Production No more sandwich. W19. Up to 360AIO and custom loop. Up to full size 3-slot gpu. DDC pump. Ready for uncompromise watercooled in 10.5L console case.

[SammyXXM]

Testers still needed. If you don't have required components, write to PM you possible config. Only pumps and radiator strongly required.

 

[Vir]

Depends on what testing entails - and if/what it costs.

 

[SammyXXM]

Depends on what testing entails - and if/what it costs.

Do you mean the possibility of receiving an award or the necessary action?

 

[Vir]

Do you mean the possibility of receiving an award or the necessary action?

The latter. What would it require from a tester?

 

[SammyXXM]

The latter. What would it require from a tester?

The tester requires alphacool components (at least a pump), except for the air configuration and videoreport with termal/usability tests. The case will cost about 195 € (depending on configuration).

 

[revan]

Looks very nice, I'm certainly interested. My current setup is air-cooled otherwise I'd be down to test.

 

[Sen]

That fabric mesh design is gorgeous - another case to make 2021 even harder for case shopping.

 

[SFF Watercooled]

Which riser cable will you be using for the D17?

 

[SammyXXM]

Which riser cable will you be using for the D17?

Riser will be custom and included.

 

[SammyXXM]

Looks very nice, I'm certainly interested. My current setup is air-cooled otherwise I'd be down to test.

Yes, air cooling will be interesting too. Please, tell yor config.

 

[paulesko]

Hello. I don´t mind testing, I find it very entertaining, but I live in Europe I don´t know whether that´s a problem or not, because if you have to send things from the EEUU... it´s not going to be practical.

I have a eisbaer LT 240 with two pumps (2600 and 3600 model) Also have a xspc TX240 20mm thcik radiator a hardware labs gts 240 a gtx 240 25 mm fans I have noctuas NF-A, also the 15 mm model, and some oldies but goldies gentle typhoon.

As long as hardware goes I use a 3950x in a miniitx board (gigabyte x570i) and a 5700 xt which I´m planing to change for a 3080 whenever there is stock...

Other things that could be usefull I have are the top + reservoir unit for the dc-lt (the small model, something 40) and a ddc pump that I use in my day to day pc. I could buy a top for it, no problem. But the main problem I see is that I live in Europe and you may not. :/

 

[SammyXXM]

Hello. I don´t mind testing, I find it very entertaining, but I live in Europe I don´t know whether that´s a problem or not, because if you have to send things from the EEUU... it´s not going to be practical.

I have a eisbaer LT 240 with two pumps (2600 and 3600 model) Also have a xspc TX240 20mm thcik radiator a hardware labs gts 240 a gtx 240 25 mm fans I have noctuas NF-A, also the 15 mm model, and some oldies but goldies gentle typhoon.

As long as hardware goes I use a 3950x in a miniitx board (gigabyte x570i) and a 5700 xt which I´m planing to change for a 3080 whenever there is stock...

Other things that could be usefull I have are the top + reservoir unit for the dc-lt (the small model, something 40) and a ddc pump that I use in my day to day pc. I could buy a top for it, no problem. But the main problem I see is that I live in Europe and you may not. :/

What a problem send a thing from moldova to europe? Moldova is a part of Europe. I'm seriosly don't now. If it makes it easier for you, I can send equipment from Romania.

 

[revan]

3700X
5700XT
Cryorig C7G


5800X/6800XT upgrade in December

 

[eedev]

They both look really cool!

 

[Ezzoud]

What is the distance between the 360 rad and mobo?

 

[SammyXXM]

What is the distance between the 360 rad and mobo?

36.35mm

 

[yimg]

Those are some tight bends in the coolant lines going around the rad fans in the D17. Are you worried about kinking?

 

[SammyXXM]

Those are some tight bends in the coolant lines going around the rad fans in the D17. Are you worried about kinking?

I have some doubts. It will be clear on prototype.

 

[robbee]

Those are some tight bends in the coolant lines going around the rad fans in the D17. Are you worried about kinking?

Could always use fittings, although that's gonna be expensive

 

[Runamok81]

Console cases for the win. Thank you for this design, @SammyXXM Some questions... Will this case support GPU water cooling? Will it support twin CPU/GPU water cooling with something like an aphacool eisbauer setup?