Thanks! If I'm able to get my hands on one before Christmas, I can live with that.
Prototype The world most flexible SFF case? LOUQE Ghost S1
- Thread starter PaChalski
- Start date
Thanks! If I'm able to get my hands on one before Christmas, I can live with that.
I’m sure they pay the taxes. In that way it’s cheaper instead Of everyone doing it individually. But I don’t know
Yeah that’s what I’m aiming fo as well . then the new intel processors will be avaiable and also all new Nvidia RTX cards.
Keep me updated pls! Myself, I plan to fill the case with AMD/Ryzen goodness. <3
Its far bigger than the louqe case, even when you use all the tophats. At least you can fit a 3.5" drive and AIO with the large and medium tophats and it will still be smaller. Plus the finish of the louqe still looks better.
plus it just looks like shit, 2005. Nasty brusted metal, ugly buttons. Like with all their cases Super tacky. But the prices are sure good. But not really comparable product att all.
For the new GeForce RTX 2080 Ti Series minimum recommended system power is 650W.
For the old GeForce GTX 1080Ti Series minimum recommended system power was 600W.
I hope Louqe team understand that the delay its coming with more problems cause i don't this that they will going for GPU compatibility test again. Some people from this forum get some parts ( GPU,PSU,CPU ) and now they are all old cause new GPU is released new PSU ( platinum series is released ) now coming also new Intel CPU Series.
All new GeForce RTX 20 Series : Asus , Gigabyte , MSI , Zotac , Palit , Gainward , INNO3D and PNY Quadro RTX
For the old GeForce GTX 1080Ti Series minimum recommended system power was 600W.
I hope Louqe team understand that the delay its coming with more problems cause i don't this that they will going for GPU compatibility test again. Some people from this forum get some parts ( GPU,PSU,CPU ) and now they are all old cause new GPU is released new PSU ( platinum series is released ) now coming also new Intel CPU Series.
All new GeForce RTX 20 Series : Asus , Gigabyte , MSI , Zotac , Palit , Gainward , INNO3D and PNY Quadro RTX
Might have to opt for the 700w SFX-L PSU. Personally i'm not affected too much, as all i need is a new PSU. Going to use my current rig in the Louqe. Currently have a 1080Ti. I'll reserve judgement on real world benchmarks for the 2080 and 2080Ti. I think Nvidia are claiming at least 50% performance increase, and that the 2070 will be the same as a 1080Ti. But what was missing from the lunch event where FPS benchmarks. If the claims of over 50% performance increase were true, then the 2080Ti will run all current games on ultra @ over 60FPS. But they did't show this. Plus at £1,100 its simply not on my to buy list. My guess is that Nvidia will release new cards in a year for i'll wait for that generation.
no one ever said that.
if you look at their specs the 2080 will be most likely slower than the 1080ti (reason why they released the ti version at launch for the first time)
same goes for the 2070 that has faster memory than the CHEAPER 1080 but less and slower cuda cores...
il will be most likely like this
2080ti>1080ti>2080>1080>2070
This might have been answered before, but I haven't been able to find the answer:
The spec sheet implies that you can fit 3 2.5" SSD/HDD's in the Ghost 1. Two of them go in the tray (which I would prefer to remove for a 120 mm fan) and the last one goes.... where? Am I blind?
The spec sheet implies that you can fit 3 2.5" SSD/HDD's in the Ghost 1. Two of them go in the tray (which I would prefer to remove for a 120 mm fan) and the last one goes.... where? Am I blind?
You'll be saving for a while. Sheesh that's a lot of dough for a gaming card that'll be obsolete in 5 years.
Most likely you are right. Looks like the new cards just offer better shadows with a slight bump in fps. Plus i'm not too keen on the wattage jump from 500w to 650w!!!
Last edited:
You need the small top hat to fit 3 hard drives. Only one drive cage is provided under the PSU. If you use a SFX PSU you might be able to fit two by stacking the second drive on top of the cage with some double sided tape. I am thinking of doing this, by using a 2.5 HDD in the cage and a SSD stuck on top. Will wait and see if it fits.
Similar threads
