling sheetmetal designs.

Yeah first one is acrylic, next is sheet metal. It's a process lol.

 

[el01]

Yeah first one is acrylic, next is sheet metal. It's a process lol.

rn i just realized i did the screw holes in my design wrong: i did 3mm radius instead of 3mm diameter for m3 screws. press f to pay respects.

 

[el01]

I don't doubt that at all given my stint with it. lol Going forward, I plan to look into how to best use the Sheetmetal Workbench to accelerate modelling sheetmetal designs.

Ayy it's like Gentoo/Arch setup all over again!

 

[tinyitx]

I did 'nothing' today. Just watched some tv drama online. So tired.

Why am I so tired even I did nothing? Because Typhoon Mangkhut (Category 5, folks....serious business!) hit South China coast on Sunday. I spent that whole day doing hand-to-hand combat with water seepage problem. When you get older, you really need more than just 1 day to recover.

 

[AleksandarK]

@tinyitx I just hope everything is good and you recover quickly!!!

 

[confusis]

So, my workload at my day job has dramatically dropped (FINALLY), so I'm back on the content train. Articles published, news posts are back, and I have a lot of cool stuff in the pipeline. w00t!!

 

[Windfall]

So, my workload at my day job has dramatically dropped (FINALLY), so I'm back on the content train. Articles published, news posts are back, and I have a lot of cool stuff in the pipeline. w00t!!

More like w0000000000t!!!!

Or something.