Production No more sandwich. W19. Up to 360AIO and custom loop. Up to full size 3-slot gpu. DDC pump. Ready for uncompromise watercooled in 10.5L console case.
- Thread starter SammyXXM
- Start date
I'm interested in the W19 as well! How does one help fund? How to contribute. Do we have any prototype videos? Any more info on the novel high efficiency cooling solution?
D17 starts first. The fund will be collected through indiegogo. Videos will appear on the site shortly after the launch. Information about cooling not yet available due to patenting process.
Last edited:
Interested! Is the W19 meant to support watercooling the GPU? Any renders?
W19
GPU size up to 330x130x63 (in 240rad mode or with air cooling) or 217x130x63 (in 360rad mode at full power)
130mm height is not sufficient to water-cool even 3080 FE due to the terminal at the top which adds ~25mm height. Maybe the EK block could work with G1/4 on the side, but that might exceed the 217mm length.
W19
GPU size up to 330x130x63 (in 240rad mode or with air cooling) or 217x130x63 (in 360rad mode at full power)
130mm height is not sufficient to water-cool even 3080 FE due to the terminal at the top which adds ~25mm height. Maybe the EK block could work with G1/4 on the side, but that might exceed the 217mm length.
Last edited:
130mm is on pcie side, EK has terminal od rad side.
2070 with block has 180mm, so it's less than 217mm. But more on side with pcie, BCS there is terminal. I saw lately slim terminal from barrow. Maybe this is solution fol older rtx. 30xx series should be fine.
2070 with block has 180mm, so it's less than 217mm. But more on side with pcie, BCS there is terminal. I saw lately slim terminal from barrow. Maybe this is solution fol older rtx. 30xx series should be fine.
Unfortunately, there is a lot of outdated information in the main thread. After preodrer start, all information will be brought in line with current specifications
Last edited:
According to your choice please point at the case you want to buy. I will adjust the product roadmap
I wan't to buy the W19. If that secret cooling tech is available for it aswell I'd be very interested in that too
All cooling technologies have long been known and are very limited by the laws of physics) All that remains is to manipulate their combinations and the ingenuity of the inventor. Separately, the cooling system will be available in classic form factors e.t. 120mm, 240 , 360... But do not expect miracles, the efficiency is higher by 15-20% compare to watercooling. The main feature is no water, leaking, resirvoirs and no noisy pump.
Last edited:
Any chance we could siphon some more information about that new cooling solution?
The thermosiphon is just a simplified solution of a heat pipe system. In my system, everything is much more interesting.
Last edited:
