can anyone cofirm good fit without front panel IO and deshrouded?
GIGABYTE GeForce RTX 4070 Ti SUPER Gaming OC 16G (https://geizhals.de/gigabyte-geforc...-oc-16g-gv-n407tsgaming-oc-16gd-a3097288.html)
ASUS ProArt GeForce RTX 4080 SUPER OC, PROART-RTX4080S-O16G (https://geizhals.de/asus-proart-gef....html?hloc=at&hloc=de&hloc=pl&hloc=uk&hloc=eu)
-
Join the Discussion - To hell with nVidia's definition of SFF ready. What should be the actual SFF standard?
NCASE M1 V6 GPU Compatibility List
- Thread starter Necere
- Start date
So besides powercolor reaper and gigabyte XT Gaming OC RX 9070XT is there any other AMD 9070XT cards that would fit the ncase m1?
Just confirming that the Gigabyte 9070 non-XT card fits. I have an older M1 V2, unmodified, no fancy cables or cable management. I had to remove the front panel cover, front bottom feet, and front port assembly to get the card into the case - you'll have to angle the card in, and I needed the hole in the front of the case unobstructed to do it - but once it was in I was able to put the ports back.
The Gigabyte 9070 XT card is the same length and width, but listed as 6mm thicker. Looking at the end of the card in my case, I think the XT card could fit but it's going to be right up on the cable coming out of the front panel for the dual USB ports. See attached bad picture.
The Reaper is shorter and should fit no problem. The Sapphire Pulse 9070 (non-XT) should also fit easily.
The Gigabyte 9070 XT card is the same length and width, but listed as 6mm thicker. Looking at the end of the card in my case, I think the XT card could fit but it's going to be right up on the cable coming out of the front panel for the dual USB ports. See attached bad picture.
The Reaper is shorter and should fit no problem. The Sapphire Pulse 9070 (non-XT) should also fit easily.
Similar threads
